Out of Stock

Telemecanique TWD LMDA40DTK extendable PLC base Twido 24 V - 24 I 24 V DC - 16 O solid state Product Image

TWDLMDA40DTK

Telemecanique - extendable PLC base Twido 24 V - 24 I 24 V DC - 16 O solid state

Current response time:

By 5AM PT on Monday

Emergency?

*Santa Clara Systems is not a Telemecanique Authorized Distributor.

Description: extendable PLC base Twido 24 V - 24 I 24 V DC - 16 O solid state
Range of product: Twido
IP degree of protection: IP20
Operating altitude: 0...6561.68 ft. (0...2000 m)
Vibration resistance: 0.075 mm, 10...57 Hz mounting on: 35 mm symmetrical DIN rail1 gn, 57...150 Hz mounting on: 35 mm symmetrical DIN rail1.6 mm, 2...25 Hz mounting on: plate or panel with fixing kit4 gn, 25...100 Hz mounting on: plate or panel with fixing kit
Shock resistance: 15 gn 11 ms
Insulation resistance: > 10 MOhm at 500 V, between I/O and earth terminals> 10 MOhm at 500 V, between supply and earth terminals
[Us] rated supply voltage: 24 V DC
Relative humidity: 30...95 % without condensation
Protection type: Power protection with internal fuse
Response time: 300 µs for Q0.2 to Q0.7 at state 0300 µs for Q0.2 to Q0.7 at state 15 µs for Q0.0 to Q0.1 at state 05 µs for Q0.0 to Q0.1 at state 1
Input voltage limits: 20.4...26.4 V
Immunity to micro breaks: 10 ms
Product or component type: Modular base controller
Discrete input current: 5 mA for I0.0 to I0.15 mA for I0.6 to I0.77 mA for I0.2 to I0.57 mA for I0.8 to I0.11
Dielectric strength: 1500 V for 1 minute, between I/O and earth terminals500 V for 1 minute, between supply and earth terminals
discrete I/O number: 20
Input impedance: 100000 Ohm
Product certifications: CSAUL
Discrete input number: 12
Filter time: 150 µs for I0.2 to I0.5 at state 0150 µs for I0.8 to I0.11 at state 035 µs for I0.0 to I0.1 at state 135 µs for I0.6 to I0.7 at state 140 µs for I0.2 to I0.5 at state 140 µs for I0.8 to I0.11 at state 145 µs for I0.0 to I0.1 at state 045 µs for I0.6 to I0.7 at state 0
Marking: CE
Discrete input logic: Sink or source
Insulation between channel and internal logic: 1500 Vrms for 1 minute
Ambient air temperature for storage: -13...158 °F (-25...70 °C)
Discrete input voltage: 24 V
Insulation resistance between channel: None
Ambient air temperature for operation: 32...131 °F (0...55 °C)
Discrete input voltage type: DC
Discrete output voltage: 24 V
Discrete output number: 8 transistor (source)

Output voltage limits: 20.4...28.8 V
Current per channel: 0.36 A for transistor output
number of I/O expansion module: 4
Current per output common: 1 A for transistor output
Storage altitude: 0...9842.52 ft. (0...3000 m)
Free slots: 2
Use of slot: 32 K memory cartridge and 1 real-time clock
[Ures] residual voltage: <= 1 V at state 1
Leakage current: 0.1 mA
Output overvoltage protection: 39 V
Tungsten load: 8 W
Discrete output current: 300 mA
I/O connection: HE-10 connector
Input/output number: <= 116, spring terminal block with I/O expansion module<= 148, HE-10 connector with I/O expansion module<= 84, removable screw terminal block with I/O expansion module
Supply voltage limits: 20.4...26.4 V
power consumption in W: <= 15 W (base + 4 expansion module)
Inrush current: <= 1 A for transistor output<= 50 A for power supply
Program memory: 3000 instructions
Exact time for 1: 1 ms
System overhead: 0.5 ms
Memory description: Internal RAM, 128 counters, no floating, no trigonometricalInternal RAM, 128 timers, no floating, no trigonometricalInternal RAM, 256 internal bits, no floating, no trigonometricalInternal RAM, 3000 internal words, no floating, no trigonometricalInternal RAM, double words, no floating, no trigonometrical
Battery type: Lithium for internal RAM, autonomy: 30 days, charging time = 15 h, battery life = 10 yr
Integrated connection type: Non isolated serial link mini DIN, Modbus/character mode master/slave RTU/ASCII (RS485) half duplex, 38,4 kbit/sPower supply
Counting input number: 2 channel(s) at 20000 Hz 32 bits2 channel(s) at 5000 Hz 16 bits
Positioning functions: PWM/PLS 2 channel(s) at 7 kHz
Analogue input number: 1
Analogue input range: 0...10 V
Analogue input resolution: 9 bits
Complementary function: PIDEvent processing
Analogue adjustment points: 1 point adjustable from 0...1023
status LED: 1 LED ERR1 LED STAT1 LED green PWR1 LED green RUN1 LED per channel I/O status

Santa Clara Systems specializes in hard-to-find parts. Choose from our overstock inventory and save on TWDLMDA40DTK . Santa Clara Systems carries 10,454 items from Telemecanique.