Out of Stock

PP7551

Efector - Pressure Sensor | PP-250-SBG14-Qfpkg/US/ /V

Current response time:

By 5AM PT on Wednesday

Emergency?

Description: Pressure Sensor | PP-250-SBG14-Qfpkg/US/ /V
Electrical Design: Pnp
Output Function: Normally Open / Closed; (Configurable)
Material: Stainless Steel (1.4301 / 304); Fkm; Epdm/X; Pa
Media: Liquids And Gases
Conditionally Suitable For: Use In Gases At Pressures > 25 Bar Only On Request
Medium Temperature [C]: -25...90
Pressure Rating: 400 Bar 5800 Psi 40 Mpa
Min. Bursting Pressure: 850 Bar 12300 Psi 85 Mpa
Type Of Pressure: Relative Pressure
Operating Voltage [V]: 9.6...36 Dc; (Communication Mode: 18...32)
Current Consumption [Ma]: < 45
Min. Insulation Resistance [M?]: 100; (500 V Dc)
Protection Class: Iii
Reverse Polarity Protection: Yes
Power-On Delay Time [S]: 0.3
Number Of Inputs And Outputs: Number Of Digital Outputs: 2
Total Number Of Outputs: 2
Output Signal: Switching Signal; Io-Link; (Configurable)
Number Of Digital Outputs: 2
Max. Voltage Drop Switching Output Dc [V]: 2
Permanent Current Rating Of Switching Output Dc [Ma]: 250
Switching Frequency Dc [Hz]: 170
Short-Circuit Protection: Yes
Type Of Short-Circuit Protection: Yes (Non-Latching)
Overload Protection: Yes
Measuring Range: 0...250 Bar 0...3625 Psi 0...25 Mpa
Set Point Sp: 2...250 Bar 40...3620 Psi 0.2...25 Mpa
Reset Point Rp: 1...249 Bar 20...3600 Psi 0.1...24.9 Mpa
In Steps Of: 1 Bar 20 Psi 0.1 Mpa
Factory Setting: Sp1 = 63 Bar Rp1 = 58 Bar Sp2 = 188 Bar Rp2 = 183 Bar Out1 = Hno Out2 = Hno
Switch Point Accuracy [% Of The Span]: < 0,5

Repeatability [% Of The Span]: < 0,1; (With Temperature Fluctuations < 10 K)
Characteristics Deviation [% Of The Span]: < 0,25 (Bfsl) / < 0,5 (Ls); (Bfsl = Best Fit Straight Line; Ls = Limit Value Setting)
Hysteresis Deviation [% Of The Span]: < 0,1
Long-Term Stability [% Of The Span]: < 0,1; (Per Year)
Temperature Coefficient Zero Point [% Of The Span / 10 K]: 0,2; (0...80 C)
Temperature Coefficient Span [% Of The Span / 10 K]: 0,2; (0...80 C)
Response Time [Ms]: < 3
Damping For The Switching Output Dap In Steps [S]: 0,003 - 0,006 - 0,010 - 0,017 - 0,060 - 0,125 - 0,250 - 0,500
Communication Interface: Io-Link
Transmission Type: Com2 (38,4 Kbaud)
Io-Link Revision: 1
Io-Link Device Id: 3 D / 00 00 03 H
Profiles: No Profile
Sio Mode: Yes
Required Master Port Class: A
Process Data Analogue: 1
Process Data Binary: 2
Min. Process Cycle Time [Ms]: 2.3
Ambient Temperature [C]: -25...85
Storage Temperature [C]: -40...100
Protection: Ip 68; (7 Days / 1 M Water Depth / 0.1 Bar)
Emc: Noise Immunity En 61000-6-2 En 61000-4-2 Esd 4 Kv Contact Discharge / 15 Kv Air Discharge En 61000-4-3 Hf Radiated 20 V/M En 61000-4-4 Burst 4 Kv Coupling Clamp En 61000-4-5 Surge 0,5 Kv Supply / 1 Kv Signal For Dc Units En 61000-4-6 Hf Conducted 10 V Noise Immunity According To The Automotive Directive 1995/54/Ec / 04/104Eg / 05/83/Eg Absorber Chamber Test To Iso 11452-2: 80 V/M En 50155 Klasse T3, C1, S1
Shock Resistance: Din Iec 60068-2-27 / Din Iec 60068-2-29 1000 G Din En 61373 Category 3
Vibration Resistance: Din Iec 68-2-6 20 G (10...2000 Hz) Din En 60068-2-64 14 G Din En 61373 Category 2
Ul Approval: Ul Approval Number J010
Materials (Wetted Parts): Stainless Steel (1.4305 / 303); Ceramics; Fkm
Min. Pressure Cycles: 100 Million
Process Connection: Threaded Connection G 1/4 External Thread Internal Threadm5
Display: Power 2 X Led, Green Switching Status 2 X Led, Yellow
Teach Function: Yes
Connection: Connector: 1 X M12
Alternate Manufacturer Name: IFM

Santa Clara Systems specializes in hard-to-find parts. Choose from our overstock inventory and save on PP7551 . Santa Clara Systems carries 2,210 items from Efector.

We are in the process of adding data and downloadable material for this item. Please search similar items for more information related to this product.