IC697MDL240

General Electric - 120 VAC Isolated Input 16-PT

Current response time:

7 Minutes 31 Seconds

Description: 120 VAC Isolated Input 16-PT
Type of Device: 120 Volt AC, Isolated, 16-Point Input Module
Product Description: The 120 Volt AC Isolated Input Module provides 16 input points which are isolated. This allows each point to be used on a different phase of the AC supply. The input is reactive (resistor/capacitor input) with current-voltage characteristics which meet IEC standard (type 2). The input characteristics are compatible with a large range of available proximity switches. LED indicators which give the ON-OFF status of each point on the logic (PLC) side of the circuit are included at the top of the module. The module is mechanically keyed to allow correct replacement with a similar type in the field. I/O references are user configurable without the use of jumpers or DIP switches on the module.
Rated Voltage: 120 Volts AC, 60 Hz Sinusoidal
Inputs Per Module: 16 Individually Isolated
Isolation: 1500 volts RMS - any input to backplane, 500 volts RMS between inputs
Input Current: 10mA (typical) at rated voltage (reactive)
On-state Voltage: 75 volts to 132 volts, 60 Hz sinusoidal

Off-state Voltage: 0 to 20 volts, 60 Hz sinusoidal
On-state Current: 8mA to 15 mA
Off-state Current: 0 to 4mA (2.2mA minimum at 25V input)
Filter Delay Time: 20ms typical
Current Req. from 5V Bus: 0.25 amps
VME: System designed to support the VME standard C.1
Features: 16 isolated points, 20 ms input filter, proximity switch compatible

Santa Clara Systems specializes in hard-to-find parts. Choose from our overstock inventory and save on IC697MDL240 . Santa Clara Systems carries 6,250 items from General Electric.

We are in the process of adding data and downloadable material for this item. Please search similar items for more information related to this product.