RM35TF30

Telemecanique - multifunction phase control relay RM35-T - range 194..528 V AC

Current response time:

By 5AM PT on Thursday

Emergency?

*Santa Clara Systems is not a Telemecanique Authorized Distributor.

Description: multifunction phase control relay RM35-T - range 194..528 V AC
Product weight: 0.29 lb(US) (0.13 kg)
Range of product: Zelio Control
IP degree of protection: IP20(terminals) conforming to IEC 60529IP30 (casing) conforming to IEC 60529
Standards: EN/IEC 60255-1
Width: 1.38 in (35 mm)
[Ui] rated insulation voltage: 400 V conforming to IEC 60664-1
Mechanical durability: <= 30000000 cycles
Tightening torque: 5.31...8.85 lbf.in (0.6...1 N.m) conforming to IEC 60947-1
Connections - terminals: Screw terminals 1 x 0.5...1 x 4 mm² - AWG 20...AWG 11, solid cable without cable endScrew terminals 2 x 0.5...2 x 2.5 mm² - AWG 20...AWG 14, solid cable without cable endScrew terminals 1 x 0.2...1 x 2.5 mm² - AWG 24...AWG 12, flexible cable with cable endScrew terminals 2 x 0.2...2 x 1.5 mm² - AWG 24...AWG 16, flexible cable with cable end
Mounting support: 35 mm symmetrical DIN rail conforming to EN/IEC 60715
Operating rate: <= 360 operations/hour under full load
Vibration resistance: 0.35 mm (f = 5...57.6 Hz) conforming to IEC 60068-2-61 gn (f = 57.6...150 Hz) conforming to IEC 60255-21-1
Shock resistance: 15 gn 11 ms conforming to IEC 60255-21-1
Electrical durability: 100000 cycles
Insulation resistance: > 500 MOhm at 500 V DC conforming to IEC 60255-5> 500 MOhm at 500 V DC conforming to IEC 60664-1
Utilization category: AC-12 conforming to IEC 60947-5-1AC-13 conforming to IEC 60947-5-1AC-14 conforming to IEC 60947-5-1AC-15 conforming to IEC 60947-5-1DC-12 conforming to IEC 60947-5-1DC-13 conforming to IEC 60947-5-1
Control circuit voltage limits: - 12 % + 10 % Un
Overvoltage category: III conforming to IEC 60664-1
Relative humidity: 95 % at 131 °F (55 °C) conforming to IEC 60068-2-30
Response time: < 200 ms in the event of a fault
Housing material: Self-extinguishing plastic
Dielectric test voltage: 2 kV 1 min AC 50 Hz
Reset time: <= 1500 ms at 480 V
Electromagnetic compatibility: Emission standard for industrial environments conforming to EN/IEC 61000-6-4Emission standard for residential, commercial and light-industrial environments conforming to EN/IEC 61000-6-3Immunity for industrial environments conforming to EN/IEC 61000-6-2
Product or component type: Modular measurement and control relays
Maximum switching voltage: 250 V AC250 V DC
Relay type: Multifunction control relay
Minimum switching current: 10 mA at 5 V DC
Product certifications: GOSTCSAGLULC-Tick
Product specific application: For 3-phase supply

Maximum switching current: 5 A AC5 A DC
Directives: 73/23/EEC - low voltage directive89/336/EEC - electromagnetic compatibility
Relay name: RM35TF
Supply voltage limits: 194...528 V AC, 3 phases
Ambient air temperature for storage: -40...158 °F (-40...70 °C)
Relay monitored parameters: Phase sequenceAsymmetryPhase failure detectionUndervoltage and overvoltage in window mode
Ambient air temperature for operation: -4...122 °F (-20...50 °C)
Time delay type: Adjustable 0.1...10 s, +/- 10 % of the full scale value
power consumption in VA: 0...22 VA at 400 V AC 50 Hz
switching capacity in VA: 1250 VA
Voltage detection threshold: < 194 V
Measurement range: 208...480 V voltage AC
Control circuit frequency: 50...60 Hz +/- 10 %
Output contacts: 2 C/O
Nominal output current: 5:00 AM
Pollution degree: 3 conforming to IEC 60664-1
Measurement voltage limits: 176...528 V AC
Hysteresis: 2%
Non-dissipating shock wave: 4 kV
Run-up delay at power-up: <= 650 ms
Measuring cycle: <= 140 ms measurement cycle as true rms value
Threshold adjustment voltage: +2...+20 % in the range 220...440 V AC-20...-2 % in the range 380...480 V AC+2...+10 % in the range 480 V AC-12...-2 % in the range 220 V AC2...20 % of Un selected
Voltage range: 220...480 V phase to phase
Adjustment of asymmetry threshold: 5...15 % of Un selected
Repeat accuracy: 0.3 % time delay0.5 % input and measurement circuit
Measurement error: < 1 % over the whole range with voltage variation0.05 %/°C with temperature variation
Marking: CE
Supply frequency: 50/60 Hz +/- 10 %
Operating position: Any position without
Local signaling: LED green power ONLED yellow relay ONLED yellow fault
Safety reliability data: B10d = 360000MTTFd = 399.5 years

Santa Clara Systems specializes in hard-to-find parts. Choose from our overstock inventory and save on RM35TF30 . Santa Clara Systems carries 10,454 items from Telemecanique.