VG-036

Keyence - Laser Micrometer Sensor

Current response time:

13 Minutes 54 Seconds

Description: Laser Micrometer Sensor
Weight: Approx 360 g (transmitter), Approx 320 g (receiver)
Footnotes: *1 F.S. (= 30 mm 1.18") indicates the range resulting from 2.5 mm 0.10" subtraction from each end of the 35 mm 1.38" measuring range. *2 Typical data obtained when the T-to-R distance was 100 mm 3.94", the receiver-to-target distance was 50 mm 1.97" and a knife edge was used to interrupt the laser beam. *3 Typical data obtained when the T-to-R distance was 100 mm 3.94" and the receiver-to-target distance was 50 mm 1.97". *4 This is a typical example when the distance between the transmitter and receiver has been set to 100 mm and a knife edge has been used to block light at a position that is 50 mm from the receiver. F.S. = 30 mm displays the measurement accuracy range. *5 NPN output can easily be converted into PNP output by connecting the optional OP-5148 PNP output converter.
Response time: 3.9 ms (number of averaging measurements : 1)
Material: Die-cast aluminum
Resolution: 5 µm 0.20 Mil (number of averaging measurements : 16) Light-receiving element/CCD 5,000 bit, Scan time : 1.3 ms*2
Light source - Type: Visible red semiconductor laser
Light source - Maximum output: 38 µW
Light source - Wavelength: 670 nm
Light source - FDA (CDRH) 21CFR Part 1040.10: Class II Laser Product, Output : 38 µW
Light source - IEC 60825-1: Class 1 Laser Product, Output : 0.2 mW
Measuring area: 35 mm 1.38"
Setting distance: 0 to 300 mm 11.81"
Linearity: ±0.1% of F.S. (F.S. = 30 mm 1.18") *1*2
Minimum displayable unit: 5 µm 0.20 Mil
Minimum detectable object: 0.5 mm 0.02" dia. opaque material*3
Repeatability: *4
Interface: RS-232C

Monitor output - Output voltage: ±7 V
Monitor output - Impedance: 100 ?
Control output - Control: HI, GO, LO : NPN 100 mA, 40 V max.*5
Analog output - Resolution (ripple): 2 mV (number of averaging measurements : 4096)
Self-timing: NPN open collector : 100 mA max., (40 V max.) (one-shot output time : 1.3 ms)*5
Stability output: NPN open collector : 100 mA max., (40 V max.) (N.C.)*5
Control input: - Upper/ Lower limit select input - Auto-zero input - Auto-gain input - Reset input - Laser remote input voltage contact signals - Hold input
Number of CCD pixels: 5000bit
Scanning time: 1.3ms
Temperature fluctuation: 0.01% of F.S./°C (F.S. = 30 mm 1.18")
Rating - Power voltage: 24 VDC ±10%, Ripple (P-P) 10% max.
Rating - Current consumption.: 330mA or less
Environmental resistance - Operating ambient luminance: Incandescent lamp : 1,000 lux max., Fluorescent lamp : 8,000 lux max.*2
Environmental resistance - Operating temperature range: 0 to +40? 32°F to 104°F
Environmental resistance - Operating ambient humidity: 35 to 85% RH (No condensation)
Environmental resistance - Vibration: 10 to 55 Hz, 1.5 mm 0.06" double amplitude for 2 hours in each of the X, Y, and Z directions
Environmental resistance - Enclosure rating: IP60

Santa Clara Systems specializes in hard-to-find parts. Choose from our overstock inventory and save on VG-036 . Santa Clara Systems carries 2,109 items from Keyence.

We are in the process of adding data and downloadable material for this item. Please search similar items for more information related to this product.