• Telemecanique ATV71HU22N4 variable speed drive ATV71 - 2.2kW-3HP - 480V - EMC filter-graphic terminal Product Image
  • Telemecanique ATV71HU22N4 variable speed drive ATV71 - 2.2kW-3HP - 480V - EMC filter-graphic terminal Product Image
  • Telemecanique ATV71HU22N4 variable speed drive ATV71 - 2.2kW-3HP - 480V - EMC filter-graphic terminal Product Image
  • Telemecanique ATV71HU22N4 variable speed drive ATV71 - 2.2kW-3HP - 480V - EMC filter-graphic terminal Product Image
  • Telemecanique ATV71HU22N4 Barcode

ATV71HU22N4

Get a Quote

Current response time:

10 Minutes 57 Seconds
  • Description: variable speed drive ATV71 - 2.2kW-3HP - 480V - EMC filter-graphic terminal
  • Product weight: 6.61 lb(US) (3 kg)
  • Range of product: Altivar 71
  • IP degree of protection: IP20
  • Standards: EN 61800-3 environments 1 category C2, EN/IEC 61800-5-1, IEC 60721-3-3 class 3S2, EN 61800-3 environments 2 category C2, UL Type 1, EN 55011 class A group 1, EN/IEC 61800-3, IEC 60721-3-3 class 3C1
  • Width: 5.12 in (130 mm)
  • Height: 9.06 in (230 mm)
  • Depth: 6.89 in (175 mm)
  • Operating altitude: <= 3280.84 ft. (1000 m) without derating, 3280.84...9842.52 ft. (1000...3000 m) with current derating 1 % per 100 m
  • Tightening torque: AI1-/AI1+, AI2, AO1, R1A, R1B, R1C, R2A, R2B, LI1...LI6, PWR 5.31 lbf.in (0.6 N.m), L1/R, L2/S, L3/T, U/T1, V/T2, W/T3, PC/-, PO, PA/+, PA, PB 12.39 lbf.in (1.4 N.m) / 12.3 lb.in
  • Vibration resistance: 1.5 mm peak to peak (f = 3...13 Hz) conforming to EN/IEC 60068-2-6, 1 gn (f = 13...200 Hz) conforming to EN/IEC 60068-2-6
  • Shock resistance: 15 gn 11 ms conforming to EN/IEC 60068-2-27
  • Electrical connection: AI1-/AI1+, AI2, AO1, R1A, R1B, R1C, R2A, R2B, LI1...LI6, PWR terminal 2.5 mm / AWG 14, L1/R, L2/S, L3/T, U/T1, V/T2, W/T3, PC/-, PO, PA/+, PA, PB terminal 4 mm / AWG 10
  • Insulation resistance: > 1 mOhm at 500 V DC for 1 minute to earth
  • motor power kW: 2.2 kWat 380...480 V 3 phases
  • [Us] rated supply voltage: 380...480 V (- 15...10 %)
  • Relative humidity: 5...95 % without condensation conforming to IEC 60068-2-3, 5...95 % without dripping water conforming to IEC 60068-2-3
  • Protection type: Drive against exceeding limit speed, Drive against input phase loss, Drive break on the control circuit, Drive input phase breaks, Drive line supply overvoltage, Drive line supply undervoltage, Drive overcurrent between output phases and earth, Drive overheating protection, Drive overvoltages on the DC bus, Drive short-circuit between motor phases, Drive thermal protection, Motor motor phase break, Motor power removal, Motor thermal protection
  • Response time: <= 100 ms in STO (Safe Torque Off), AO1 2 ms, tolerance +/- 0.5 ms analog output(s), R1A, R1B, R1C 7 ms, tolerance +/- 0.5 ms discrete output(s), R2A, R2B 7 ms, tolerance +/- 0.5 ms discrete output(s)
  • Switching frequency: 1...16 kHz adjustable, 4...16 kHz with derating factor
  • Product destination: Synchronous motors, Asynchronous motors
  • Noise level: 43 dB conforming to 86/188/EEC
  • Product or component type: Variable speed drive
  • Supply voltage limits: 323...528 V
  • Dielectric strength: 3535 V DC between earth and power terminals, 5092 V DC between control and power terminals
  • Product specific application: Complex, high-power machines
  • Supply frequency: 50...60 Hz (- 5...5 %)
  • Electromagnetic compatibility: Conducted radio-frequency immunity test conforming to IEC 61000-4-6 level 3, Electrical fast transient/burst immunity test conforming to IEC 61000-4-4 level 4, Electrostatic discharge immunity test conforming to IEC 61000-4-2 level 3, Radiated radio-frequency electromagnetic field immunity test conforming to IEC 61000-4-3 level 3, Voltage dips and interruptions immunity test conforming to IEC 61000-4-11, 1.2/50 s - 8/20 s surge immunity test conforming to IEC 61000-4-5 level 3
