• Telemecanique LC1D09BD TeSys D contactor - 3P(3 NO) - AC-3 - <= 440 V 9 A - 24 V DC coil Product Image
  • Telemecanique LC1D09BD TeSys D contactor - 3P(3 NO) - AC-3 - <= 440 V 9 A - 24 V DC coil Product Image
  • Telemecanique LC1D09BD TeSys D contactor - 3P(3 NO) - AC-3 - <= 440 V 9 A - 24 V DC coil Product Image
  • Telemecanique LC1D09BD Barcode

LC1D09BD

产品概述:

  • Product weight: 1.06 lb(US) (0.48 kg)
  • Range of product: TeSys D
  • IP degree of protection: IP20 front face conforming to IEC 60529
  • Device short name: LC1D
  • Width: 1.77 in (45 mm)
咨价咨询

Current response time:

10 Minutes 47 Seconds
  • 介绍: TeSys D contactor - 3P(3 NO) - AC-3 - <= 440 V 9 A - 24 V DC coil
  • Product weight: 1.06 lb(US) (0.48 kg)
  • Range of product: TeSys D
  • IP degree of protection: IP20 front face conforming to IEC 60529
  • Standards: CSA C22.2 No 14, EN 60947-4-1, EN 60947-5-1, IEC 60947-4-1, IEC 60947-5-1, UL 508
  • Device short name: LC1D
  • Width: 1.77 in (45 mm)
  • Height: 3.03 in (77 mm)
  • Depth: 3.74 in (95 mm)
  • Protective treatment: TH conforming to IEC 60068-2-30
  • [Ui] rated insulation voltage: 600 V power circuit certifications CSA, 600 V power circuit certifications UL, 690 V power circuit conforming to IEC 60947-4-1, 690 V signaling circuit conforming to IEC 60947-1, 600 V signaling circuit certifications CSA, 600 V signaling circuit certifications UL
  • [Uimp] rated impulse withstand voltage: 6 kV conforming to IEC 60947
  • Operating altitude: 9842.52 ft. (3000 m) without derating in temperature
  • Mechanical durability: 30 Mcycles
  • Tightening torque: Power circuit: 15.04 lbf.in (1.7 N.m) - on screw clamp terminals - with screwdriver flat 6 mm, Power circuit: 15.04 lbf.in (1.7 N.m) - on screw clamp terminals - with screwdriver Philips No 2, Control circuit: 15.04 lbf.in (1.7 N.m) - on screw clamp terminals - with screwdriver flat 6 mm, Control circuit: 15.04 lbf.in (1.7 N.m) - on screw clamp terminals - with screwdriver Philips No 2
  • Connections - terminals: Control circuit: screw clamp terminals 2 cable(s) 0...0 in (1...2.5 mm) - cable stiffness: flexible - with cable end, Power circuit: screw clamp terminals 1 cable(s) 0...0.01 in (1...4 mm) - cable stiffness: flexible - with cable end, Control circuit: screw clamp terminals 1 cable(s) 0...0.01 in (1...4 mm) - cable stiffness: flexible - without cable end, Control circuit: screw clamp terminals 2 cable(s) 0...0.01 in (1...4 mm) - cable stiffness: flexible - without cable end, Control circuit: screw clamp terminals 1 cable(s) 0...0.01 in (1...4 mm) - cable stiffness: flexible - with cable end, Control circuit: screw clamp terminals 1 cable(s) 0...0.01 in (1...4 mm) - cable stiffness: solid - without cable end, Control circuit: screw clamp terminals 2 cable(s) 0...0.01 in (1...4 mm) - cable stiffness: solid - without cable end, Power circuit: screw clamp terminals 1 cable(s) 0...0.01 in (1...4 mm) - cable stiffness: flexible - without cable end, Power circuit: screw clamp terminals 2 cable(s) 0...0.01 in (1...4 mm) - cable stiffness: flexible - without cable end, Power circuit: screw clamp terminals 2 cable(s) 0...0 in (1...2.5 mm) - cable stiffness: flexible - with cable end, Power circuit: screw clamp terminals 1 cable(s) 0...0.01 in (1...4 mm) - cable stiffness: solid - without cable end, Power circuit: screw clamp terminals 2 cable(s) 0...0.01 in (1...4 mm) - cable stiffness: solid - without cable end
  • Range: TeSys
  • Mounting support: Rail, Plate
  • [Ith] conventional free air thermal current: 25 A at <= 140 F (60 C) power circuit, 10 A at <= 140 F (60 C) signaling circuit
  • System Voltage: <= 300 V DC power circuit, <= 690 V AC 25...400 Hz power circuit
  • Operating rate: 3600 cyc/h at <= 140 F (60 C)
  • Product name: TeSys D
  • [Uc] control circuit voltage: 24 V DC
  • Electrical durability: 0.6 Mcycles 25 A AC-1 at Ue <= 440 V, 2 Mcycles 9 A AC-3 at Ue <= 440 V
  • Insulation resistance: > 10 MOhm signaling circuit
  • motor power kW: 2.2 kW at 400 V AC 50/60 Hz AC-4, 2.2 kW at 220...230 V AC 50/60 Hz AC-3, 4 kW at 380...400 V AC 50/60 Hz AC-3, 5.5 kW at 500 V AC 50/60 Hz AC-3, 5.5 kW at 660...690 V AC 50/60 Hz AC-3, 4 kW at 415...440 V AC 50/60 Hz AC-3
