CPX-AP-I-PN-M12

Festo - PROFINET Interface

Current response time:

15 Minutes 7 Seconds

Description: PROFINET Interface
Ambient temperature: -20 °C ... 50 °C
Dimensions W x L x H: 45 mm x 170 mm x 35 mm
Type of mounting: On H-rail with accessories With through-hole
Max. number of modules: 80
Product weight: 186 g
Storage temperature: -40 °C ... 70 °C
Relative air humidity: 5 - 95 % Non-condensing
Degree of protection: IP65 IP67
Corrosion resistance class (CRC): 1 - Low corrosion stress
Max. cable length: 50 m system communication
Information on max. cable length: Power supply according to nominal voltage
LABS (PWIS) conformity: VDMA24364-B2-L
Cleanroom class: Statically installed element, no meaningful evaluation possible according to ISO 14644-1
CE marking (see declaration of conformity): As per EU EMC directive
UKCA marking (see declaration of conformity): To UK instructions for EMC
KC characters: KC EMC
Certification: RCM compliance mark c UL us - Listed (OL)
Certificate issuing authority: UL E239998
Housing material: PA PC Die-cast zinc, nickel-plated
O-ring material: FPM
Diagnostics via LED: Diagnostics per module Network error Power supply for electronics/sensors Load power supply System diagnostics Maintenance required
Diagnostics via bus: APDD invalid Load switch-off Communication with AP module interrupted Electronics/sensors overvoltage Load overvoltage Electronics/sensors undervoltage Load undervoltage
Diagnose per internal communication: Module error Output short circuit/overload Short circuit/overload in sensor supply Load supply undervoltage
Fieldbus interface, type: Ethernet
Fieldbus interface, protocol: PROFINET IRT PROFINET RT
Fieldbus interface, function: Bus connection, incoming/forwarding
Fieldbus interface, connection type: 2x socket
Fieldbus interface, connection technology: M12x1, D-coded as per EN 61076-2-101

Fieldbus interface, number of poles/wires: 4
Fieldbus interface, galvanic isolation: Yes
Fieldbus interface, transmission rate: 100 Mbit/s
Max. address capacity inputs: 1024 byte
Max. address capacity outputs: 1024 byte
Configuration support: GSDML file
Communication interface, function: System communication XF20 OUT / XF21 OUT
Communication interface, connection type: 2x socket
Communication interface, connection technology: M8x1, D-coded as per EN 61076-2-114
Communication interface, number of pins/wires: 4
Communication interface, protocol: AP
Communication interface, shielding: Yes
Power supply, function: Incoming electronics/sensors and load
Power supply, type of connection: Plug
Power supply, connection technology: M8x1, A-coded as per EN 61076-2-104
Power supply, number of pins/wires: 4
Voltage forwarding, function: Outgoing electronics/sensors and load
Voltage forwarding, connection type: Socket
Voltage forwarding, connection technology: M8x1, A-coded as per EN 61076-2-104
Voltage forwarding, number of pins/wires: 4
Nominal operating voltage DC load: 24 V
Permissible voltage fluctuations load: ± 25 %
Nominal operating voltage DC for electronics/sensors: 24 V
Permissible voltage fluctuations for electronics/sensors: ± 25 %
Max. power supply: 2 x 4 A (external fuse required)
Intrinsic current consumption at nominal operating voltage for electronics/sensors: Typically 80 mA
Intrinsic current consumption at nominal operating voltage load: Typically 5 mA
Power failure buffering: 10 ms
Reverse polarity protection: Yes

Santa Clara Systems specializes in hard-to-find parts. Choose from our overstock inventory and save on CPX-AP-I-PN-M12 . Santa Clara Systems carries 7,168 items from Festo.

We are in the process of adding data and downloadable material for this item. Please search similar items for more information related to this product.