  • Component name: ATV71
  • Network frequency: 47.5...63 Hz
  • Speed range: 1...100 asynchronous motor in open-loop mode, without speed feedback, 1...50 synchronous motor in open-loop mode, without speed feedback, 1...1000 asynchronous motor in closed-loop mode with encoder feedback
  • Product certifications: UL, CSA, NOM 117, GOST, C-Tick
  • Motor power hp: 3 hpat 380...480 V 3 phases
  • Speed accuracy: +/- 0.01 % of nominal speed 0.2 Tn to Tn torque variation in closed-loop mode with encoder feedback, +/- 10 % of nominal slip 0.2 Tn to Tn torque variation without speed feedback
  • Pollution degree: 2 conforming to EN/IEC 61800-5-1
  • Motor cable length: <= 164.04 ft. (50 m) Shielded cable, <= 328.08 ft. (100 m) Unshielded cable
  • Torque accuracy: +/- 15 % in open-loop mode, without speed feedback, +/- 5 % in closed-loop mode with encoder feedback
  • Transient overtorque: 220 % of nominal motor torque +/- 10 %for 2 s, 170 % of nominal motor torque +/- 10 %for 60 s every 10 minutes
  • Phase: 3 phases
  • Braking torque: <= 150 % with braking or hoist resistor, 30 % without braking resistor
  • Line current: 7.1 Afor 480 V 3 phases 2.2 kW / 3 hp, 8.2 Afor 380 V 3 phases 2.2 kW / 3 hp
  • Synchronous motor control profile: Vector control without speed feedback
  • EMC filter: Integrated
  • Regulation loop: Adjustable PI regulator
  • Ambient air temperature for operation: 14...122 F (-10...50 C) without derating
  • Assembly style: With heat sink
  • Motor slip compensation: Adjustable, Not available in voltage/frequency ratio (2 or 5 points), Automatic whatever the load, Suppressible
  • Ambient air temperature for storage: -13...158 F (-25...70 C)
  • Apparent power: 5.4 kVAat 380 V 3 phases 2.2 kW / 3 hp
  • Local signaling: 1 LED red presence of drive voltage
  • prospective line Isc: <= 5 kA, 3 phases
  • Output voltage: <= power supply voltage
  • Nominal output current: 4.8 A at 4 kHz 460 V 3 phases 2.2 kW / 3 hp, 5.8 A at 4 kHz 380 V 3 phases 2.2 kW / 3 hp
  • Insulation: Electrical between power and control
  • Maximum transient current: 8.7 Afor 60 s 3 phases 2.2 kW / 3 hp, 9.6 Afor 2 s 3 phases 2.2 kW / 3 hp
  • Type of cable: With a NEMA Type1 kit: 3-strand UL 508 cableat 104 F (40 C), copper 75 C PVC, With an IP21 or an IP31 kit: 3-strand IEC cableat 104 F (40 C), copper 70 C PVC, Without mounting kit: 1-strand IEC cableat 113 F (45 C), copper 70 C PVC, Without mounting kit: 1-strand IEC cableat 113 F (45 C), copper 90 C XLPE/EPR
  • Output frequency: 0.1...599 Hz
  • Nominal switching frequency: 4 kHz
  • Supply: Internal supply for reference potentiometer (1 to 10 kOhm), 10.5 V DC +/- 5 %, <= 10 mA for overload and short-circuit protection, Internal supply, 24 V DC, voltage limits 21...27 V, <= 200 mA for overload and short-circuit protection
  • Asynchronous motor control profile: Flux vector control (FVC) with sensor (current vector), Voltage/frequency ratio (2 or 5 points), ENA (Energy adaptation) system for unbalanced loads, Sensorless flux vector control (SFVC) (voltage or current vector)
  • Analogue input number: 2
  • Type of polarization: No impedance Modbus
  • Analogue input type: AI1-/Al1+ bipolar differential voltage +/- 10 V DC, input voltage 24 V max, resolution 11 bits + sign, AI2 software-configurable current 0...20 mA, impedance 242 Ohm, resolution 11 bits, AI2 software-configurable voltage 0...10 V DC, input voltage 24 V max, impedance 30000 Ohm, resolution 11 bits
