• Telemecanique ATV 930U22N4 Variable Speed Drive Product Image
  • Telemecanique ATV 930U22N4 Variable Speed Drive Product Image
  • Telemecanique ATV 930U22N4 Variable Speed Drive Product Image
  • Telemecanique ATV 930U22N4 Variable Speed Drive Product Image
  • Telemecanique ATV 930U22N4 Barcode

ATV930U22N4

Get a Quote

Current response time:

17 Minutes 35 Seconds
  • Description: Variable Speed Drive
  • Range of product: Altivar Process ATV900
  • IP degree of protection: IP21 conforming to IEC 61800-5-1
  • Standards: UL 508C
  • Device short name: ATV930
  • Width: 144 mm
  • Height: 350 mm
  • Depth: 206 mm
  • Operating altitude: <= 1000 m without
  • Vibration resistance: 1.5 mm peak to peak (f= 213 Hz) conforming to IEC 60068-2-6
  • Shock resistance: 15 gn for 11 ms conforming to IEC 60068-2-27
  • Electrical connection: Control: screw terminal0.5...1.5 mm/AWG 20...AWG 16
  • Insulation resistance: > 1 MOhm 500 V DC for 1 minute to earth
  • motor power kW: 2.2 kW (normal duty)
  • [Us] rated supply voltage: 380...480 V - 15...10 %
  • Relative humidity: 595 % without condensation conforming to IEC 60068-2-3
  • Protection type: Thermal protection: motor
  • Switching frequency: 2...16 kHz adjustable
  • Degree of protection: UL type 1 conforming to UL 508C
  • Product or component type: Variable speed drive
  • Device application: Industrial application
  • Variant: Standard version
  • Mounting mode: Wall mount
  • EMC filter: Integrated with 50 m conforming to EN/IEC 61800-3 category C2
  • Type of cooling: Forced convection
  • Supply frequency: 50...60 Hz +/- 5 %
  • Network number of phases: 3 phases
  • Motor power hp: 3 hp normal duty
  • Line current: 4.3 A at 380 V (normal duty)
  • prospective line Isc: 50 kA
  • Apparent power: 3.2 kVA at 480 V (normal duty)
  • Continuous output current: 5.6 A at 4 kHz for normal duty
  • Maximum transient current: 6.7 A during 60 s (normal duty)
  • Asynchronous motor control profile: Constant torque standard
  • Synchronous motor control profile: Permanent magnet motor
  • Speed drive output frequency: 0.1599 Hz
  • Nominal switching frequency: 4 kHz
  • Safety function: STO (safe torque off) SIL 3
  • Number of preset speeds: 16 preset speeds
  • Communication port protocol: Modbus TCP
  • Option module: Slot A: communication module for Profibus DP V1
  • Output voltage: <= power supply voltage
  • Motor slip compensation: Can be suppressed
  • Acceleration and deceleration ramps: Linear adjustable separately from 0.01...9999 s
  • Braking to standstill: By DC injection
  • Frequency resolution: Display unit: 0.1 Hz
  • Connector type: 2 RJ45 for Ethernet IP/Modbus TCP on the control block
  • Physical interface: 2-wire RS 485 for Modbus serial
  • Transmission frame: RTU for Modbus serial
  • Transmission rate: 10/100 Mbit/s for Ethernet IP/Modbus TCP
  • Exchange mode: Half duplex, full duplex, autonegotiation Ethernet IP/Modbus TCP
  • Data format: 8 bits, configurable odd, even or no parity for Modbus serial
  • Type of polarization: No impedance for Modbus serial
  • Number of addresses: 1247 for Modbus serial
  • Method of access: Slave Modbus TCP
  • Supply: External supply for digital inputs: 24 V DC (1930 V), <1.25 mA, protection type: overload and short-circuit protection
  • Local signalling: Local diagnostic: 3 LED (mono/dual colour)
  • Net weight: 4.5 kg
  • Analogue input number: 3
  • Analogue input type: AI1, AI2, AI3 software-configurable voltage: 0...10 V DC, impedance: 30 kOhm, resolution 12 bits
  • Discrete input number: 10
  • Discrete input type: DI1...DI8 programmable, 24 V DC (<= 30 V), impedance: 3.5 kOhm
  • Input compatibility: DI1...DI8: discrete input level 1 PLC conforming to EN/IEC 61131-2
  • Discrete input logic: Positive logic (source) (DI1...DI8), < 5 V (state 0), > 11 V (state 1)
  • Analogue output number: 2
  • Analogue output type: Software-configurable voltage AQ1, AQ2: 0...10 V DC impedance 470 Ohm, resolution 10 bits
  • Discrete output number: 2
  • Discrete output type: Logic output DQ+ 01 kHz <= 30 V DC 100 mA
  • Sampling duration: 2 ms +/- 0.5 ms (DI1...DI8) - discrete input
  • Linearity error: AI1, AI2, AI3: +/- 0.15 % of maximum value for analog input
  • Maximum switching current: Relay output R1 on resistive load, cos phi = 1: 3 A at 250 V AC
  • Relay output number: 3
  • Relay output type: Configurable relay logic R1: fault relay NO/NC electrical durability 100000 cycles
  • Refresh time: Relay output (R1, R2, R3): 5 ms (+/- 0.5 ms)
  • Minimum switching current: Relay output R1, R2, R3: 5 mA at 24 V DC
  • Isolation: Between power and control terminals
  • Variable speed drive application selection: Mixer Food and beverage processing
  • Power range: 2.23 kW at 380440 V 3 phases
  • Noise level: 54.5 dB conforming to 86/188/EEC
  • power dissipation in W: Natural convection: 30 W at 380 V, switching frequency 4 kHz
  • Volume of cooling air: 38 m3/h
  • Operating position: Vertical +/- 10 degree
  • maximum THDI: <48 % full load conforming to IEC 61000-3-12
  • Electromagnetic compatibility: Electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2
  • Environmental characteristic: Chemical pollution resistance class 3C3 conforming to EN/IEC 60721-3-3
  • Pollution degree: 2 conforming to EN/IEC 61800-5-1
  • Ambient air temperature for operation: -1550 C (without)
  • Ambient air temperature for storage: -4070 C
  • Product certifications: CSA
  • Marking: CE
  • Sustainable offer status: Green Premium product
  • REACh Regulation: REACh Declaration
  • Mercury free: Yes
  • RoHS exemption information: Yes
  • Environmental Disclosure: Product Environmental Profile
  • Circularity Profile: End of Life Information
Santa Clara Systems specializes in hard-to-find parts. Choose from our overstock inventory and save on ATV930U22N4 . Santa Clara Systems carries 10,295 items from Telemecanique.
We are in the process of adding data and downloadable material for this item. Please search similar items for more information related to this product.

