Out of Stock

TSXCTY2C

Telemecanique - 2 channels measurement and counter module - 15 mA at 24 V DC, 850 mA at 5 V DC

Product Summary:

Product weight: 0.75 lb(US) (0.34 kg)
Range of product: Modicon Premium Automation platform
Protective treatment: TC
Operating altitude: <= 6561.68 ft. (2000 m)
Electrical connection: 1 connector HE-10 20 pins2 connectors SUB-D 15

Current response time:

7 Minutes 56 Seconds

*Santa Clara Systems is not a Telemecanique Authorized Distributor.

Description: 2 channels measurement and counter module - 15 mA at 24 V DC, 850 mA at 5 V DC
Product weight: 0.75 lb(US) (0.34 kg)
Range of product: Modicon Premium Automation platform
Protective treatment: TC
Operating altitude: <= 6561.68 ft. (2000 m)
Electrical connection: 1 connector HE-10 20 pins2 connectors SUB-D 15
Relative humidity: 5...95 % without condensation
Response time: < 10 ms sensor voltage at return of 24 V auxiliary input (preset, enable and read)< 2.5 ms sensor voltage at loss of 24 V auxiliary input (preset, enable and read)
Switching frequency: < 0.6/LI² Hz on inductive load
Input voltage: 24 V 16 mA 2/3-wire proximity sensors PNP/NPN24 V 8 mA auxiliary input (preset, enable and read)5 V 18 mA encoder input
Counting frequency: 1000000 Hz
Product or component type: Measurement and counter module
Incremental encoder frequency x1: 500 kHz
Ambient air temperature for operation: 32...140 °F (0...60 °C)
I/O modularity: 2 channels
Incremental encoder frequency x 4: 250 kHz
Ambient air temperature for storage: -13...158 °F (-25...70 °C)
Electrical circuit type: Auxiliary output conforming to EN/IEC 61131-2
power dissipation in W: 7...10 W
Cycle time: 1 ms
Discrete input logic: Current sink auxiliary input (preset, enable and read) conforming to IEC 1131 Type 2Resistive 2/3-wire proximity sensors PNP/NPN conforming to IEC 1131 Type 2Resistive encoder input
Input logic: Positive

Input compatibility: Absolute encoder SSI serial outputIncremental encoder 10...30 V totem poleIncremental encoder 5 V DC RS422Absolute encoder parallel output ABE7CPA11
Input voltage limits: <= 5.5 V encoder input19...30 V 2/3-wire proximity sensors PNP/NPN19...30 V auxiliary input (preset, enable and read)
Voltage state 1 guaranteed: >= 11 V 2/3-wire proximity sensors PNP/NPN>= 11 V auxiliary input (preset, enable and read)>= 2.4 V encoder input
Current state 1 guaranteed: >= 6 mA 2/3-wire proximity sensors PNP/NPN>= 6 mA auxiliary input (preset, enable and read)>= 3.6 mA encoder input
Voltage state 0 guaranteed: <= 1.2 V encoder input<= 5 V 2/3-wire proximity sensors PNP/NPN<= 5 V auxiliary input (preset, enable and read)
Current state 0 guaranteed: <= 1 mA encoder input<= 2 mA 2/3-wire proximity sensors PNP/NPN<= 2 mA auxiliary input (preset, enable and read)
Input impedance: > 270 Ohm at U = 2.4 V encoder input1500 Ohm at Un 2/3-wire proximity sensors PNP/NPN3400 Ohm at Un auxiliary input (preset, enable and read)400 Ohm at Un encoder input
Output voltage: 24 V DC
Nominal output current: 0.5 A
Output voltage limits: 19...30 V
Voltage drop: < 0.5 V at state 1
Output compatibility: Positive logic DC inputs (resistance <= 15 kOhm) auxiliary output
Leakage current: < 0.1 mA
Switching time: < 250 ms
Output overload protection: Current limiterThermal tripping via program or automatically
Output short-circuit protection: Current limiterThermal tripping via program or automatically
Output overvoltage protection: Zener diode
Reverse polarity protection: Reverse diode on supply
Checks: Sensor power supply
Current consumption: 15 mA 24 V DC850 mA 5 V DC
Module format: Standard
Local signaling: 2 LEDs green axis diagnostics available (CH.)1 LED green module operating (RUN)1 LED red external fault (I/O)1 LED red internal fault, module failure (ERR)

Santa Clara Systems specializes in hard-to-find parts. Choose from our overstock inventory and save on TSXCTY2C . Santa Clara Systems carries 10,643 items from Telemecanique.