  • [Ie] rated operational current: 25 A (<= 140 F (60 C)) at <= 440 V AC AC-1 power circuit, 9 A (<= 140 F (60 C)) at <= 440 V AC AC-3 power circuit
  • Utilization category: AC-4, AC-3, AC-1
  • Control circuit voltage limits: 0.1...0.25 Uc drop-out at 140 F (60 C), DC, 0.7...1.25 Uc operational at 140 F (60 C), DC
  • Poles description: 3P
  • Overvoltage category: III
  • Operating time: 53.55...72.45 ms closing, 16...24 ms opening
  • Associated fuse rating: 20 A gG at <= 690 V coordination type 2 power circuit, 25 A gG at <= 690 V coordination type 1 power circuit, 10 A gG signaling circuit conforming to IEC 60947-5-1
  • Control circuit type: DC standard
  • Number of Poles: 3-Pole (3 NO)
  • Mounting Style: 35mm DIN Rail
  • Contactor Type: Non-Reversing
  • Inductive Amperes (AC3): 9A
  • Resistive Amperes (AC1): 20A
  • Horsepower Rating (1-Phase): 0.5HP@115Vac - 1HP@230Vac
  • Horsepower Rating (3-Phase): 2HP@200/230Vac - 5HP@460Vac - 7.5HP@575Vac
  • Coil Voltage Code: BD
  • Coil technology: Built-in bidirectional peak limiting diode suppressor
  • Time constant: 28 ms
  • Pollution degree: 3
  • Product or component type: Contactor
  • inrush power in W: 5.4 W at 68 F (20 C)
  • Ambient air temperature for operation: 23...140 F (-5...60 C)
  • hold-in power consumption in W: 5.4 W at 68 F (20 C)
  • Ambient air temperature for storage: -76...176 F (-60...80 C)
  • Contactor application: Resistive load, Motor control
  • Auxiliary contacts type: Type mechanically linked (1 NO + 1 NC) conforming to IEC 60947-5-1, Type mirror contact (1 NC) conforming to IEC 60947-4-1
  • Permissible ambient air temperature around the device: -40...158 F (-40...70 C) at Uc
  • Signaling circuit frequency: 25...400 Hz
  • Minimum switching current: 5 mA signaling circuit
  • Fire resistance: 1562 F (850 C) conforming to IEC 60695-2-1
  • Pole contact composition: 3 NO
  • Minimum switching voltage: 17 V signaling circuit
  • Flame retardance: V1 conforming to UL 94
  • Non-overlap time: 1.5 ms on energisation between NC and NO contact, 1.5 ms on de-energisation between NC and NO contact
  • Mechanical robustness: Vibrations contactor open 2 Gn, 5...300 Hz, Vibrations contactor closed 4 Gn, 5...300 Hz, Shocks contactor open 10 Gn for 11 ms, Shocks contactor closed 15 Gn for 11 ms
  • Power range: 1.1...2 kW 200...240 V 3 phases, 2.2...3 kW 380...440 V 3 phases, 4...6 kW 380...440 V 3 phases, 4...6 kW 480...500 V 3 phases
  • Motor power hp: 0.33 hp at 115 V AC 50/60 Hz for 1 phase motors, 1 hp at 230/240 V AC 50/60 Hz 1 phase motors, 2 hp at 200/208 V AC 50/60 Hz 3 phases motors, 2 hp at 230/240 V AC 50/60 Hz 3 phases motors, 5 hp at 460/480 V AC 50/60 Hz 3 phases motors, 7.5 hp at 575/600 V AC 50/60 Hz 3 phases motors
  • Motor starter type: Direct on-line contactor
  • Contactor coil voltage: 24 V DC standard
  • Auxiliary contact composition: 1 NO + 1 NC
  • Irms rated making capacity: 250 A at 440 V power circuit conforming to IEC 60947, 140 A AC signaling circuit conforming to IEC 60947-5-1, 250 A DC signaling circuit conforming to IEC 60947-5-1
  • Rated breaking capacity: 250 A at 440 V power circuit conforming to IEC 60947
  • [Icw] rated short-time withstand current: 105 A <= 104 F (40 C) 10 s power circuit, 210 A <= 104 F (40 C) 1 s power circuit, 30 A <= 104 F (40 C) 10 min power circuit, 61 A <= 104 F (40 C) 1 min power circuit, 100 A 1 s signaling circuit, 120 A 500 ms signaling circuit, 140 A 100 ms signaling circuit
  • Average impedance: 2.5 mOhm at 50 Hz - Ith 25 A power circuit
  • Power dissipation per pole: 0.2 W AC-3, 1.56 W AC-1
  • Protective cover: With
  • Product certifications: RINA, BV, UL, CCC, GOST, CSA, DNV, GL, LROS (Lloyds register of shipping)
  • Safety reliability level: B10d = 1369863 cycles contactor with nominal load conforming to EN/ISO 13849-1, B10d = 20000000 cycles contactor with mechanical load conforming to EN/ISO 13849-1
Santa Clara Systems专长寻找难觅的零件。请选择我们积压库存,然后储存在 LC1D09BD 。Santa Clara Systems大约持有 9,147 项产品 Telemecanique.
  • Tesys D Contactor - 3P(3 No) - Ac-3 - <= 440 V 9 A - 24 V Dc Coil

