Out of Stock

STBNIB2212

Telemecanique - standard Network Interface Module STB - Interbus - 500 kbit/s

Current response time:

5 Minutes 19 Seconds

*Santa Clara Systems is not a Telemecanique Authorized Distributor.

Description: standard Network Interface Module STB - Interbus - 500 kbit/s
Product weight: 0.34 lb(US) (0.155 kg)
Range of product: Modicon STB distributed I/O solution
IP degree of protection: IP20 conforming to EN 61131-2 class 1
Width: 5.05 in (128.3 mm)
Height: 1.57 in (40 mm)
Depth: 2.76 in (70 mm)
Operating altitude: <= 6561.68 ft. (2000 m)
Vibration resistance: +/-0.35 mm (f = 10...58 Hz)5 gn (f = 58...150 Hz) on 35 x 15 mm symmetrical DIN rail3 gn (f = 58...150 Hz) on 35 x 7.5 mm symmetrical DIN rail
Shock resistance: 30 gn 11 ms conforming to IEC 88 reference 2-27
[Us] rated supply voltage: 24 V DC
Overvoltage category: II
Relative humidity: 95 % at 140 °F (60 °C) without condensation
number of addressable I/O module: 0...32 per island
Electromagnetic compatibility: Immunity to electromagnetic interference conforming to IEC 61131-2
Product or component type: Standard Network Interface Module
Communication service: Logical addressingDiagnosticsImplicit exchange of process data
Product certifications: CSAATEX Cat 3GULC-TickFM Class 1 Division 2

Integrated connection type: Interbus conforming to InterBus Club 9-way female isolated RS485 SUB-D 1 twisted shielded pair (output bus)Interbus conforming to InterBus Club HE-13 (RS232 port)Interbus conforming to InterBus Club 8-way female (RS232 port)Interbus conforming to InterBus Club 9-way male isolated RS485 SUB-D 1 twisted shielded pair (input bus)
Pollution degree: 2 conforming to IEC 60664-1
Number of segments: 1 primary, maximum 6 extensions
Power supply type: SELV
Number of slave: 512
Supply current: >= 700 mA
Transmission rate: 500 kbit/s for bus length of 0...1312.34 ft. (0...400 m) per bus segment between stations500 kbit/s for bus length of 0...164.04 ft. (0...50 m) for the installation bus500 kbit/s for bus length of 0...41994.75 ft. (0...12800 m) for the bus between stations
Supply voltage limits: 19.2...30 V
Ambient air temperature for operation: 32...140 °F (0...60 °C) without derating-13...158 °F (-25...70 °C) with derating factor
Structure type: Industrial field bus (Generation4)
Input current: 430 mA for supply circuit
Ambient air temperature for storage: -40...185 °F (-40...85 °C)
Nominal output current: 1.2 A0.575 A (140...158 °F (60...70 °C))
Output impedance: <= 0.05 Ohm at 100000 kHz
Output voltage: 5.25 V DC (tolerance: +/- 0.21 %) logic bus
Marking: CE
status LED: 1 LED red module error (ERR)1 LED green island state (RUN)1 LED green power supply (PWR)1 LED yellow test mode1 LED green BA1 LED green RC1 LED red RD

Santa Clara Systems specializes in hard-to-find parts. Choose from our overstock inventory and save on STBNIB2212 . Santa Clara Systems carries 10,431 items from Telemecanique.