Out of Stock

XPSVNE1142P

Telemecanique - Zero Speed Detection

Product Summary:

Product weight: 1.1 lb(US) (0.5 kg)
Range of product: Preventa Safety automation
Standards: EN/IEC 60947-5-1EN/IEC 60204-1
Width: 1.77 in (45 mm)
Height: 3.9 in (99 mm)

Current response time:

13 Minutes 38 Seconds

*Santa Clara Systems is not a Telemecanique Authorized Distributor.

Description: Zero Speed Detection
Product weight: 1.1 lb(US) (0.5 kg)
Range of product: Preventa Safety automation
IP degree of protection: IP20(terminals) conforming to EN/IEC 60529IP40(enclosure) conforming to EN/IEC 60529
Standards: EN/IEC 60947-5-1EN/IEC 60204-1
Width: 1.77 in (45 mm)
Height: 3.9 in (99 mm)
Depth: 4.49 in (114 mm)
[Ui] rated insulation voltage: 300 V, degree of pollution 2 conforming to IEC 60947-5-1300 V, degree of pollution 2 conforming to DIN VDE 0110 parts 1 and 2
[Uimp] rated impulse withstand voltage: 4 kV overvoltage category III, conforming to IEC 60947-5-14 kV overvoltage category III, conforming to DIN VDE 0110 parts 1 and 2
Connections - terminals: Captive screw clamp terminals, removable terminal block flexible cable: 0.2...1.5 mm² without cable end, 2 wiresCaptive screw clamp terminals, removable terminal block flexible cable: 0.2...2.5 mm² without cable end, 1 wireCaptive screw clamp terminals, removable terminal block flexible cable: 0.25...1 mm² with cable end, without bezel, 2 wiresCaptive screw clamp terminals, removable terminal block flexible cable: 0.25...2.5 mm² with cable end, with bezel, 1 wireCaptive screw clamp terminals, removable terminal block flexible cable: 0.25...2.5 mm² with cable end, without bezel, 1 wireCaptive screw clamp terminals, removable terminal block flexible cable: 0.5...1.5 mm² with cable end, with double bezel, 2 wiresCaptive screw clamp terminals, removable terminal block solid cable: 0.2...1 mm² without cable end, 2 wiresCaptive screw clamp terminals, removable terminal block solid cable: 0.2...2.5 mm² without cable end, 1 wire
Mounting support: 35 mm symmetrical DIN rail
[Ith] conventional free air thermal current: <= 2.5 A for relay output
[Us] rated supply voltage: 24 V DC (- 15...10 %)
Associated fuse rating: 4 A gG relay output conforming to EN/IEC 60947-5-1, DIN VDE 0660 part 200
Breaking capacity: 10 mA/48 V for solid state output circuit20 mA / 24 V solid state output circuit1.5 A/24 V - L/R = 50 ms, DC-13 for NO relay output circuit1.2 A/24 V - L/R = 50 ms, DC-13 for NC relay output circuit
Output type: Relay 1 NO + 1 NC, volt-free

Input voltage: 500 Vrms
Product destination: For motor power supply <= 60 Hz
Product or component type: Preventa safety module
power consumption in W: <= 3.5 W
Product certifications: CSAULTÜV
Safety module name: XPSVNE
Safety module application: For zero speed detection
Input detection threshold: 0.01...0.1 V
Ambient air temperature for operation: 14...131 °F (-10...55 °C)
Function of module: Monitoring 3-phase motor with variable number of poles and star-delta startingMonitoring 3-phase motor with star-delta startingMonitoring dc motorMonitoring star-delta motor starter and guard switch type XCS EMonitoring 3-phase motorMonitoring XPS AKMonitoring 3-phase motor + variable speed drive
Ambient air temperature for storage: -13...185 °F (-25...85 °C)
Safety level: Can reach PL d/category 3 conforming to EN/ISO 13849-1Can reach SILCL 2 conforming to EN/IEC 62061
Safety reliability data: MTTFd = 124.1 years conforming to EN/ISO 13849-1DC > 99 % conforming to EN/ISO 13849-1PFHd = 9.26E-9 1/h conforming to EN/IEC 62061
Minimum output current: 10 mA relay output
Number of additional circuits: 2 solid state outputs
Minimum output voltage: 17 V relay output
Local signalling: 4 LEDs

Santa Clara Systems specializes in hard-to-find parts. Choose from our overstock inventory and save on XPSVNE1142P . Santa Clara Systems carries 10,643 items from Telemecanique.