Out of Stock

Telemecanique ATV61HU55N4 ATV61 5,5 kW 7,5HP 480V 3 phases EMC IP20 with graph term Product Image

ATV61HU55N4

Telemecanique - ATV61 5,5 kW 7,5HP 480V 3 phases EMC IP20 with graph term

Current response time:

By 5AM PT on Wednesday

Emergency?

*Santa Clara Systems is not a Telemecanique Authorized Distributor.

Description: ATV61 5,5 kW 7,5HP 480V 3 phases EMC IP20 with graph term
Product weight: 8.82 lb(US) (4 kg)
Range of product: Altivar 61
IP degree of protection: IP20 on upper part without blanking plate on cover conforming to EN/IEC 60529IP20 on upper part without blanking plate on cover conforming to EN/IEC 61800-5-1IP21 conforming to EN/IEC 60529IP21 conforming to EN/IEC 61800-5-1IP41 on upper part conforming to EN/IEC 60529IP41 on upper part conforming to EN/IEC 61800-5-1IP54 on lower part conforming to EN/IEC 60529IP54 on lower part conforming to EN/IEC 61800-5-1
Standards: UL Type 1EN 61800-3 environments 1 category C2IEC 60721-3-3 class 3S2IEC 60721-3-3 class 3C1EN/IEC 61800-3EN/IEC 61800-5-1EN 55011 class A group 1EN 61800-3 environments 2 category C2
Width: 6.1 in (155 mm)
Height: 10.24 in (260 mm)
Depth: 7.36 in (187 mm)
Operating altitude: <= 3280.84 ft. (1000 m) without derating3280.84...9842.52 ft. (1000...3000 m) with current derating 1 % per 100 m
Tightening torque: AI1-/AI1+, AI2, AO1, R1A, R1B, R1C, R2A, R2B, LI1...LI6, PWR 5.31 lbf.in (0.6 N.m)L1/R, L2/S, L3/T, U/T1, V/T2, W/T3, PC/-, PO, PA/+, PA, PB 12.39 lbf.in (1.4 N.m) / 12.3 lb.in
Vibration resistance: 1.5 mm peak to peak (f = 3...13 Hz) conforming to EN/IEC 60068-2-61 gn (f = 13...200 Hz) conforming to EN/IEC 60068-2-6
Shock resistance: 15 gn 11 ms conforming to EN/IEC 60068-2-27
Electrical connection: AI1-/AI1+, AI2, AO1, R1A, R1B, R1C, R2A, R2B, LI1...LI6, PWR terminal 2.5 mm² / AWG 14L1/R, L2/S, L3/T, U/T1, V/T2, W/T3, PC/-, PO, PA/+, PA, PB terminal 6 mm² / AWG 8
Insulation resistance: > 1 mOhm at 500 V DC for 1 minute to earth
motor power kW: 3 kW 3 phasesat 380...480 V
[Us] rated supply voltage: 380...480 V (- 15...10 %)
Relative humidity: 5...95 % without condensation conforming to IEC 60068-2-35...95 % without dripping water conforming to IEC 60068-2-3
Protection type: Drive against exceeding limit speedDrive against input phase lossDrive break on the control circuitDrive input phase breaksDrive line supply overvoltageDrive line supply undervoltageDrive overcurrent between output phases and earthDrive overheating protectionDrive overvoltages on the DC busDrive power removalDrive short-circuit between motor phasesDrive thermal protectionMotor motor phase breakMotor power removalMotor thermal protection
Response time: <= 100 ms in STO (Safe Torque Off)R1A, R1B, R1C <= 7 ms, tolerance +/- 0.5 msR2A, R2B <= 7 ms, tolerance +/- 0.5 ms
Switching frequency: 1...16 kHz adjustable12...16 kHz with derating factor
Product destination: Asynchronous motorsSynchronous motors
Noise level: 54.5 dB conforming to 86/188/EEC
Product or component type: Variable speed drive
Supply voltage limits: 323...528 V
Dielectric strength: 3535 V DC between earth and power terminals5092 V DC between control and power terminals
Product specific application: Pumping and ventilation machine
Supply frequency: 50...60 Hz (- 5...5 %)
Electromagnetic compatibility: Conforming to IEC 61000-4-2 level 3Conforming to IEC 61000-4-11Conforming to IEC 61000-4-6 level 3Conforming to IEC 61000-4-3 level 3Conforming to IEC 61000-4-4 level 4
Component name: ATV61
Network frequency: 47.5...63 Hz
Continuous output current: 6.2 A at 12 kHz, 460 V 3 phases7.8 A at 12 kHz, 380 V 3 phases
Product certifications: ULNOM 117CSAC-TickDNVGOST
Output frequency: 0.1...599 Hz
Pollution degree: 2 conforming to EN/IEC 61800-5-1
Phase: 3 phases
Speed range: 1...100 in open-loop mode, without speed feedback
Line current: 9 Afor 480 V 3 phases 3 kW10.7 Afor 380 V 3 phases 3 kW
Speed accuracy: +/- 10 % of nominal slip 0.2 Tn to Tn torque variation without speed feedback
EMC filter: Class C2 EMC filter integrated
Torque accuracy: +/- 15 % in open-loop mode, without speed feedback
Assembly style: With heat sink
Transient overtorque: 130 % of nominal motor torque, +/- 10 %for 60 s
Apparent power: 7 kVAfor 380 V 3 phases 3 kW
Braking torque: 30 % without braking resistor<= 125 % with braking resistor