交替

  • LC1D09-BD

常见错字

  • 1C1D098D
  • 1C1D09BD
  • 1C1DO98D
  • 1C1DO9BD
  • 1CID098D
  • 1CID09BD
  • 1CIDO98D
  • 1CIDO9BD
  • 1CLD098D
  • 1CLD09BD
  • 1CLDO98D
  • 1CLDO9BD
  • IC1D098D
  • IC1D09BD
  • IC1DO9BD
  • LC1D098D
  • LC1DO98D
  • LC1DO9BD
  • LCID098D
  • LCID09BD
  • LCIDO98D
  • LCIDO9BD
  • LCLD098D
  • LCLD09BD
  • LCLDO98D
  • LCLDO9BD

附加的数字

  • LC1D09BD-A
  • LC1D09BD-B
  • LC1D09BD-C
  • LC1D09BD-D
  • LC1D09BD-E
  • LC1D09BD-F
  • LC1D09BD-G
  • LC1D09BD-H
  • LC1D09BD-I
  • LC1D09BD-J
  • LC1D09BD-K
  • LC1D09BD-L
  • LC1D09BD-M
  • LC1D09BD-N
  • LC1D09BD-O
  • LC1D09BD-P
  • LC1D09BD-Q
  • LC1D09BD-R
  • LC1D09BD-S
  • LC1D09BD-T
  • LC1D09BD-U
  • LC1D09BD-V
  • LC1D09BD-W
  • LC1D09BD-X
  • LC1D09BD-Y
  • LC1D09BD-Z

客户喜爱的产品

满足您所需要的物流

Late West Coast Shipping Hours
晚间西海岸物流(下午5点太平洋时间)
直销业务与匿名转运商专家
专业包装防静电
当天发货服务
内部速递国内和国际
visa credit card logo mastercard credit card logo discover credit card logo american express credit card logo

与我们合作的客户

3M logo
Kaiser Permanente logo
Safeway Logo
Georgia-Pacific logo
Coca Cola logo
duke energy logo
BART logo
Pepsi logo
LA DWP logo
US Navy logo
Dean Foods logo
ConAgra Brands logo