• Telemecanique ATV 320D15M3C Variable Speed Drive Product Image
  • Telemecanique ATV 320D15M3C Variable Speed Drive Product Image
  • Telemecanique ATV 320D15M3C Variable Speed Drive Product Image
  • Telemecanique ATV 320D15M3C Variable Speed Drive Product Image
  • Telemecanique ATV 320D15M3C Barcode

ATV320D15M3C

Get a Quote

Current response time:

16 Minutes 46 Seconds
  • Description: Variable Speed Drive
  • Range of product: Altivar Machine ATV320
  • IP degree of protection: IP20 conforming to IEC 61800-5-1
  • Standards: EN/IEC 61800-3
  • Device short name: ATV320
  • Width: 180.0 mm
  • Height: 330.0 mm
  • Depth: 198.0 mm
  • Operating altitude: <= 1000 m without
  • Vibration resistance: 1 gn (f= 13200 Hz) conforming to EN/IEC 60068-2-6
  • Shock resistance: 15 gn for 11 ms conforming to EN/IEC 60068-2-27
  • Electrical connection: Screw terminal, clamping capacity: 0.5...1.5 mm, AWG 20...AWG 16 (control)
  • Insulation resistance: > 1 MOhm 500 V DC for 1 minute to earth
  • motor power kW: 15.0 kW for heavy duty
  • [Us] rated supply voltage: 200...240 V - 15...10 %
  • Relative humidity: 595 % without condensation conforming to IEC 60068-2-3
  • Protection type: Input phase breaks: drive
  • Switching frequency: 2...16 kHz adjustable
  • Degree of protection: UL type 1 (with conformity kit)
  • Product or component type: Variable speed drive
  • Product specific application: Complex machines
  • Product destination: Synchronous motors
  • Format of the control block: Compact
  • EMC filter: Without EMC filter
  • Type of cooling: Fan
  • Network number of phases: 3 phases
  • Supply frequency: 50...60 Hz - 5...5 %
  • Motor power hp: 20.0 hp for heavy duty
  • Line current: 79.6 A at 200 V (heavy duty)
  • prospective line Isc: 22 kA
  • Apparent power: 27.9 kVA at 240 V (heavy duty)
  • Continuous output current: 66.0 A at 4 kHz for heavy duty
  • Maximum transient current: 99.0 A during 60 s (heavy duty)
  • Power range: 15...20 kW at 200240 V, 3 phases (based on load duty)
  • Asynchronous motor control profile: Voltage/frequency ratio, 5 points
  • Synchronous motor control profile: Vector control without sensor
  • Speed drive output frequency: 0.1599 Hz
  • Nominal switching frequency: 4 kHz
  • Safety function: STO (safe torque off) SIL 3
  • Communication port protocol: Modbus serial
  • Optional communication modules: Communication module, CANopen daisy chain RJ45
  • Variant: Standard version
  • Output voltage: <= power supply voltage
  • Permissible temporary current boost: 1.5 x In during 60 s (heavy duty)
  • Speed range: 1100 for asynchronous motor in open-loop mode
  • Transient overtorque: 170200 % of nominal motor torque
  • Braking torque: <= 170 % during 60 s with braking resistor
  • Regulation loop: Adjustable PID regulator
  • Motor slip compensation: Automatic whatever the load
  • Acceleration and deceleration ramps: Linear
  • Braking to standstill: By DC injection
  • Frequency resolution: Display unit: 0.1 Hz
  • Connector type: 1 RJ45 (on terminal) for Modbus/CANopen
  • Physical interface: 2-wire RS 485 for Modbus serial/CANopen
  • Transmission frame: RTU for Modbus serial
  • Transmission rate: 4.8, 9.6, 19.2, 38.4 kbit/s for Modbus serial
  • Data format: 8 bits, configurable odd, even or no parity for Modbus serial
  • Type of polarization: No impedance for Modbus serial
  • Number of addresses: 1127 for CANopen
  • Method of access: Slave CANopen
  • Supply: Internal supply for reference potentiometer (1 to 10 kOhm): 10.5 V DC +/- 5 %, <10 mA, protection type: overload and short-circuit protection
  • Local signalling: 1 LED (green)CANopen run:
  • Net weight: 6.9 kg
  • Analogue input number: 3
  • Analogue input type: AI1 voltage: 0...10 V DC, impedance: 30000 Ohm, resolution 10 bits
  • Discrete input number: 7
  • Discrete input type: Programmable (sink/source) (DI1...DI4)24...30 V DC, with level 1 PLC
  • Discrete input logic: Negative logic (sink) (DI1...DI6), > 19 V (state 0), < 13 V (state 1)
  • Analogue output number: 1
  • Analogue output type: AQ1 software-configurable current: 0...20 mA, impedance: 800 Ohm, resolution 10 bits
  • Sampling duration: 2 ms (AI1, AI2, AI3) - analog input
  • Linearity error: AI1, AI2, AI3: +/- 0.2...0.5 % of maximum value for analog input
  • Discrete output number: 3
  • Discrete output type: Configurable relay logic: (R1A, R1B, R1C) NO/NC - 100000 cycles
  • Refresh time: Logic input (DI1...DI6): 8 ms (+/- 0.7 ms)
  • Minimum switching current: Relay output R1, R2: 5 mA at 24 V DC
  • Maximum switching current: Relay output R1 on resistive load, cos phi = 1: 3 A at 250 V AC
  • Specific application: Machinery
  • Variable speed drive application selection: Hoisting Self erecting
  • Motor power range: 1520 kW at 200240 V 3 phases
  • Motor starter type: Variable speed drive
  • Isolation: Between power and control terminals
  • Noise level: 58 dB conforming to 86/188/EEC
  • power dissipation in W: Fan: 545.4 W at 200 V, switching frequency 4 kHz
  • Volume of cooling air: 156.0 m3/h
  • Operating position: Vertical +/- 10 degree
  • Electromagnetic compatibility: 1.2/50 s - 8/20 s surge immunity test level 3 conforming to IEC 61000-4-5
  • Pollution degree: 2 conforming to EN/IEC 61800-5-1
  • Ambient air temperature for operation: -1050 C without
  • Ambient air temperature for storage: -2570 C
  • Environmental characteristic: Chemical pollution resistance class 3C3 conforming to EN/IEC 60721-3-3
  • Product certifications: CE
  • Marking: CE
  • Sustainable offer status: Green Premium product
  • REACh free of SVHC: Yes
  • EU RoHS Directive: Pro-active compliance (Product out of EU RoHS legal scope)
  • Mercury free: Yes
  • RoHS exemption information: Yes
  • Environmental Disclosure: Product Environmental Profile
  • Circularity Profile: End of Life Information
Santa Clara Systems specializes in hard-to-find parts. Choose from our overstock inventory and save on ATV320D15M3C . Santa Clara Systems carries 10,295 items from Telemecanique.
We are in the process of adding data and downloadable material for this item. Please search similar items for more information related to this product.