  • Sampling duration: AI1-/Al1+ 2 ms, +/- 0.5 ms analog input(s), Al2 2 ms, +/- 0.5 ms analog input(s), LI1...LI5 2 ms, +/- 0.5 ms discrete input(s), LI6 (if configured as logic input) 2 ms, +/- 0.5 ms discrete input(s)
  • Accuracy: AI1-/Al1+ +/- 0.6 % for a temperature variation 60 C, AI2 +/- 0.6 % for a temperature variation 60 C, AO1 +/- 1 % for a temperature variation 60 C
  • Linearity error: AI1-/Al1+, AI2 +/- 0.15 % of maximum value, AO1 +/- 0.2 %
  • Analogue output number: 1
  • Analogue output type: AO1 software-configurable current 0...20 mA, impedance 500 Ohm, resolution 10 bits, AO1 software-configurable logic output 10 V <= 20 mA, AO1 software-configurable voltage 0...10 V DC, impedance 470 Ohm, resolution 10 bits
  • Discrete output number: 2
  • Discrete output type: R1A, R1B, R1C configurable relay logic NO/NC, electrical durability 100000 cycles, R2A, R2B configurable relay logic NO, electrical durability 100000 cycles
  • Minimum switching current: Configurable relay logic 3 mAat 24 V DC
  • Maximum switching current: R1, R2 on resistive load, 5 A at 250 V AC, cos phi = 1,, R1, R2 on resistive load, 5 A at 30 V DC, cos phi = 1,, R1, R2 on inductive load, 2 A at 250 V AC, cos phi = 0.4,, R1, R2 on inductive load, 2 A at 30 V DC, cos phi = 0.4,
  • Discrete input number: 7
  • Discrete input type: LI6: switch-configurable 24 V DC with level 1 PLC, impedance: 3500 Ohm, PWR: safety input 24 V DC, impedance: 1500 Ohm conforming to ISO 13849-1 level d, LI1...LI5: programmable 24 V DC with level 1 PLC, impedance: 3500 Ohm, LI6: switch-configurable PTC probe 0...6, impedance: 1500 Ohm
  • Discrete input logic: LI1...LI5 positive logic (source), < 5 V (state 0), > 11 V (state 0), LI1...LI5 negative logic (sink), > 16 V (state 0), < 10 V (state 0), LI6 (if configured as logic input) positive logic (source), < 5 V (state 0), > 11 V (state 0), LI6 (if configured as logic input) negative logic (sink), > 16 V (state 0), < 10 V (state 0)
  • Acceleration and deceleration ramps: Automatic adaptation of ramp if braking capacity exceeded, by using resistor, S, U or customized, Linear adjustable separately from 0.01 to 9000 s
  • Braking to standstill: By DC injection
  • Frequency resolution: Analog input 0.024/50 Hz, Display unit 0.1 Hz
  • Communication port protocol: CANopen, Modbus
  • Connector type: 1 RJ45 Modbus on front face, 1 RJ45 Modbus on terminal, Male SUB-D 9 on RJ45 CANopen
  • Physical interface: 2-wire RS 485 Modbus
  • Transmission frame: RTU Modbus
  • Transmission rate: 20 kbps, 50 kbps, 125 kbps, 250 kbps, 500 kbps, 1 Mbps CANopen, 4800 bps, 9600 bps, 19200 bps, 38.4 Kbps Modbus on terminal, 9600 bps, 19200 bps Modbus on front face
  • Data format: 8 bits, 1 stop, even parity Modbus on front face, 8 bits, odd even or no configurable parity Modbus on terminal
  • Number of addresses: 1...247 Modbus, 1...127 CANopen
  • Method of access: Slave CANopen
  • Marking: CE
  • Operating position: Vertical +/- 10 degree
  • Functionality: Full
  • Specific application: Other applications
  • Option card: CC-Link communication card, Controller inside programmable card, DeviceNet communication card, Ethernet/IP communication card, Fipio communication card, I/O extension card, Interbus-S communication card, Interface card for encoder, Modbus Plus communication card, Modbus TCP communication card, Modbus/Uni-Telway communication card, Overhead crane card, Profibus DP communication card, Profibus DP V1 communication card
Santa Clara Systems specializes in hard-to-find parts. Choose from our overstock inventory and save on ATV71HU22N4 . Santa Clara Systems carries 10,296 items from Telemecanique.
  • Variable Speed Drive Atv71 - 2.2kw-3hp - 480v - Emc Filter-Graphic Terminal

