Out of Stock

PI2099

Efector - Pressure Sensor | PI-1-1BRES30-MFRKG/US/ /P

Current response time:

9 Minutes 11 Seconds

Description: Pressure Sensor | PI-1-1BRES30-MFRKG/US/ /P
Electrical Design: Pnp/Npn
Output Function: Normally Open / Closed; (Configurable)
Material: Stainless Steel (1.4404 / 316L); Pc; Pbt; Pei; Fkm; Ptfe
Installation: Freely Rotatable Housing 350°
Media: Viscous Media And Liquids With Suspended Particles; Liquids And Gases
Medium Temperature [°C]: -25...125; (145 Max. 1H)
Pressure Rating [Mbar]: 10000
Min. Bursting Pressure [Mbar]: 30000
Type Of Pressure: Relative Pressure
No Dead Space: Yes
Operating Voltage [V]: 18...32 Dc
Current Consumption [Ma]: < 50
Min. Insulation Resistance [M?]: 100; (500 V Dc)
Protection Class: Iii
Reverse Polarity Protection: Yes
Power-On Delay Time [S]: 0.5
Integrated Watchdog: Yes
Number Of Inputs And Outputs: Number Of Digital Outputs: 1; Number Of Analog Outputs: 1
Total Number Of Outputs: 2
Output Signal: Switching Signal; Analog Signal; (Configurable)
Number Of Digital Outputs: 1
Max. Voltage Drop Switching Output Dc [V]: 2
Permanent Current Rating Of Switching Output Dc [Ma]: 250
Switching Frequency Dc [Hz]: 6
Number Of Analog Outputs: 1
Analog Current Output [Ma]: 4...20, Invertible; (Scalable 1:4)
Max. Load [?]: (Ub - 10 V) / 20 Ma
Analog Voltage Output [V]: 0...10, Invertible; (Scalable 1:4)
Min. Load Resistance [?]: 2000
Short-Circuit Protection: Yes
Type Of Short-Circuit Protection: Yes (Non-Latching)
Overload Protection: Yes

Measuring Range [Mbar]: -1000...1000
Set Point Sp [Mbar]: -998...1000
Reset Point Rp [Mbar]: -1000...998
Analog Start Point [Mbar]: -1000...500
Analog End Point [Mbar]: -500...1000
In Steps Of [Mbar]: 1
Factory Setting: Sp1 = -500 Mbar Rp1 = -540 Mbar Asp = -1000 Mbar Aep = 1000 Mbar
Switch Point Accuracy [% Of The Span]: < ± 0,2; (Turn Down 1:1)
Repeatability [% Of The Span]: < ± 0,1; (With Temperature Fluctuations < 10 K; Turn Down 1:1)
Characteristics Deviation [% Of The Span]: < ± 0,2; (Turn Down 1:1 Linearity, Incl. Hysteresis And Repeatability Limit Value Setting To Din 16086)
Linearity Deviation [% Of The Span]: < ± 0,15; (Turn Down 1:1)
Hysteresis Deviation [% Of The Span]: < ± 0,15; (Turn Down 1:1)
Long-Term Stability [% Of The Span]: < ± 0,1; (Turn Down 1:1; Per Year)
Temperature Coefficient Zero Point [% Of The Span / 10 K]: < ± 0,05; (0...70 °C)
Temperature Coefficient Span [% Of The Span / 10 K]: < ± 0,15; (0...70 °C)
Response Time [Ms]: < 100
Damping For The Switching Output Dap [S]: 0.1...100
Damping For The Analog Output Daa [S]: 0.1...100
Step Response Time Analogue Output [Ms]: 25
Parameter Setting Options: Hysteresis / Window; Normally Open / Closed; Switching Logic; Current/Voltage Output; Damping; Adaptation Of Displayed Values; Display Can Be Rotated And Switched Off; Display Unit; Zero Point; Span
Ambient Temperature [°C]: -25...80
Storage Temperature [°C]: -40...100
Protection: Ip 67; Ip 69K
Emc: En 61000-4-2 Esd 4 Kv Cd / 8 Kv Ad En 61000-4-3 Hf Radiated 10 V/M En 61000-4-4 Burst 2 Kv En 61000-4-5 Surge 0,5/1 Kv En 61000-4-6 Hf Conducted 10 V
Shock Resistance: Din Iec 68-2-27 50 G (11 Ms)
Vibration Resistance: Din Iec 68-2-6 20 G (10...2000 Hz)
Materials (Wetted Parts): Ceramics (99.9 % Al2O3); Ptfe; Stainless Steel (1.4435 / 316L); Surface Characteristics: Ra < 0,4 / Rz 4
Min. Pressure Cycles: 100 Million
Process Connection: Threaded Connection Aseptoflex External Thread Aseptoflex
Display: Display Unit 6 X, Green Switching Status Led, Yellow Function Display Alphanumeric Display, 4-Digit Measured Values Alphanumeric Display, 4-Digit
Display Unit: Mbar; Kpa; Psi; Inh2O; Mws; % Of The Span
Connection: Connector: 1 X M12; Contacts: Gold-Plated
Alternate Manufacturer Name: IFM

Santa Clara Systems specializes in hard-to-find parts. Choose from our overstock inventory and save on PI2099 . Santa Clara Systems carries 2,295 items from Efector.

We are in the process of adding data and downloadable material for this item. Please search similar items for more information related to this product.