Alternates

    Common Typos

    • ATV320D1SM3C
    • ATV320DI5M3C
    • ATV320DISM3C
    • ATV320DL5M3C
    • ATV320DLSM3C
    • ATV32OD15M3C
    • ATV32OD1SM3C
    • ATV32ODI5M3C
    • ATV32ODISM3C
    • ATV32ODL5M3C
    • ATV32ODLSM3C
    • ATV3Z0D15M3C
    • ATV3Z0D1SM3C
    • ATV3Z0DI5M3C
    • ATV3Z0DISM3C
    • ATV3Z0DL5M3C
    • ATV3Z0DLSM3C
    • ATV3ZOD15M3C
    • ATV3ZOD1SM3C
    • ATV3ZODI5M3C
    • ATV3ZODISM3C
    • ATV3ZODL5M3C
    • ATV3ZODLSM3C

    Appended Numbers

    • ATV320D15M3C-A
    • ATV320D15M3C-B
    • ATV320D15M3C-C
    • ATV320D15M3C-D
    • ATV320D15M3C-E
    • ATV320D15M3C-F
    • ATV320D15M3C-G
    • ATV320D15M3C-H
    • ATV320D15M3C-I
    • ATV320D15M3C-J
    • ATV320D15M3C-K
    • ATV320D15M3C-L
    • ATV320D15M3C-M
    • ATV320D15M3C-N
    • ATV320D15M3C-O
    • ATV320D15M3C-P
    • ATV320D15M3C-Q
    • ATV320D15M3C-R
    • ATV320D15M3C-S
    • ATV320D15M3C-T
    • ATV320D15M3C-U
    • ATV320D15M3C-V
    • ATV320D15M3C-W
    • ATV320D15M3C-X
    • ATV320D15M3C-Y
    • ATV320D15M3C-Z

    Customers Are Also Buying

    We Deliver!

    Late West Coast Shipping Hours
    Late West Coast Shipping (5PM PST)
    Drop-Ship and Blind-Ship Specialists
    Expertly Packed Static-Limited
    Same-Day Service
    In-House Courier
    visa credit card logo mastercard credit card logo discover credit card logo american express credit card logo

    Customers we work with

    3M logo
    Kaiser Permanente logo
    Safeway Logo
    Georgia-Pacific logo
    Coca Cola logo
    duke energy logo
    BART logo
    Pepsi logo
    LA DWP logo
    US Navy logo
    Dean Foods logo
    ConAgra Brands logo