Alternates

    Common Typos

    • ATV71HU2ZN4
    • ATV71HUZ2N4
    • ATV71HUZZN4
    • ATV7IHU22N4
    • ATV7IHU2ZN4
    • ATV7IHUZ2N4
    • ATV7IHUZZN4
    • ATV7LHU22N4
    • ATV7LHU2ZN4
    • ATV7LHUZ2N4
    • ATV7LHUZZN4

    Appended Numbers

    • ATV71HU22N4-A
    • ATV71HU22N4-B
    • ATV71HU22N4-C
    • ATV71HU22N4-D
    • ATV71HU22N4-E
    • ATV71HU22N4-F
    • ATV71HU22N4-G
    • ATV71HU22N4-H
    • ATV71HU22N4-I
    • ATV71HU22N4-J
    • ATV71HU22N4-K
    • ATV71HU22N4-L
    • ATV71HU22N4-M
    • ATV71HU22N4-N
    • ATV71HU22N4-O
    • ATV71HU22N4-P
    • ATV71HU22N4-Q
    • ATV71HU22N4-R
    • ATV71HU22N4-S
    • ATV71HU22N4-T
    • ATV71HU22N4-U
    • ATV71HU22N4-V
    • ATV71HU22N4-W
    • ATV71HU22N4-X
    • ATV71HU22N4-Y
    • ATV71HU22N4-Z

    Customers Are Also Buying

    We Deliver!

    Late West Coast Shipping Hours
    Late West Coast Shipping (5PM PST)
    Drop-Ship and Blind-Ship Specialists
    Expertly Packed Static-Limited
    Same-Day Service
    In-House Courier
    visa credit card logo mastercard credit card logo discover credit card logo american express credit card logo

    Customers we work with

    3M logo
    Kaiser Permanente logo
    Safeway Logo
    Georgia-Pacific logo
    Coca Cola logo
    duke energy logo
    BART logo
    Pepsi logo
    LA DWP logo
    US Navy logo
    Dean Foods logo
    ConAgra Brands logo