Out of Stock

LC1D115004B7

Telemecanique - Contactor

Current response time:

12 Minutes 22 Seconds

*Santa Clara Systems is not a Telemecanique Authorized Distributor.

Description: Contactor
Product weight: 6.31 lb(US) (2.86 kg)
Range of product: TeSys D
IP degree of protection: IP20 front face conforming to IEC 60529
Standards: CSA C22.2 No 14EN 60947-4-1EN 60947-5-1IEC 60947-4-1IEC 60947-5-1UL 508
Device short name: LC1D
Width: 5.91 in (150 mm)
Height: 6.22 in (158 mm)
Depth: 5.2 in (132 mm)
Protective treatment: TH conforming to IEC 60068-2-30
[Ui] rated insulation voltage: 1000 V power circuit conforming to IEC 60947-4-1600 V power circuit certifications CSA600 V power circuit certifications UL
[Uimp] rated impulse withstand voltage: Conforming to IEC 60947
Operating altitude: 9842.52 ft. (3000 m) without derating in temperature
Mechanical durability: 8 Mcycles
Tightening torque: Control circuit: 10.62 lbf.in (1.2 N.m) - on screw clamp terminals - with screwdriver flat Ø 6 mmControl circuit: 10.62 lbf.in (1.2 N.m) - on screw clamp terminals - with screwdriver Philips No 2Power circuit: 106.19 lbf.in (12 N.m) - on connector hexagonal 0.16 in (4 mm)
Connections - terminals: Control circuit: screw clamp terminals 2 cable(s) 0...0 in² (1...2.5 mm²) - cable stiffness: flexible - without cable endControl circuit: screw clamp terminals 2 cable(s) 0...0 in² (1...2.5 mm²) - cable stiffness: flexible - with cable endControl circuit: screw clamp terminals 2 cable(s) 0...0 in² (1...2.5 mm²) - cable stiffness: solid - without cable endControl circuit: screw clamp terminals 1 cable(s) 0...0 in² (1...2.5 mm²) - cable stiffness: flexible - with cable endControl circuit: screw clamp terminals 1 cable(s) 0...0 in² (1...2.5 mm²) - cable stiffness: flexible - without cable endControl circuit: screw clamp terminals 1 cable(s) 0...0 in² (1...2.5 mm²) - cable stiffness: solid - without cable endPower circuit: connector 1 cable(s) 0.02...0.19 in² (10...120 mm²) - cable stiffness: flexible - without cable endPower circuit: connector 2 cable(s) 0.02...0.08 in² (10...50 mm²) - cable stiffness: flexible - without cable endPower circuit: connector 1 cable(s) 0.02...0.19 in² (10...120 mm²) - cable stiffness: flexible - with cable endPower circuit: connector 2 cable(s) 0.02...0.08 in² (10...50 mm²) - cable stiffness: flexible - with cable endPower circuit: connector 1 cable(s) 0.02...0.19 in² (10...120 mm²) - cable stiffness: solid - without cable endPower circuit: connector 2 cable(s) 0.02...0.08 in² (10...50 mm²) - cable stiffness: solid - without cable end
Range: TeSys
Mounting support: PlateRail
[Ith] conventional free air thermal current: 200 A at <= 140 °F (60 °C) power circuit
System Voltage: <= 460 V DC power circuit<= 1000 V AC 25...400 Hz power circuit
Operating rate: 2400 cyc/h at <= 140 °F (60 °C)
Product name: TeSys D
[Uc] control circuit voltage: 24 V AC 50/60 Hz
Electrical durability: 0.8 Mcycles 200 A AC-1 at Ue <= 440 V
[Ie] rated operational current: 200 A (<= 140 °F (60 °C)) at <= 440 V AC AC-1 power circuit
Utilization category: AC-1
Control circuit voltage limits: 0.3...0.5 Uc drop-out at 131 °F (55 °C), AC 50/60 Hz0.8...1.15 Uc operational at 131 °F (55 °C), AC 50/60 Hz

Poles description: 4P
Overvoltage category: III
Operating time: 6...20 ms opening20...50 ms closing
Associated fuse rating: 200 A gG at <= 690 V coordination type 2 power circuit250 A gG at <= 690 V coordination type 1 power circuit
Control circuit type: AC 50/60 Hz
Coil technology: Built-in bidirectional peak limiting diode suppressor
inrush power in VA: 280...350 VA at 68 °F (20 °C) (cos ? 0.8) 60 Hz280...350 VA at 68 °F (20 °C) (cos ? 0.8) 50 Hz
Pollution degree: 3
Product or component type: Contactor
hold-in power consumption in VA: 2...18 VA at 68 °F (20 °C) (cos ? 0.3) 60 Hz2...18 VA at 68 °F (20 °C) (cos ? 0.3) 50 Hz
Ambient air temperature for operation: 23...140 °F (-5...60 °C)
Heat dissipation: 3...8 W at 50/60 Hz
Ambient air temperature for storage: -76...176 °F (-60...80 °C)
Contactor application: Resistive load
Permissible ambient air temperature around the device: -40...158 °F (-40...70 °C) at Uc
Fire resistance: 1562 °F (850 °C) conforming to IEC 60695-2-1
Pole contact composition: 4 NO
Flame retardance: V1 conforming to UL 94
Mechanical robustness: Vibrations contactor open 2 Gn, 5...300 HzVibrations contactor closed 4 Gn, 5...300 HzShocks contactor closed 15 Gn for 11 msShocks contactor open 6 Gn for 11 ms
Irms rated making capacity: 1260 A at 440 V power circuit conforming to IEC 60947
Rated breaking capacity: 1100 A at 440 V power circuit conforming to IEC 60947
[Icw] rated short-time withstand current: 1100 A <= 104 °F (40 °C) 1 s power circuit250 A <= 104 °F (40 °C) 10 min power circuit550 A <= 104 °F (40 °C) 1 min power circuit950 A <= 104 °F (40 °C) 10 s power circuit
Average impedance: 0.6 mOhm at 50 Hz - Ith 200 A power circuit
Power dissipation per pole: 24 W AC-1
Protective cover: Without
Product certifications: GOSTBVULCCCCSARINALROS (Lloyds register of shipping)DNVGL
Safety reliability level: B10d = 1369863 cycles contactor with nominal load conforming to EN/ISO 13849-1B10d = 20000000 cycles contactor with mechanical load conforming to EN/ISO 13849-1

Santa Clara Systems specializes in hard-to-find parts. Choose from our overstock inventory and save on LC1D115004B7 . Santa Clara Systems carries 10,632 items from Telemecanique.