ATV630U55M3

Telemecanique - variable speed drive ATV630 - 5.5kW/7.5HP - 200...240V - IP21/UL type 1

Current response time:

8 Minutes 36 Seconds

*Santa Clara Systems is not a Telemecanique Authorized Distributor.

Description: variable speed drive ATV630 - 5.5kW/7.5HP - 200...240V - IP21/UL type 1
Product weight: 16.98 lb(US) (7.7 kg)
Range of product: Altivar Process ATV600
IP degree of protection: IP21
Standards: EN/IEC 61800-3EN/IEC 61800-3 environment 1 category C2EN/IEC 61800-3 environment 2 category C3UL 508CEN/IEC 61800-5-1IEC 61000-3-12IEC 60721-3IEC 61508IEC 13849-1
Device short name: ATV630
Width: 6.81 in (173 mm)
Height: 15.94 in (405 mm)
Depth: 9.09 in (231 mm)
Operating altitude: 1000...4800 m with current derating 1 % per 100 m<= 3280.84 ft. (1000 m) without derating
Vibration resistance: 1.5 mm peak to peak 2...13 Hz IEC 60068-2-61 gn 13...200 Hz IEC 60068-2-6
Shock resistance: 15 gn 11 ms IEC 60068-2-27
Electrical connection: Removable screw terminals 0.5...1.5 mm² AWG 20...AWG 16 controlScrew terminal 10 mm² AWG 8 motorScrew terminal 6 mm² AWG 10 line side
Insulation resistance: > 1 MOhm 500 V DC for 1 minute to earth
motor power kW: 5.5 kW normal duty4 kW heavy duty
[Us] rated supply voltage: 200...240 V - 15...10 %
Relative humidity: 5...95 % without condensation IEC 60068-2-3
Protection type: Safe torque off motorMotor phase break motorSafe torque off driveOverheating driveShort-circuit protection driveMotor phase break driveOverspeed driveBreak on the control circuit driveOvervoltages on the DC bus driveOverload of output voltage driveLine supply overvoltage driveLine supply phase loss driveLine supply undervoltage driveOvercurrent between output phases and earth driveThermal protection motorThermal protection drive
Switching frequency: 2...12 kHz adjustable4...12 kHz with derating factor
Degree of protection: UL type 1 UL 508C
Output voltage: <= power supply voltage
Product or component type: Variable speed drive
Permissible temporary current boost: 1.1 x In 60 s normal duty1.5 x In 60 s heavy duty
Noise level: 56 dB 86/188/EEC
Product specific application: Process and utilities
Motor slip compensation: AdjustableNot available in permanent magnet motor lawCan be suppressedAutomatic whatever the load
power dissipation in W: 47 W natural convection 200 V 4 kHz179 W forced convection 200 V 4 kHz
Acceleration and deceleration ramps: S, U or customizedLinear adjustable separately from 0.01 to 9000 s
Volume of cooling air: 27210.21 Gal/hr(US) (103 m3/h)
Variant: Standard version
Braking to standstill: By DC injection
Operating position: Vertical +/- 10 degree
Product destination: Synchronous motorsAsynchronous motors
THDI: <= 48 % from 80...100 % of load IEC 61000-3-12
Mounting mode: Wall mount
Frequency resolution: Display unitAnalog input
Electromagnetic compatibility: Conducted radio-frequency immunity test level 3 IEC 61000-4-61.2/50 µs - 8/20 µs surge immunity test level 3 IEC 61000-4-5Electrical fast transient/burst immunity test level 4 IEC 61000-4-4Electrostatic discharge immunity test level 3 IEC 61000-4-2Radiated radio-frequency electromagnetic field immunity test level 3 IEC 61000-4-3
EMC filter: Without EMC filter
Pollution degree: 2 EN/IEC 61800-5-1
Connector type: RJ45 Ethernet/Modbus TCP on the remote graphic terminalRJ45 Modbus serial on the remote graphic terminal
Physical interface: 2-wire RS 485 Modbus serial
Type of cooling: Forced convection
Transmission frame: RTU Modbus serial
Supply frequency: 50...60 Hz - 5...5 %
Transmission rate: 10/100 Mbit/s Ethernet IP/Modbus TCP4.8, 9.6, 19.2, 38.4 kbit/s Modbus serial
Ambient air temperature for operation: 5...122 °F (-15...50 °C) without derating122...140 °F (50...60 °C) with derating factor

