ATV21HD11N4

Telemecanique - variable speed drive - ATV21 - 11kW 15HP - 480V - EMC filter class A - IP20

Current response time:

By 5AM PT on Wednesday

Emergency?

*Santa Clara Systems is not a Telemecanique Authorized Distributor.

Description: variable speed drive - ATV21 - 11kW 15HP - 480V - EMC filter class A - IP20
Product weight: 16.53 lb(US) (7.5 kg)
Range of product: Altivar 212
IP degree of protection: IP55
Standards: IEC 61800-3 environments 2 category C2IEC 61800-3 category C1IEC 61800-3 environments 2 category C1IEC 61800-3EN 55011 group 1 class BIEC 61800-3 environments 1 category C1IEC 61800-3 environments 1 category C2EN 61800-3 environments 2 category C1IEC 61800-3 environments 1 category C3EN 61800-3 environments 2 category C3IEC 61800-3 environments 2 category C3EN 61800-3 environments 2 category C2EN 61800-5-1EN 61800-3 environments 1 category C2EN 61800-3 environments 1 category C1EN 61800-3 environments 1 category C3EN 61800-3IEC 61800-5-1EN 61800-3 category C1
Device short name: ATV212
Width: 8.46 in (215 mm)
Height: 11.69 in (297 mm)
Depth: 7.56 in (192 mm)
Operating altitude: 3280.84...9842.52 ft. (1000...3000 m) limited to 2000 m for the Corner Grounded distribution network with current derating 1 % per 100 m<= 3280.84 ft. (1000 m) without derating
Tightening torque: 11.5 lbf.in (1.3 N.m) 11.5 lb.in L1/R, L2/S, L3/T0.6 N.m VIA, VIB, FM, FLA, FLB, FLC, RY, RC, F, R, RES
Vibration resistance: 1 gn 13...200 Hz EN/IEC 60068-2-81.5 mm 3...13 Hz EN/IEC 60068-2-6
Shock resistance: 15 gn 11 ms IEC 60068-2-27
Electrical connection: Terminal 0 in² (2.5 mm²) AWG 14 VIA, VIB, FM, FLA, FLB, FLC, RY, RC, F, R, RESTerminal 6 mm² AWG 10 L1/R, L2/S, L3/T
Insulation resistance: >= 1 MOhm 500 V DC for 1 minute
motor power kW: 1.5 kW
[Us] rated supply voltage: 380...480 V - 15...10 %
Relative humidity: 5...95 % without condensation IEC 60068-2-35...95 % without dripping water IEC 60068-2-3
Protection type: Motor phase break motorBreak on the control circuit driveThermal power stage driveOvervoltages on the DC bus driveAgainst exceeding limit speed driveAgainst input phase loss driveWith PTC probes motorInput phase breaks driveLine supply overvoltage and undervoltage driveLine supply undervoltage driveOvercurrent between output phases and earth driveOverheating protection driveShort-circuit between motor phases driveThermal protection motor
Response time: 2 ms +/- 0.5 ms FM analog7 ms +/- 0.5 ms FLA, FLC discrete7 ms +/- 0.5 ms FLB, FLC discrete7 ms +/- 0.5 ms RY, RC discrete
Switching frequency: 12...16 kHz with derating factor6...16 kHz adjustable
Apparent power: 2.8 kVA 380 V
Electromagnetic compatibility: Conducted radio-frequency immunity test level 3 IEC 61000-4-6Voltage dips and interruptions immunity test IEC 61000-4-111.2/50 µs - 8/20 µs surge immunity test level 3 IEC 61000-4-5Electrical fast transient/burst immunity test level 4 IEC 61000-4-4Electrostatic discharge immunity test level 3 IEC 61000-4-2Radiated radio-frequency electromagnetic field immunity test level 3 IEC 61000-4-3
Product or component type: Variable speed drive
prospective line Isc: 5 kA
Pollution degree: 2 IEC 61800-5-1
Continuous output current: 3.7 A 380 V3.7 A 460 V
Product destination: Asynchronous motors
Maximum transient current: 4 A 60 s
Product specific application: Pumps and fans in HVAC
Speed drive output frequency: 0.5...200 Hz
Assembly style: With heat sink
Nominal switching frequency: 12 kHz
Environmental characteristic: Classes 3C1 IEC 60721-3-3Classes 3S2 IEC 60721-3-3
Phase: 3 phases
Noise level: 48 dB 86/188/EEC
Speed range: 1...10
Motor power hp: 2 hp
Speed accuracy: +/- 10 % of nominal slip 0.2 Tn to Tn
Torque accuracy: +/- 15 %
Ambient air temperature for operation: 14...104 °F (-10...40 °C) without derating> 104...122 °F (> 40...50 °C) with derating factor
Supply voltage limits: 323...528 V
Transient overtorque: 120 % of nominal motor torque +/- 10 % 60 s
Ambient air temperature for storage: -13...158 °F (-25...70 °C)