Ambient air temperature for operation: 14...122 °F (-10...50 °C) without derating122...140 °F (50...60 °C) with derating factor
prospective line Isc: 5 kA 3 phases
Regulation loop: Frequency PI regulator
Ambient air temperature for storage: -13...158 °F (-25...70 °C)
Maximum transient current: 9.3 Afor 60 s 3 phases
Motor slip compensation: Can be suppressedNot available in voltage/frequency ratio (2 or 5 points)AdjustableAutomatic whatever the load
Nominal switching frequency: 12 kHz
Local signaling: 1 LED red presence of drive voltage
Output voltage: <= power supply voltage
Asynchronous motor control profile: Voltage/frequency ratio - Energy Saving, quadratic U/fVoltage/frequency ratio, 5 pointsVoltage/frequency ratio, 2 pointsFlux vector control without sensor, standard
Isolation: Between power and control terminals
Synchronous motor control profile: Vector control without sensor, standard
Type of cable: With an IP21 or an IP31 kit: 3-strand IEC cableat 104 °F (40 °C), copper 70 °C PVCWithout mounting kit: 1-strand IEC cableat 113 °F (45 °C), copper 70 °C PVCWithout mounting kit: 1-strand IEC cableat 113 °F (45 °C), copper 90 °C XLPE/EPRWith UL Type 1 kit: 3-strand UL 508 cableat 104 °F (40 °C), copper 75 °C PVC
Communication port protocol: CANopenModbus
Type of polarization: No impedance Modbus
Option card: APOGEE FLN communication cardBACnet communication cardCC-Link communication cardController inside programmable cardDeviceNet communication cardEthernet/IP communication cardFipio communication cardI/O extension cardInterbus-S communication cardLonWorks communication cardMETASYS N2 communication cardModbus Plus communication cardModbus TCP communication cardModbus/Uni-Telway communication cardMulti-pump cardProfibus DP communication cardProfibus DP V1 communication card
Supply: Internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 %, <= 10 mA for overload and short-circuit protectionInternal supply 24 V DC (21...27 V), <= 200 mA for overload and short-circuit protectionExternal supply 24 V DC (19...30 V)
Analogue input number: 2
Analogue input type: AI1-/Al1+ bipolar differential voltage +/- 10 V DC, input voltage 24 V max, resolution 11 bits + signAI2 software-configurable current 0...20 mA, impedance 242 Ohm, resolution 11 bitsAI2 software-configurable voltage 0...10 V DC, input voltage 24 V max, impedance 30000 Ohm, resolution 11 bits
Sampling duration: Discrete input LI6 (if configured as logic input) 2 ms, +/- 0.5 msAnalog input AI1-/Al1+ 2 ms, +/- 0.5 msAnalog input Al2 2 ms, +/- 0.5 msAnalog output AO1 2 ms, +/- 0.5 msDiscrete input LI1...LI5 2 ms, +/- 0.5 ms
Accuracy: AI1-/Al1+ +/- 0.6 % for a temperature variation 60 °CAI2 +/- 0.6 % for a temperature variation 60 °CAO1 +/- 1 % for a temperature variation 60 °C
