NEBA-M8G3-U-2.5-N-M8G3

Festo - Connecting Cable

Current response time:

By 5AM PT on Thursday

Emergency?

Description: Connecting Cable
Ambient temperature: -40 °C ... 85 °C
Conforms to standard: EN 61076-2-104 EN 61984
Certification: c UL us - Listed (OL)
Intended use: The connecting cable connects field devices (sensors, actuators) with controllers.
Explosion prevention and protection: Observe the information on the certificate Zone 2 (ATEX) Zone 22 (ATEX)
Certificate issuing authority: UL E253748
Cable designation: Without label holder
Contact durability: 100
Application note: Meets the requirements of IEC 61010-1 and 61010-2-202, in particular for electrically operated valves from Festo. Only energy-limited circuits with a maximum current of 4 A at a max. open circuit voltage of 30 VDC are permitted to be used for supplying electrically actuated valves from Festo.
Electrical connection 1, function: Field device end
Electrical connection 1, design: Round
Electrical connection 1, connection type: Socket
Electrical connection 1, cable outlet: Straight
Electrical connection 1, connection technology: M8x1 A-coded as per EN 61076-2-104
Electrical connection 1, number of pins/wires: 3
Electrical connection 1, occupied pins/wires: 3
Electrical connection 1, type of mounting: Screw-type lock with hexagon AF 9 and longitudinal knurl rotatable. Compatible with rotatable/non-rotatable screw-type lock
Electrical connection for input 1, connection pattern: 00991871
Electrical connection 1, terminal allocation: Pin 1 = BN Pin 3 = BU Pin 4 = BK
Electrical connection 1, display: Without
Electrical connection 2, function: Control side
Electrical connection 2, design: Round
Electrical connection 2, connection type: Plug
Electrical connection 2, cable outlet: Straight
Electrical connection 2, connection technology: M8x1 A-coded as per EN 61076-2-104
Electrical connection 2, number of pins/wires: 3
Electrical connection 2, occupied pins/wires: 3
Electrical connection 2, type of mounting: Screw-type lock with hexagon AF 9 and longitudinal knurl rotatable. Compatible with rotatable/non-rotatable screw-type lock
Electrical connection 2, connection pattern: 00991155
Electrical connection 2, terminal allocation: Pin 1 = BN Pin 3 = BU Pin 4 = BK
Electrical connection 2, display: Without
DC operating voltage range: 0 V ... 60 V
Note on operating voltage range DC: 0 - 30 V for UL applications NEC/CEC CLASS 2
Operating voltage range AC: 0 V ... 48 V
Note on operating voltage range AC: 0 - 30 V for UL applications NEC/CEC CLASS 2
Current rating at 40° C: 4 A
Note on acceptable current load at 40°C: Observe derating
Surge resistance: 1.5 kV

Cable length: 2.5 m
Cable characteristic: Suitable for energy chains/robot applications abrasion-resistant low adhesion Flame-retardant and self-extinguishing
Connector cable test conditions: Test conditions on request Torsion resistance: > 300,000 cycles, ±270°/0.1 m Flexural strength: > 50000 cycles, bending radius 5 mm Energy chain: > 5 million cycles, bending radius 28 mm
Note on connector cable test conditions: Tested at 23 °C
Bending radius, fixed cable installation: ≥12 mm
Bending radius, flexible cable installation: ≥39 mm
Cable diameter: 3.8 mm
Cable design: 3 x 0.25 mm²
Nominal conductor cross section: 0.25 mm²
Degree of protection: IP65 IP68 IP69K
Note on degree of protection: In mounted state
Special features: UV-resistant hydrolysis resistant Resistant to cooling lubricants Resistant to microbes Oil-resistant Ozone-resistant
Use in exterior area: Locations of use with direct outdoor climatic exposure Class D1 based on IEC 60654-1
Note on ambient temperature: -40 - 50 °C for UL applications
Ambient temperature with flexible cable installation: -20 °C ... 85 °C
Note on ambient temperature with flexible cable installation: -20 - 50 °C for UL applications
Storage temperature: -25 °C ... 55 °C
Note on storage temperature: Short-term for transport in packaging -40 ... 85 °C
Relative air humidity: Max. 93% at 40 °C
Nominal altitude of use above sea level: <= 2000 m NHN
Overvoltage category: II
CE marking (see declaration of conformity): As per EU RoHS directive
UKCA marking (see declaration of conformity): To UK RoHS instructions
LABS (PWIS) conformity: VDMA24364-B2-L
Suitability for the production of Li-ion batteries: Suitable for battery production with reduced Cu/Zn/Ni values (F1a)
Cleanroom suitability, measured according to ISO 14644-14: Class 4 according to ISO 14644-1
Note on materials: CFC-free RoHS-compliant Cadmium-free Halogen-free Free of phosphoric acid ester
Contamination level: 3
Note on the contamination level: In mounted state
Corrosion resistance class (CRC): 1 - Low corrosion stress
Material of cable sheath: TPE-U(PUR)
Color cable sheath: Gray
Housing material: TPE-U(PUR)
Housing colour: Black
Material of screw-type lock: Die-cast zinc, nickel-plated
Seals material: FPM
Material of pin contacts: Copper alloy, gold-plated
Insulating sheath material: PP

Santa Clara Systems specializes in hard-to-find parts. Choose from our overstock inventory and save on NEBA-M8G3-U-2.5-N-M8G3 . Santa Clara Systems carries 9,543 items from Festo.

We are in the process of adding data and downloadable material for this item. Please search similar items for more information related to this product.