Network number of phases: 3 phases
Exchange mode: Half duplex, full duplex, auto negotiation Ethernet/Modbus TCP
Ambient air temperature for storage: -40...158 °F (-40...70 °C)
Data format: 8 bits, configurable odd, even or no parity Modbus serial
Type of polarization: No impedance Modbus serial
Environmental characteristic: Chemical pollution resistance class 3C3 EN/IEC 60721-3-3Dust pollution resistance class 3S3 EN/IEC 60721-3-3
Motor power hp: 7.5 hp normal duty5 hp heavy duty
Number of addresses: 1...247 Modbus serial
Line current: 20.2 A 200 V normal duty17.1 A 240 V normal duty15.1 A 200 V heavy duty13 A 240 V heavy duty
Method of access: Slave Modbus TCP
Product certifications: DNV-GLTÜVATEX zone 2/22ATEX INERISULREACHCSA
prospective line Isc: 50 kA
Supply: Internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 % <= 10 mA overload and short-circuit protectionExternal supply for digital inputs 24 V DC 19...30 V <= 1.25 mA overload and short-circuit protectionInternal supply for digital inputs and STO 24 V DC 21...27 V <= 200 mA overload and short-circuit protection
Marking: CE
Apparent power: 7.1 kVA 240 V normal duty5.4 kVA 240 V heavy duty
Local signaling: 3 LEDs local diagnostic3 LEDs dual color embedded communication status4 LEDs dual color communication module status1 LED red presence of voltage
Continuous output current: 25.4 A 4 kHz normal duty18.7 A 4 kHz heavy duty
Maximum transient current: 27.9 A 60 s normal duty28.1 A 60 s heavy duty
Asynchronous motor control profile: Constant torque standardOptimized torque modeVariable torque standard
Synchronous motor control profile: Permanent magnet motor
Output frequency: 0.0001...0.5 kHz
Analogue input number: 3
Nominal switching frequency: 4 kHz
Analogue input type: Software-configurable voltage AI1, AI2, AI3 0...10 V DC 30 kOhm 12 bitsSoftware-configurable current AI1, AI2, AI3 0...20 mA/4...20 mA 250 Ohm 12 bits
Discrete input number: 8
Safety function: STO (safe torque off) SIL 3
Discrete input type: Programmable DI1...DI6 24 V DC 3.5 kOhmProgrammable as pulse input DI5, DI6 0...30 kHz 24 V DCSafe torque off STOA, STOB 24 V DC > 2.2 kOhm
Discrete input logic: Positive logic (source) DI1...DI6 < 5 V > 11 VNegative logic (sink) DI1...DI6 > 16 V < 10 VPositive logic (source) DI5, DI6 < 0.6 V > 2.5 VPositive logic (source) STOA, STOB < 5 V > 11 V
Input compatibility: Level 1 PLC EN/IEC 61131-2 DI1...DI6 discrete inputLevel 1 PLC IEC 65A-68 DI5, DI6 discrete inputLevel 1 PLC EN/IEC 61131-2 STOA, STOB discrete input
Communication port protocol: EthernetModbus serialModbus TCP
Option card: Communication module Profibus DP V1 slot ACommunication module Profinet slot ACommunication module DeviceNet slot ACommunication module Modbus TCP/Ethernet/IP slot ACommunication module CANopen daisy chain RJ45 slot ACommunication module CANopen SUB-D 9 slot ACommunication module CANopen screw terminals slot ADigital and analog I/O extension module slot A/slot BOutput relay extension module slot A/slot BCommunication module Ethernet IP/Modbus TCP/MD-Link slot A
Analogue output number: 2
Analogue output type: Software-configurable voltage AO1, AO2 0...10 V DC 470 Ohm 10 bitsSoftware-configurable current AO1, AO2 0...20 mA 10 bits
Sampling duration: 2 ms +/- 0.5 ms DI1...DI4 discrete input5 ms +/- 1 ms DI5, DI6 discrete input5 ms +/- 0.1 ms AI1, AI2, AI3 analog input10 ms +/- 1 ms AO1 analog output
Accuracy: +/- 0.6 % AI1, AI2, AI3 for a temperature variation 60 °C analog input+/- 1 % AO1, AO2 for a temperature variation 60 °C analog output
Linearity error: +/- 0.15 % of maximum value analog input AI1, AI2, AI3+/- 0.2 % analog output AO1, AO2
Relay output number: 3
Relay output type: Configurable relay logic R1 fault relay NO/NC 100000 cyclesConfigurable relay logic R2 sequence relay NO 100000 cyclesConfigurable relay logic R3 sequence relay NO 100000 cycles
Refresh time: 5 ms +/- 0.5 ms R1, R2, R3 relay output
Minimum switching current: 5 mA 24 V DC R1, R2, R3 relay output
Maximum switching current: 3 A 250 V AC resistive 1 R1, R2, R3 relay output3 A 30 V DC resistive 1 R1, R2, R3 relay output2 A 250 V AC inductive 0.4 7 ms R1, R2, R3 relay output2 A 30 V DC inductive 0.4 7 ms R1, R2, R3 relay output
Isolation: Between power and control terminals
Specific application: Utility
Discrete and process manufacturing: Building - HVAC compressor centrifugalFood and beverage processing other applicationMining mineral and metal fanMining mineral and metal pumpOil and gas fanWater and waste water other applicationBuilding - HVAC screw compressorFood and beverage processing pumpFood and beverage processing fanFood and beverage processing atomizationOil and gas electro submersible pump (ESP)Oil and gas water injection pumpOil and gas jet fuel pumpOil and gas compressor for refineryWater and waste water centrifuge pumpWater and waste water positive displacement pumpWater and waste water electro submersible pump (ESP)Water and waste water screw pumpWater and waste water lobe compressorWater and waste water screw compressorWater and waste water compressor centrifugalWater and waste water fanWater and waste water conveyorWater and waste water mixer
Power range: 4...6 kW 200...240 V 3 phases
Motor starter type: Variable speed drive

Santa Clara Systems specializes in hard-to-find parts. Choose from our overstock inventory and save on ATV630U55M3 . Santa Clara Systems carries 10,431 items from Telemecanique.