Alternates

    Common Typos

    • ATV930U2ZN4
    • ATV930UZ2N4
    • ATV930UZZN4
    • ATV93OU22N4
    • ATV93OU2ZN4
    • ATV93OUZ2N4
    • ATV93OUZZN4

    Appended Numbers

    • ATV930U22N4-A
    • ATV930U22N4-B
    • ATV930U22N4-C
    • ATV930U22N4-D
    • ATV930U22N4-E
    • ATV930U22N4-F
    • ATV930U22N4-G
    • ATV930U22N4-H
    • ATV930U22N4-I
    • ATV930U22N4-J
    • ATV930U22N4-K
    • ATV930U22N4-L
    • ATV930U22N4-M
    • ATV930U22N4-N
    • ATV930U22N4-O
    • ATV930U22N4-P
    • ATV930U22N4-Q
    • ATV930U22N4-R
    • ATV930U22N4-S
    • ATV930U22N4-T
    • ATV930U22N4-U
    • ATV930U22N4-V
    • ATV930U22N4-W
    • ATV930U22N4-X
    • ATV930U22N4-Y
    • ATV930U22N4-Z

    Customers Are Also Buying

    We Deliver!

    Late West Coast Shipping Hours
    Late West Coast Shipping (5PM PST)
    Drop-Ship and Blind-Ship Specialists
    Expertly Packed Static-Limited
    Same-Day Service
    In-House Courier
    visa credit card logo mastercard credit card logo discover credit card logo american express credit card logo

    Customers we work with

    3M logo
    Kaiser Permanente logo
    Safeway Logo
    Georgia-Pacific logo
    Coca Cola logo
    duke energy logo
    BART logo
    Pepsi logo
    LA DWP logo
    US Navy logo
    Dean Foods logo
    ConAgra Brands logo