ATV32H018M2

Telemecanique - variable speed drive ATV32 - 0,18 kw - 200 V - 1 phase - with heat sink

Current response time:

8 Minutes 48 Seconds

*Santa Clara Systems is not a Telemecanique Authorized Distributor.

Description: variable speed drive ATV32 - 0,18 kw - 200 V - 1 phase - with heat sink
Product weight: 5.29 lb(US) (2.4 kg)
Range of product: Altivar 32
IP degree of protection: IP20 EN/IEC 61800-5-1
Standards: EN 61800-3 environments 1 category C2EN 55011 class A group 1EN 61800-3 environments 2 category C2EN/IEC 61800-3EN/IEC 61800-5-1
Width: 1.77 in (45 mm)
Height: 12.8 in (325 mm)
Depth: 9.65 in (245 mm)
Operating altitude: <= 3280.84 ft. (1000 m) without derating3280.84...6561.68 ft. (1000...2000 m) with current derating 1 % per 100 m
Tightening torque: 4.42 lbf.in (0.5 N.m) 4.4 lb/ft. control6.19 lbf.in (0.7 N.m) 7.1 lb/ft. motor/braking resistor5.31 lbf.in (0.6 N.m) 5.3 lb/ft. power supply
Vibration resistance: 1 gn 13...200 Hz EN/IEC 60068-2-61.5 mm peak to peak 3...13 Hz EN/IEC 60068-2-6
Shock resistance: 15 gn 11 ms EN/IEC 60068-2-27
Electrical connection: Screw terminal 0.5...1.5 mm² AWG 18...AWG 14 controlRemovable screw terminals 1.5...2.5 mm² AWG 14...AWG 12 motor/braking resistorScrew terminal 1.5...4 mm² AWG 14...AWG 10 power supply
motor power kW: 0.18 kW 200...240 V
[Us] rated supply voltage: 200...240 V - 15...10 %
Relative humidity: 5...95 % without condensation IEC 60068-2-35...95 % without dripping water IEC 60068-2-3
Protection type: Input phase breaks driveOvercurrent between output phases and earth driveOverheating protection driveShort-circuit between motor phases driveThermal protection drive
Response time: 8 ms +/- 0.7 ms LI1...LI6 logic2 ms R1A, R1B, R1C relay2 ms R2A, R2C relay
Switching frequency: 2...16 kHz adjustable
Line current: 2.8 A 240 V 1 phase 0.18 kW 0.25 hp3.4 A 200 V 1 phase 0.18 kW 0.25 hp
Product or component type: Variable speed drive
Apparent power: 0.7 kVA 240 V 1 phase 0.18 kW 0.25 hp
Product certifications: ULNOM 117CSAGOSTC-Tick
Product destination: Asynchronous motorsSynchronous motors
prospective line Isc: <= 1 kA 1 phase
Marking: CE
Product specific application: Complex machines
Nominal output current: 1.5 A 4 kHz 240 V 0.18 kW 0.25 hp
Pollution degree: 2 EN/IEC 61800-5-1
Function available: -
Maximum transient current: 2.3 A 60 s 0.18 kW 0.25 hp
Assembly style: With heat sink
Output frequency: 0.0005...0.599 kHz
Component name: ATV32
Nominal switching frequency: 4 kHz
EMC filter: Class C2 EMC filter integrated
Phase: 1 phase
Speed range: 1...100 asynchronous motor in open-loop mode
Ambient air temperature for operation: 14...122 °F (-10...50 °C) without derating122...140 °F (50...60 °C) with derating factor
Speed accuracy: +/- 10 % of nominal slip 0.2 Tn to Tn
Ambient air temperature for storage: -13...158 °F (-25...70 °C)
Supply voltage limits: 170...264 V