Linearity error: AI1-/Al1+ +/- 0.15 % of maximum valueAI2 +/- 0.15 % of maximum valueAO1 +/- 0.2 %
Analogue output number: 1
Analogue output type: AO1 software-configurable current, analogue output range 0...20 mA, impedance 500 Ohm, resolution 10 bitsAO1 software-configurable logic output 10 V, <= 20 mAAO1 software-configurable voltage, analogue output range 0...10 V DC, impedance 470 Ohm, resolution 10 bits
Discrete output number: 2
Discrete output type: (R1A, R1B, R1C) configurable relay logic NO/NC, electrical durability 100000 cycles(R2A, R2B) configurable relay logic NO, electrical durability 100000 cycles
Minimum switching current: Configurable relay logic 3 mAat 24 V DC
Maximum switching current: R1, R2 on resistive load, 5 A at 30 V DC, cos phi = 1, 0 msR1, R2 on inductive load, 2 A at 30 V DC, cos phi = 0.4, 7 msR1, R2 on resistive load, 5 A at 250 V AC, cos phi = 1, 0 msR1, R2 on inductive load, 2 A at 250 V AC, cos phi = 0.4, 7 ms
Discrete input number: 7
Discrete input type: (LI1...LI5) programmable, 24 V DC, voltage limits <= 30 V, with level 1 PLC, impedance 3500 Ohm(LI6) switch-configurable, 24 V DC, voltage limits <= 30 V, with level 1 PLC, impedance 3500 Ohm(LI6) switch-configurable PTC probe, 0...6, impedance 1500 Ohm(PWR) safety input, 24 V DC, voltage limits <= 30 V, impedance 1500 Ohm
Discrete input logic: LI1...LI5 positive logic (source), < 5 V (state 0), > 11 V (state 1)LI1...LI5 negative logic (sink), > 16 V (state 0), < 10 V (state 1)LI6 (if configured as logic input) negative logic (sink), > 16 V (state 0), < 10 V (state 1)LI6 (if configured as logic input) positive logic (source), < 5 V (state 0), > 11 V (state 1)
Acceleration and deceleration ramps: Automatic adaptation of ramp if braking capacity exceeded, by using resistorLinear adjustable separately from 0.01 to 9000 sS, U or customized
Braking to standstill: By DC injection
Frequency resolution: Analog input 0.024/50 HzDisplay unit 0.1 Hz
Connector type: 1 RJ45 Modbus on front face1 RJ45 Modbus on terminalMale SUB-D 9 on RJ45 CANopen
Physical interface: 2-wire RS 485 Modbus
Transmission frame: RTU Modbus
Transmission rate: 20 kbps, 50 kbps, 125 kbps, 250 kbps, 500 kbps, 1 Mbps CANopen4800 bps, 9600 bps, 19200 bps, 38.4 Kbps Modbus on terminal9600 bps, 19200 bps Modbus on front face
Data format: 8 bits, 1 stop, even parity Modbus on front face8 bits, odd even or no configurable parity Modbus on terminal
Number of addresses: 1...247 Modbus1...127 CANopen
Method of access: Slave CANopen
Marking: CE
Operating position: Vertical +/- 10 degree

Santa Clara Systems specializes in hard-to-find parts. Choose from our overstock inventory and save on ATV61HU55N4 . Santa Clara Systems carries 10,431 items from Telemecanique.