Out of Stock

EMMT-AS-60-M-LS-RSB

Festo - Servo Motor

Current response time:

By 5AM PT on Thursday

Emergency?

Description: Servo Motor
Ambient temperature: -40 °C ... 40 °C
Note on ambient temperature: Up to 80 °C with derating of -1.5% per degree Celsius
Max. installation height: 4000 m
Information on max. installation height: With 1,000 m and longer only with derating of -1.0% per 100 m
Storage temperature: -40 °C ... 70 °C
Relative air humidity: 0 - 90%
Conforms to standard: IEC 60034
Thermal class according to EN 60034-1: F
Max. winding temperature: 155 °C
Rating class according to EN 60034-1: S1
Temperature monitoring: Digital motor temperature transmission via EnDat® 2.2
Motor type as per EN 60034-7: IM V1 - IM V3
Mounting position: Any
Degree of protection: IP40
Note on degree of protection: IP67 for motor housing, incl. connection technology
Concentricity, coaxiality, axial runout according to DIN SPEC 42955: N
Balancing quality: G 2.5
Detent torque: <1.0% of peak torque
Bearing lifetime, under nominal conditions: 20000 h
Interface code, motor out: 60P
Electrical connection 1, connection type: Hybrid plug
Electrical connection 1, connection technology: M23x1
Electrical connection 1, number of pins/wires: 15
Electrical connection for input 1, connection pattern: 00995913
Contamination level: 2
Note on materials: RoHS compliant
Corrosion resistance class (CRC): 0 - No corrosion stress
LABS (PWIS) conformity: VDMA24364 Zone III
Vibration resistance: Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6
Shock resistance: Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27
Certification: RCM compliance mark, c UL us - recognized (OL)
CE marking (see declaration of conformity): As per EU EMC directive - As per EU low voltage directive - As per EU RoHS directive
UKCA marking (see declaration of conformity): To UK RoHS instructions - To UK instructions for electrical equipment
Certificate issuing authority: UL E342973
Nominal operating voltage DC: 325 V
Type of winding switch: Star inside
Number of pole pairs: 5
Stall torque: 1.15 Nm
Nominal torque: 1 Nm
Peak torque: 3.4 Nm
Nominal rotary speed: 3000 rpm
Max. rotational speed: 6800 rpm
Max. mechanical speed: 16000 rpm
Angular acceleration: ≤100000 rad/s²

Motor nominal power: 310 W
Continuous stall current: 2.5 A
Motor nominal current: 2.2 A
Peak current: 11 A
Motor constants: 0.45 Nm/A
Standstill torque constant: 0.53 Nm/A
Voltage constant, phase-to-phase: 32 mVmin
Phase-phase winding resistance: 4.85 Ohm
Winding inductance phase-phase: 20 mH
Winding longitudinal inductivity Ld (phase): 8 mH
Cross inductivity Lq (phase): 10 mH
Electric time constant: 2.7 ms
Thermal time constant: 42 min
Thermal resistance: 1.3 K/W
Measuring flange: 250 x 250 x 15 mm, steel
Total output inertia moment: 0.373 kgcm²
Permissible axial shaft load: 70 N
Permissible radial shaft load: 350 N
Rotor position sensor: Absolute single-turn encoder
Rotor position sensor for manufacturer designation: ECI 1118
Rotor position encoder for absolutely detectable revolutions: 1
Rotor position sensor interface: EnDat 22
Rotor position sensor measuring principle: Inductive
Rotor position encoder for DC operating voltage: 5 V
Rotor position encoder for DC operating voltage range: 3.6 V ... 14 V
Rotor position encoder for positional values per revolution: 262144
Rotor position sensor resolution: 18 bit
Rotor position encoder system accuracy angle measurement: -120 arcsec ... 120 arcsec
Brake holding torque: 2.5 Nm
Brake DC operating voltage: 24 V
Brake current consumption: 0.46 A
Brake power consumption: 11 W
Brake coil resistance: 52.4 Ohm
Brake coil inductivity: 700 mH
Brake separation time: ≤35 ms
Brake closing time: 10 ms
DC brake response delay: ≤2 ms
Max. brake no-load speed: 10000 rpm
Max. friction work per braking operation: 5600 J
Number of emergency stops per hour: 1
Total brake friction work: 615 kJ
Brake mass moment of inertia: 0.074 kgcm²
Switching cycles, holding brake: 10 million idle actuations (without friction work!)
MTTF, subcomponent: 190 years, rotor position encoder

Santa Clara Systems specializes in hard-to-find parts. Choose from our overstock inventory and save on EMMT-AS-60-M-LS-RSB . Santa Clara Systems carries 9,543 items from Festo.

We are in the process of adding data and downloadable material for this item. Please search similar items for more information related to this product.