ATV340D15N4E

Telemecanique - Variable Speed Drive

Current response time:

By 5AM PT on Thursday

Emergency?

*Santa Clara Systems is not a Telemecanique Authorized Distributor.

Description: Variable Speed Drive
Range of product: Altivar Machine ATV340
IP degree of protection: IP20 conforming to IEC 61800-5-1
Standards: EN/IEC 61800-3
Device short name: ATV340
Width: 180 mm
Height: 385 mm
Depth: 249 mm
Operating altitude: <= 1000 m without
Vibration resistance: 1.5 mm peak to peak (f= 2…19 Hz) conforming to EN/IEC 60721-3-3 class 3M3
Shock resistance: 15 gn for 11 ms, class 3M3 conforming to EN/IEC 60721-3-3
Electrical connection: Control: screw terminal0.2...2.5 mm²/AWG 24...AWG 12
Insulation resistance: > 1 MOhm 500 V DC for 1 minute to earth
motor power kW: 18.5 kW for normal duty
[Us] rated supply voltage: 380...480 V - 15...10 %
Relative humidity: 5…95 % without condensation conforming to EN/IEC 60721-3-3 class 3K3
Protection type: Thermal protection: motor
Switching frequency: 2...16 kHz adjustable
Product or component type: Variable speed drive
Device application: Machine
Variant: Standard version
Mounting mode: Cabinet mount
EMC filter: Integrated with 20 m conforming to EN/IEC 61800-3 category C3
Type of cooling: Forced convection
Supply frequency: 50...60 Hz +/- 5 %
Network number of phases: 3 phases
Motor power hp: 25 hp for normal duty
Line current: 44.9 A at 380 V without line choke (heavy duty)
prospective line Isc: 22 kA
Apparent power: 28.3 kVA at 480 V (normal duty)
Continuous output current: 39 A at 4 kHz for normal duty
Maximum transient current: 42.9 A during 60 s (normal duty)
Asynchronous motor control profile: Optimized torque mode
Synchronous motor control profile: Reluctance motor
Speed drive output frequency: 0.1…599 Hz
Nominal switching frequency: 4 kHz
Safety function: STO (safe torque off) SIL 3
Number of preset speeds: 16 preset speeds
Communication port protocol: Modbus serial
Option card: Slot GP-X: digital and analog I/O extension module
Output voltage: <= power supply voltage
Permissible temporary current boost: 1.1 x In during 60 s (normal duty)
Motor slip compensation: Automatic whatever the load
Acceleration and deceleration ramps: Linear adjustable separately from 0.01...9999 s
Braking to standstill: By DC injection
Frequency resolution: Display unit: 0.1 Hz
Connector type: connector(s)1 x RJ45, Modbus serial on front face

Physical interface: 2-wire RS 485 for Modbus serial
Transmission frame: RTU for Modbus serial
Transmission rate: 4800 bps, 9600 bps, 19200 bps, 38.4 Kbps for Modbus serial
Exchange mode: Half duplex, full duplex, autonegotiation Ethernet IP/Modbus TCP
Data format: 8 bits, configurable odd, even or no parity for Modbus serial
Type of polarization: No impedance for Modbus serial
Number of addresses: 1…247 for Modbus serial
Method of access: Slave Modbus RTU
Supply: External supply for digital inputs: 24 V DC (19…30 V), <1.25 mA, protection type: overload and short-circuit protection
Local signalling: Local diagnostic: 4 LED (mono/dual colour)
Net weight: 9.5 kg
Analogue input number: 2
Analogue input type: AI1 software-configurable current: 0...20 mA, impedance: 250 Ohm, resolution 12 bits
Discrete input number: 8
Discrete input type: PTI programmable as pulse input: 0…30 kHz, 24 V DC (<= 30 V)
Input compatibility: DI1...DI5: discrete input level 1 PLC conforming to EN/IEC 61131-2
Discrete input logic: Positive logic (source) (DI1...DI5), < 5 V (state 0), > 11 V (state 1)
Analogue output number: 1
Analogue output type: Software-configurable voltage AQ1: 0...10 V DC impedance 470 Ohm, resolution 10 bits
Input/output type: Programmable as logic input/output DQ1: 0…1 kHz, <= 30 V DC, 100 mA
Sampling duration: 2 ms +/- 0.5 ms (DI1...DI5) - discrete input
Linearity error: AI1, AI2: +/- 0.15 % of maximum value for analog input
Relay output number: 2
Relay output type: Configurable relay logic R1: fault relay NO/NC electrical durability 100000 cycles
Refresh time: Relay output (R1, R2): 5 ms (+/- 0.5 ms)
Minimum switching current: Relay output R1, R2: 5 mA at 24 V DC
Maximum switching current: Relay output R1 on resistive load, cos phi = 1: 3 A at 250 V AC
Isolation: Between power and control terminals
Noise level: 55.6 dB conforming to 86/188/EEC
power dissipation in W: Natural convection: 18 W at 380 V, switching frequency 4 kHz (heavy duty)
Volume of cooling air: 128 m3/h
Operating position: Vertical +/- 10 degree
Electromagnetic compatibility: Electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2
Pollution degree: 2 conforming to EN/IEC 61800-5-1
Ambient air temperature for operation: -15…50 °C without current derating (heavy duty)
Ambient air temperature for storage: -40…70 °C
Environmental characteristic: Chemical pollution resistance class 3C3 conforming to EN/IEC 60721-3-3
Product certifications: TÜV
Marking: CE
Sustainable offer status: Green Premium product
REACh Regulation: REACh Declaration
Mercury free: Yes
China RoHS Regulation: China RoHS declaration
Environmental Disclosure: Product Environmental Profile
Circularity Profile: End of Life Information
WEEE: The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins

Santa Clara Systems specializes in hard-to-find parts. Choose from our overstock inventory and save on ATV340D15N4E . Santa Clara Systems carries 10,632 items from Telemecanique.

We are in the process of adding data and downloadable material for this item. Please search similar items for more information related to this product.