Supply frequency: 50...60 Hz - 5...5 %
Asynchronous motor control profile: Voltage/frequency ratio, 2 pointsVoltage/frequency ratio, automatic IR compensation (U/f + automatic Uo)Voltage/frequency ratio - Energy Saving, quadratic U/fFlux vector control without sensor, standardVoltage/frequency ratio, 5 points
Network frequency: 47.5...63 Hz
Regulation loop: Adjustable PI regulator
Product certifications: C-TickCSAULNOM 117
EMC filter: Class C1 EMC filter integrated
Motor slip compensation: Not available in voltage/frequency ratio motor controlAutomatic whatever the loadAdjustable
Marking: CE
Line current: 3.2 A 380 V2.6 A 480 V
Local signaling: 1 LED red DC bus energized
Output voltage: <= power supply voltage
Isolation: Electrical between power and control
Type of cable: IEC cable without mounting kit 1 113 °F (45 °C) copper 90 °C XLPE/EPRIEC cable without mounting kit 1 45 °C copper 70 °C PVCUL 508 cable with UL Type 1 kit 3 40 °C copper 75 °C PVC
Supply: Internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 % <= 10 A overload and short-circuit protectionInternal supply 24 V DC 21...27 V <= 200 A overload and short-circuit protection
Analogue input number: 2
Analogue input type: Switch-configurable voltage VIA 0...10 V DC 24 V max 30000 Ohm 10 bitsConfigurable voltage VIB 0...10 V DC 24 V max 30000 Ohm 10 bitsConfigurable PTC probe VIB 0...6 probes 1500 OhmSwitch-configurable current VIA 0...20 mA 250 Ohm 10 bits
Sampling duration: 2 ms +/- 0.5 ms F discrete2 ms +/- 0.5 ms R discrete2 ms +/- 0.5 ms RES discrete3.5 ms +/- 0.5 ms VIA analog22 ms +/- 0.5 ms VIB analog
Accuracy: +/- 0.6 % VIA for a temperature variation 60 °C+/- 0.6 % VIB for a temperature variation 60 °C+/- 1 % FM for a temperature variation 60 °C
Linearity error: +/- 0.15 % of maximum value input VIA+/- 0.15 % of maximum value input VIB+/- 0.2 % output FM
Analogue output number: 1
Analogue output type: Switch-configurable voltage FM 0...10 V DC 7620 Ohm 10 bitsSwitch-configurable current FM 0...20 mA 970 Ohm 10 bits
Discrete output number: 2
Discrete output type: Configurable relay logic FLA, FLC NO 100000 cyclesConfigurable relay logic FLB, FLC NC 100000 cyclesConfigurable relay logic RY, RC NO 100000 cycles
Minimum switching current: 3 mA 24 V DC configurable relay logic
Maximum switching current: 5 A 250 V AC resistive cos phi = 1 L/R = 0 ms FL, R5 A 30 V DC resistive cos phi = 1 L/R = 0 ms FL, R2 A 250 V AC inductive cos phi = 0.4 L/R = 7 ms FL, R2 A 30 V DC inductive cos phi = 0.4 L/R = 7 ms FL, R
Discrete input type: Programmable F 24 V DC level 1 PLC 4700 OhmProgrammable R 24 V DC level 1 PLC 4700 OhmProgrammable RES 24 V DC level 1 PLC 4700 Ohm
Discrete input logic: Positive logic (source) F, R, RES <= 5 V >= 11 VNegative logic (sink) F, R, RES >= 16 V <= 10 V
Acceleration and deceleration ramps: Automatic based on the loadLinear adjustable separately from 0.01 to 3200 s
Braking to standstill: By DC injection
Dielectric strength: 3535 V DC between earth and power terminals5092 V DC between control and power terminals
Frequency resolution: 0.024/50 Hz analog input0.1 Hz display unit
Communication port protocol: LonWorksBACnetMETASYS N2APOGEE FLNModbus
Connector type: 1 RJ451 open style
Physical interface: 2-wire RS 485
Transmission frame: RTU
Transmission rate: 9600 bps or 19200 bps
Data format: 8 bits, 1 stop, odd even or no configurable parity
Type of polarization: No impedance
Number of addresses: 1...247
Communication service: Time out setting from 0.1 to 100 sRead holding registers (03) 2 words maximumMonitoring inhibitableWrite multiple registers (16) 2 words maximumRead device identification (43)Write single register (06)
Option card: Communication card LonWorks
Operating position: Vertical +/- 10 degree
Specific application: HVAC

Santa Clara Systems specializes in hard-to-find parts. Choose from our overstock inventory and save on ATV21HD11N4 . Santa Clara Systems carries 10,431 items from Telemecanique.