OVEM-10-H-B-QO-CE-N-LK

Festo - Vacuum Generator

Product Summary:

Ambient temperature: 0 °C ... 50 °C
Electrical connection: 5-pin M12x1 Plug
Nominal width of Laval nozzle: 0.95 mm
Max. vacuum: 93 %
Max. suction rate with respect to atmosphere: 19.5 l/min

Current response time:

By 5AM PT on Thursday

Emergency?

Description: Vacuum Generator
Ambient temperature: 0 °C ... 50 °C
Electrical connection: 5-pin M12x1 Plug
Nominal width of Laval nozzle: 0.95 mm
Max. vacuum: 93 %
Max. suction rate with respect to atmosphere: 19.5 l/min
Width dimension: 20 mm
Muffler construction type: Open
Mounting position: Any
Ejector characteristics: High vacuum Standard
Grade of filtration: 40 µm
Manual override: Non-detenting Additionally via operating buttons
Integrated function: Ejector pulse valve, electric Flow control Shut off valve, electric Compressed air filter Air saving function, electrical Non-return valve Pneumatic muffler open Vacuum switch
Structural design: Modular
Short-circuit protection: Yes
Measured variable: Relative pressure
Measuring principle: Piezoresistive
Switching element function: N/C contact N/O contact
Switching function: Window comparator Threshold value comparator
Symbol: 00992094
Valve function: Closed
Reverse polarity protection: For all electrical connections
Switching input to standard: IEC 61131-2
Display type: 4-character alphanumeric Back-lit LCD
Display range: -0.999 bar ... 0 bar
Displayable unit(s): Bar
Setting range hysteresis: -0.9 bar ... 0 bar
Setting options: IO-Link® Via display and pushbuttons
Switching position indication: LCD
Switching status indication: Optical
Setting range threshold value: -0.999 bar ... 0 bar
Operating pressure: 2 bar ... 8 bar
Operating pressure for max. vacuum: 3.5 bar
Nominal operating pressure: 6 bar
Air supply time at nominal operating pressure: 0.2 s
DC operating voltage range: 20.4 V ... 27.6 V
Duty cycle: 100%
Insulation voltage: 50 V
Max. output current: 100 mA
Residual current: 0.1 mA
Switching output: 2xPNP
Voltage drop: ≤1.8 V
Coil characteristics: 24 V DC: low-current phase 0.3 W, high-current phase 2.55 W
Surge resistance: 0.8 kV
Overload protection: Available
Contamination level: 3
Certification: RCM compliance mark c UL us - Listed (OL)
KC characters: KC EMC

CE marking (see declaration of conformity): As per EU EMC directive
UKCA marking (see declaration of conformity): To UK instructions for EMC
Operating medium: Compressed air as per ISO 8573-1:2010 [7:4:4]
Information on operating and pilot media: Operation with oil lubrication not possible
Corrosion resistance class (CRC): 2 - Moderate corrosion stress
LABS (PWIS) conformity: VDMA24364 zone III
Temperature of medium: 0 °C ... 50 °C
Relative air humidity: 5 - 85 %
Noise level at nominal operating pressure: 73 dB(A)
Degree of protection: IP65
Protection class: III
Max. tightening torque: 0.8 Nm with internal thread 2.5 Nm with through-hole
Product weight: 330 g
Pressure measuring range: -1 bar ... 0 bar
Accuracy in ± % FS: 3 %FS
Reproducibility, switching value FS: 0.6 %
Protocol: IO-Link®
IO-Link®, protocol version: Device V 1.1
IO-Link®, profile: Smart sensor profile
IO-Link®, function classes: Binary data channel (BDC) Process data variable (PDV) Identification Diagnostics Teach channel
IO-Link®, communication mode: COM2 (38,4 kBd)
IO-Link®, port class: A
IO-Link®, process data width OUT: 1 Byte
IO-Link®, process data content OUT: 1 bit (ejector pulse ON/OFF) 1 bit (vacuum ON/OFF)
IO-Link®, process data width IN: 2 Byte
IO-Link®, process data content IN: 14 bit PDV (pressure measurement) 2 bit BDC (pressure monitoring)
IO-Link®, minimum cycle time: 3.5 ms
IO-Link®, data memory required: 500 byte
IO-Link®, device ID: 0x00003E
Protection against tampering: Electronic interlock
Type of mounting: With through-hole With internal thread With accessories
Pneumatic connection 1: QS-8
Pneumatic connection 3: QS-8
Vacuum connection: QS-8
Seals material: NBR
Female nozzle material: POM
Compressed air filter material: Fabric PA Sintered steel
Housing material: Die-cast aluminum PA-reinforced
Material of adjusting screw: Steel
Muffler material: Wrought aluminum alloy PU foam
Material of screws: Steel
Inspection window material: PA
Material of plug housing: Brass, nickel-plated
Material of pin contacts: Brass, gold-plated
Material of pins: Steel
Material of jet nozzle: Wrought aluminum alloy
Material of keypad: TPE-U
Material of pneumatic fitting: Brass, nickel-plated

Santa Clara Systems specializes in hard-to-find parts. Choose from our overstock inventory and save on OVEM-10-H-B-QO-CE-N-LK . Santa Clara Systems carries 9,904 items from Festo.

We are in the process of adding data and downloadable material for this item. Please search similar items for more information related to this product.