• Telemecanique ATV12HU40M3 variable speed drive ATV12 - 4kW - 5hp - 200..240V - 3ph - with heat sink Product Image
  • Telemecanique ATV12HU40M3 variable speed drive ATV12 - 4kW - 5hp - 200..240V - 3ph - with heat sink Product Image
  • Telemecanique ATV12HU40M3 variable speed drive ATV12 - 4kW - 5hp - 200..240V - 3ph - with heat sink Product Image
  • Telemecanique ATV12HU40M3 variable speed drive ATV12 - 4kW - 5hp - 200..240V - 3ph - with heat sink Product Image
  • Telemecanique ATV12HU40M3 Barcode

ATV12HU40M3

Get a Quote

Current response time:

12 Minutes 32 Seconds
  • Description: variable speed drive ATV12 - 4kW - 5hp - 200..240V - 3ph - with heat sink
  • Product weight: 4.41 lb(US) (2 kg)
  • Range of product: Altivar 12
  • IP degree of protection: IP20 without blanking plate on upper part
  • Width: 5.51 in (140 mm)
  • Height: 7.24 in (184 mm)
  • Depth: 5.56 in (141.2 mm)
  • Operating altitude: > 3280.84...9842.52 ft. (> 1000...3000 m) with current derating 1 % per 100 m, <= 3280.84 ft. (1000 m) without derating
  • Tightening torque: 10.62 lbf.in (1.2 N.m)
  • Vibration resistance: 1 gn EN/IEC 60068-2-6 13...200 Hz, 1.5 mm peak to peak EN/IEC 60068-2-6 3...13 Hz drive unmounted on symmetrical DIN rail
  • Shock resistance: 15 gn EN/IEC 60068-2-27 11 ms
  • Electrical connection: Terminal 5.5 mm AWG 10 L1, L2, L3, U, V, W, PA, PC
  • motor power kW: 4 kW
  • [Us] rated supply voltage: 200...240 V - 15...10 %
  • Relative humidity: 5...95 % without condensation IEC 60068-2-3, 5...95 % without dripping water IEC 60068-2-3
  • Protection type: Against input phase loss in three-phase, Thermal motor protection via the drive by continuous calculation of It, Line supply overvoltage, Line supply undervoltage, Overcurrent between output phases and earth, Overheating protection, Short-circuit between motor phases
  • Switching frequency: 2...16 kHz adjustable, 4...16 kHz with derating factor
  • Supply frequency: 50/60 Hz +/- 5 %
  • Electromagnetic compatibility: Immunity to conducted disturbances level 3 EN/IEC 61000-4-6, Surge immunity test level 3 EN/IEC 61000-4-5, Voltage dips and interruptions immunity test EN/IEC 61000-4-11, Electrical fast transient/burst immunity test level 4 EN/IEC 61000-4-4, Electrostatic discharge immunity test level 3 EN/IEC 61000-4-2, Radiated radio-frequency electromagnetic field immunity test level 3 EN/IEC 61000-4-3
  • Product or component type: Variable speed drive
  • Connector type: 1 RJ45 Modbus on front face
  • Electromagnetic emission: Radiated emissions environment 1 category C2 EN/IEC 61800-3 2...16 kHz shielded motor cable, Conducted emissions EN/IEC 61800-3
  • Product destination: Asynchronous motors
  • Physical interface: 2-wire RS 485 Modbus
  • Product certifications: GOST, C-Tick, CSA, UL, NOM
  • Product specific application: Simple machine
  • Transmission frame: RTU Modbus
  • Assembly style: With heat sink
  • Transmission rate: 4800 bit/s, 9600 bit/s, 19200 bit/s, 38400 bit/s
  • Component name: ATV12
  • Number of addresses: 1...247 Modbus
  • Quantity per set: Set of 1
  • Communication service: Read holding registers (03) 29 words, Write single register (06) 29 words, Write multiple registers (16) 27 words, Read/write multiple registers (23) 4/4 words, Read device identification (43)
  • Ambient air temperature for storage: -13...158 F (-25...70 C)
  • EMC filter: Without EMC filter
  • prospective line Isc: <= 5 kA
  • Ambient air temperature for operation: 14...122 F (-10...50 C) protective cover from the top of the drive removed, 122...140 F (50...60 C) with current derating 2.2 % per C
  • Built-in fan: With
  • Continuous output current: 16.7 A 4 kHz
  • Phase: 3 phases
  • Maximum transient current: 25 A 60 s
  • Speed drive output frequency: 0.5...400 Hz
  • Nominal switching frequency: 4 kHz
  • Motor power hp: 5 hp
  • Communication port protocol: Modbus
  • Braking torque: Up to 70 % of nominal motor torque without braking resistor
  • Line current: 23.8 A 200 V, 19.9 A 240 V
  • Motor slip compensation: Adjustable, Preset in factory
  • Speed range: 1...20
  • Output voltage: 200...240 V 3 phases
  • Transient overtorque: 150...170 % of nominal motor torque depending on drive rating and type of motor
  • Asynchronous motor control profile: Sensorless flux vector control, Quadratic voltage/frequency ratio, Voltage/frequency ratio (V/f)
  • Insulation: Electrical between power and control
  • Noise level: 50 dB
  • Supply: Internal supply for reference potentiometer 5 V DC 4.75...5.25 V 10 mA overload and short-circuit protection, Internal supply for logic inputs 24 V DC 20.4...28.8 V 100 mA overload and short-circuit protection
  • Analogue input number: 1
  • Analogue input type: Configurable voltage AI1 0...10 V 30 kOhm, Configurable voltage AI1 0...5 V 30 kOhm, Configurable current AI1 0...20 mA 250 Ohm
  • Discrete input number: 4
  • Discrete input type: Programmable LI1...LI4 24 V 18...30 V
  • Discrete input logic: Negative logic (sink) > 16 V < 10 V 3.5 kOhm, Positive logic (source) 0...< 5 V > 11 V
  • Sampling duration: 20 ms +/- 1 ms logic input, 10 ms analogue input
  • Linearity error: +/- 0.3 % of maximum value analogue input
  • Analogue output number: 1
  • Analogue output type: Software-configurable voltage AO1 0...10 V 470 Ohm 8 bits, Software-configurable current AO1 0...20 mA 800 Ohm 8 bits
  • Discrete output number: 2
  • Discrete output type: Logic output LO+, LO-, Protected relay output R1A, R1B, R1C 1 C/O
  • Minimum switching current: 5 mA 24 V DC logic relay
  • Maximum switching current: 2 A 250 V AC inductive cos phi = 0.4 L/R = 7 ms logic relay, 2 A 30 V DC inductive cos phi = 0.4 L/R = 7 ms logic relay, 3 A 250 V AC resistive cos phi = 1 L/R = 0 ms logic relay, 4 A 30 V DC resistive cos phi = 1 L/R = 0 ms logic relay
  • Acceleration and deceleration ramps: Linear from 0 to 999.9 s, U, S
  • Braking to standstill: By DC injection <= 30 s
  • Frequency resolution: 0.1 Hz display unit, Converter A/D, 10 bits analog input
  • Time constant: 20 ms +/- 1 ms for reference change
  • Marking: CE
  • Operating position: Vertical +/- 10 degree
  • Specific application: Commercial equipment
  • Discrete and process manufacturing: Commercial equipment : mixer, Commercial equipment : other application, Textile : ironing
  • Power range: 4...6 kW at 200...240 V 3 phases
  • Motor starter type: Variable speed drive
Santa Clara Systems specializes in hard-to-find parts. Choose from our overstock inventory and save on ATV12HU40M3 . Santa Clara Systems carries 10,295 items from Telemecanique.
  • Variable Speed Drive Atv12 - 4kw - 5hp - 200..240v - 3ph - With Heat Sink

