STBNIC2212

Telemecanique - Network Interface Module

Product Summary:

Product weight: 0.32 lb(US) (0.145 kg)
Range of product: Modicon STB distributed I/O solution
IP degree of protection: IP20 conforming to EN 61131-2 class 1
Width: 5.05 in (128.3 mm)
Height: 1.57 in (40 mm)

Current response time:

13 Minutes 29 Seconds

*Santa Clara Systems is not a Telemecanique Authorized Distributor.

Description: Network Interface Module
Product weight: 0.32 lb(US) (0.145 kg)
Range of product: Modicon STB distributed I/O solution
IP degree of protection: IP20 conforming to EN 61131-2 class 1
Standards: FM Class 1 division 2, groups A, B, C and D T4A with 70 °CIEC 61131-2 : 2003
Width: 5.05 in (128.3 mm)
Height: 1.57 in (40 mm)
Depth: 2.76 in (70 mm)
Operating altitude: <= 6561.68 ft. (2000 m)
Vibration resistance: +/-0.35 mm (f = 10...58 Hz)5 gn (f = 58...150 Hz) on 35 x 15 mm symmetrical DIN rail3 gn (f = 58...150 Hz) on 35 x 7.5 mm symmetrical DIN rail
Shock resistance: 30 gn 11 ms conforming to IEC 88 reference 2-27
[Us] rated supply voltage: 24 V DC
Overvoltage category: II
Relative humidity: 95 % at 140 °F (60 °C) without condensation
number of addressable I/O module: 0...32 per island
Product or component type: Standard Network Interface Module
Communication service: SNMP agentBootP/DHCP protocolEmbedded web (configuration, diagnostics and access to variable)
Product certifications: ULCSAC-TickODVA

Integrated connection type: Ethernet/IP conforming to IEEE 802.3 female RJ45 double shielded twisted pair via Ethernet (network)Ethernet/IP conforming to IEEE 802.3 HE-13 (RS232 port)Ethernet/IP conforming to IEEE 802.3 8-way female (RS232 port)
Pollution degree: 2 conforming to IEC 60664-1
port Ethernet: 10BASE-T/100BASE-T
Power supply type: SELV
Exchange mode: Half or full duplex
Supply current: >= 700 mA
Number of segments: 1 primary, maximum 6 extensions
Supply voltage limits: 19.2...30 V
Ambient air temperature for operation: 32...140 °F (0...60 °C) without derating-13...158 °F (-25...70 °C) with derating factor
Number of devices per segment: 0...256
Input current: 430 mA for supply circuit
Ambient air temperature for storage: -40...185 °F (-40...85 °C)
Transmission rate: 10/100 Mbit/s
Nominal output current: 1.2 A0.575 A (140...158 °F (60...70 °C))
Output voltage: 5.25 V DC (tolerance: +/- 0.21 %) logic bus
Marking: CE
status LED: 1 LED island state (RUN)1 LED power supply (PWR)1 LED module error (ERR)1 LED ACT1 LED MS1 LED NS1 LED test mode (TEST)

Santa Clara Systems specializes in hard-to-find parts. Choose from our overstock inventory and save on STBNIC2212 . Santa Clara Systems carries 10,643 items from Telemecanique.