Torque accuracy: +/- 15 %
Supply frequency: 50...60 Hz - 5...5 %
Transient overtorque: 170...200 %
Operating position: Vertical +/- 10 degree
Network frequency: 47.5...63 Hz
Braking torque: <= 170 % with braking resistor
Asynchronous motor control profile: Voltage/frequency ratio, 5 pointsFlux vector control without sensor - Energy Saving, NoLoad lawVoltage/frequency ratio - Energy Saving, quadratic U/fVoltage/frequency ratio, 2 pointsFlux vector control without sensor, standard
Motor power hp: 0.25 hp 200...240 V
Synchronous motor control profile: Vector control without sensor
Regulation loop: Adjustable PID regulator
Motor slip compensation: Adjustable 0...300 %Not available in voltage/frequency ratio (2 or 5 points)Automatic whatever the load
Local signaling: 1 LED green CANopen run1 LED red CANopen error1 LED red drive fault1 LED red drive voltage
Output voltage: <= power supply voltage
Noise level: 43 dB 86/188/EEC
Insulation: Electrical between power and control
Supply: Internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 % <= 10 mA overload and short-circuit protection
Analogue input number: 3
Analogue input type: Voltage AI1 0...10 V DC 30000 Ohm 10 bitsBipolar differential voltage AI2 +/- 10 V DC 30000 Ohm 10 bitsCurrent AI3 0...20 mA (or 4-20 mA, x-20 mA, 20-x mA or other patterns by configuration) 250 Ohm 10 bits
Sampling duration: 2 ms AI1, AI2, AI3 analog2 ms AO1 analog
Accuracy: +/- 0.2 % AI1, AI2, AI3 for a temperature of -10...60 °C+/- 0.5 % AI1, AI2, AI3 for a temperature of 25 °C+/- 1 % AO1 for a temperature of 25 °C+/- 2 % AO1 for a temperature of -10...60 °C
Linearity error: +/- 0.2...0.5 % of maximum value AI1, AI2, AI3+/- 0.3 % AO1
Analogue output number: 1
Analogue output type: Software-configurable current AO1 0...20 mA 800 Ohm 10 bitsSoftware-configurable voltage AO1 0...10 V 470 Ohm 10 bits
Discrete output number: 3
Discrete output type: Configurable relay logic R1A, R1B, R1C NO/NC 100000 cyclesConfigurable relay logic R2A, R2B NO 100000 cyclesLogic LO
Minimum switching current: 5 mA 24 V DC configurable relay logic
Maximum switching current: 3 A 250 V AC resistive (cos phi = 1 R14 A 30 V DC resistive (cos phi = 1 R12 A 250 V AC inductive (cos phi = 0.4 R1, R22 A 30 V DC inductive (cos phi = 0.4 R1, R25 A 250 V AC resistive (cos phi = 1 R25 A 30 V DC resistive (cos phi = 1 R2
Discrete input number: 7
Discrete input type: Programmable (sink/source) LI1...LI4 24...30 V DC level 1 PLCProgrammable as pulse input 20 kpps LI5 24...30 V DC level 1 PLCSwitch-configurable PTC probe LI6 24...30 V DCSafe torque off STO 24...30 V DC 1500 Ohm
Discrete input logic: Negative logic (sink) LI1...LI6 > 19 V < 13 VPositive logic (source) LI1...LI6 < 5 V > 11 V
Acceleration and deceleration ramps: Ramp switchingUCUSSDeceleration ramp automatic stop DC injectionDeceleration ramp adaptationLinear
Braking to standstill: By DC injection
Communication port protocol: CANopenModbus
Connector type: 1 RJ45 Modbus/CANopen on front face
Physical interface: 2-wire RS 485 Modbus
Transmission frame: RTU Modbus
Type of polarization: No impedance Modbus
Number of addresses: 1...247 Modbus1...127 CANopen
Method of access: Slave CANopen
Electromagnetic compatibility: Conducted radio-frequency immunity test level 3 IEC 61000-4-6Voltage dips and interruptions immunity test IEC 61000-4-111.2/50 µs - 8/20 µs surge immunity test level 3 IEC 61000-4-5Electrical fast transient/burst immunity test level 4 IEC 61000-4-4Electrostatic discharge immunity test level 3 IEC 61000-4-2Radiated radio-frequency electromagnetic field immunity test level 3 IEC 61000-4-3
Option card: Communication card CANopen daisy chainCommunication card CANopen open styleCommunication card DeviceNetCommunication card Ethernet/IPCommunication card Profibus DP V1

Santa Clara Systems specializes in hard-to-find parts. Choose from our overstock inventory and save on ATV32H018M2 . Santa Clara Systems carries 10,431 items from Telemecanique.