Alternates

    Common Typos

    • ATV12HU4OM3
    • ATV1ZHU40M3
    • ATV1ZHU4OM3
    • ATVI2HU40M3
    • ATVI2HU4OM3
    • ATVIZHU40M3
    • ATVIZHU4OM3
    • ATVL2HU40M3
    • ATVL2HU4OM3
    • ATVLZHU40M3
    • ATVLZHU4OM3

    Appended Numbers

    • ATV12HU40M3-A
    • ATV12HU40M3-B
    • ATV12HU40M3-C
    • ATV12HU40M3-D
    • ATV12HU40M3-E
    • ATV12HU40M3-F
    • ATV12HU40M3-G
    • ATV12HU40M3-H
    • ATV12HU40M3-I
    • ATV12HU40M3-J
    • ATV12HU40M3-K
    • ATV12HU40M3-L
    • ATV12HU40M3-M
    • ATV12HU40M3-N
    • ATV12HU40M3-O
    • ATV12HU40M3-P
    • ATV12HU40M3-Q
    • ATV12HU40M3-R
    • ATV12HU40M3-S
    • ATV12HU40M3-T
    • ATV12HU40M3-U
    • ATV12HU40M3-V
    • ATV12HU40M3-W
    • ATV12HU40M3-X
    • ATV12HU40M3-Y
    • ATV12HU40M3-Z

    More Products Like This

    Customers Are Also Buying

    We Deliver!

    Late West Coast Shipping Hours
    Late West Coast Shipping (5PM PST)
    Drop-Ship and Blind-Ship Specialists
    Expertly Packed Static-Limited
    Same-Day Service
    In-House Courier
    visa credit card logo mastercard credit card logo discover credit card logo american express credit card logo

    Customers we work with

    3M logo
    Kaiser Permanente logo
    Safeway Logo
    Georgia-Pacific logo
    Coca Cola logo
    duke energy logo
    BART logo
    Pepsi logo
    LA DWP logo
    US Navy logo
    Dean Foods logo
    ConAgra Brands logo