CPX-E-4AO-U-I

Festo - Analogue Output Module

Product Summary:

Ambient temperature: -5 °C ... 50 °C
Dimensions W x L x H: 18.9 mm x 76.6 mm x 124.3 mm
Width dimension: 18.9 mm
Type of mounting: With H-rail
Mounting position: Vertical - Horizontal

Current response time:

By 5AM PT on Wednesday

Emergency?

Description: Analogue Output Module
Ambient temperature: -5 °C ... 50 °C
Dimensions W x L x H: 18.9 mm x 76.6 mm x 124.3 mm
Width dimension: 18.9 mm
Type of mounting: With H-rail
Mounting position: Vertical - Horizontal
Note on ambient temperature: -5 - 60 °C for vertical installation
Storage temperature: -20 °C ... 70 °C
Relative air humidity: 95 % - Non-condensing
Degree of protection: IP20
Corrosion resistance class (CRC): 0 - No corrosion stress
Vibration resistance: Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6
Shock resistance: Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27
Protection against direct and indirect contact: PELV
Max. cable length: 30 m outputs - Shielded
LABS (PWIS) conformity: VDMA24364 zone III
CE marking (see declaration of conformity): As per EU EMC directive - As per EU RoHS directive
UKCA marking (see declaration of conformity): To UK RoHS instructions
KC characters: KC EMC
Certification: RCM compliance mark, c UL us - Listed (OL)
Certificate issuing authority: UL E239998
Note on materials: RoHS-compliant
Housing material: PA
Material of screws: Steel, galvanized
Diagnostics via LED: Faults per channel - Faults per module
Diagnostics via bus: Actuator supply short circuit/overload - Analog output short circuit/overload - Parameterization error - Nominal range was exceeded - Nominal range not reached - Load supply undervoltage - General error
Max. address capacity outputs: 8 byte
No. of outputs: 4
Module parameters: Response to actuator supply short circuit/overload - Response to analog output short circuit/overload
Channel parameters: Forcing channel x - Enable wire break/idling diagnostics - Enable parameterization error diagnostics - Enable overload/short circuit diagnostics - Signal range per channel
Power supply, type of connection: Terminal strip
Power supply, connection technology: Spring-loaded terminal
Power supply, connection pattern: 00995847
Power supply, number of pins/wires: 4
Nominal operating voltage DC load: 24 V

Permissible voltage fluctuations load: ± 25 %
Nominal operating voltage DC for electronics/sensors: 24 V
Permissible voltage fluctuations for electronics/sensors: ± 25 %
Power supply, conductor diameter: 0.2 mm² ... 1.5 mm²
Power supply, information on conductor diameter: 0.2 - 2.5 mm² for flexible conductors without cable end sleeves
Intrinsic current consumption at nominal operating voltage for electronics/sensors: Typically 60 mA
Intrinsic current consumption at nominal operating voltage load: Typically 15 mA
Power failure buffering: 10 ms
Reverse polarity protection: 24 V actuator supply against 0 V sensor supply - 24 V load against 0 V load - 24 V sensor supply against 0 V sensor supply
Electrical connection output, function: Analog output
Electrical connection output, connection type: 4x terminal strip
Electrical connection output, connection technology: Spring-loaded terminal
Electrical output connection, number of pins/wires: 4
Electrical connection for output, connection pattern: 00995841
Electrical connection for output, conductor cross section: 0.2 mm² ... 1.5 mm²
Electrical connection for output, information on conductor cross section: 0.2 - 2.5 mm² for flexible conductors without cable end sleeves
Electrical connection output 2, function: Functional ground
Electrical connection output 2, connection type: Terminal strip
Electrical connection output 2, connection technology: Spring-loaded terminal
Electrical output connection 2, number of pins/wires: 4
Electrical connection for output 2, connection pattern: 00995842
Electrical connection for output 2, conductor cross section: 0.2 mm² ... 1.5 mm²
Electrical connection for output 2, Information on conductor cross section: 0.2 - 2.5 mm² for flexible conductors without cable end sleeves
Behavior after end of overload of the outputs: No automatic return (default) - Parameterizable (module by module)
Max. residual current of outputs per module: 2 A
Measured variable: Voltage - Current
Data format: 15 bit + sign - Linear scaling
Signal range: -10 - 10 V, -5 - 5 V, 0 - 10 V, -20 - 20 mA, 0 - 20 mA, 4 - 20 mA
Repetition accuracy: ±0.05 % at 25 °C
Basic error limit at 25°C: ±0.1 %
Operating error limit related to the ambient temperature range: ±0.3 %
Electrical isolation between channels: No
Electrical isolation between channel and internal bus: Yes
Fuse protection (short circuit): Internal electronic fuse per module

Santa Clara Systems specializes in hard-to-find parts. Choose from our overstock inventory and save on CPX-E-4AO-U-I . Santa Clara Systems carries 9,904 items from Festo.

We are in the process of adding data and downloadable material for this item. Please search similar items for more information related to this product.