Out of Stock

LC1D25JD

Telemecanique - Contactor

Product Summary:

IP degree of protection: IP20 front face conforming to IEC 60529
Standards: CSA C22.2 No 14
Device short name: LC1D
Width: 45 mm
Height: 85 mm

Current response time:

By 5AM PT on Wednesday

Emergency?

*Santa Clara Systems is not a Telemecanique Authorized Distributor.

Description: Contactor
IP degree of protection: IP20 front face conforming to IEC 60529
Standards: CSA C22.2 No 14
Device short name: LC1D
Width: 45 mm
Height: 85 mm
Depth: 101 mm
Protective treatment: TH conforming to IEC 60068-2-30
[Ui] rated insulation voltage: Power circuit: 690 V conforming to IEC 60947-4-1
[Uimp] rated impulse withstand voltage: 6 kV conforming to IEC 60947
Operating altitude: 3000 m without
Mechanical durability: 30 Mcycles
Tightening torque: Control circuit: 1.7 N.m - on screw clamp terminals - with screwdriver flat Ø 6 mm
Connections - terminals: Control circuit: screw clamp terminals 1 cable(s) 1…4 mm²flexible without cable end
Range: TeSys
Mounting support: Plate
[Ith] conventional free air thermal current: 10 A (at 60 °C) for signalling circuit
Product name: TeSys D
[Uc] control circuit voltage: 12 V DC
Electrical durability: 1.65 Mcycles 25 A AC-3 at Ue <= 440 V
Insulation resistance: > 10 MOhm for signalling circuit
motor power kW: 5.5 kW at 220...230 V AC 50/60 Hz (AC-3)
[Ie] rated operational current: 25 A (at <60 °C) at <= 440 V AC AC-3 for power circuit
Control circuit voltage limits: Drop-out: 0.1...0.25 Uc DC (at 60 °C)
Poles description: 3P
Overvoltage category: III
Operating time: 53.55...72.45 ms closing
Associated fuse rating: 10 A gG for signalling circuit conforming to IEC 60947-5-1
Control circuit type: DC standard
Product or component type: Contactor
Contactor application: Motor control

Utilisation category: AC-1
Power pole contact composition: 3 NO
[Ue] rated operational voltage: Power circuit: <= 690 V AC 25...400 Hz
motor power HP (UL / CSA): 3 hp at 230/240 V AC 50/60 Hz for 1 phase motors
Auxiliary contact composition: 1 NO + 1 NC
Irms rated making capacity: 140 A AC for signalling circuit conforming to IEC 60947-5-1
Rated breaking capacity: 450 A at 440 V for power circuit conforming to IEC 60947
[Icw] rated short-time withstand current: 240 A 40 °C - 10 s for power circuit
Average impedance: 2 mOhm - Ith 40 A 50 Hz for power circuit
Power dissipation per pole: 3.2 W AC-1
Safety cover: With
Safety reliability level: B10d = 1369863 cycles contactor with nominal load conforming to EN/ISO 13849-1
Maximum operating rate: 3600 cyc/h 60 °C
Coil technology: Built-in bidirectional peak limiting diode suppressor
Time constant: 28 ms
inrush power in W: 5.4 W (at 20 °C)
hold-in power consumption in W: 5.4 W at 20 °C
Auxiliary contacts type: type mechanically linked 1 NO + 1 NC conforming to IEC 60947-5-1
Signalling circuit frequency: 25...400 Hz
Minimum switching current: 5 mA for signalling circuit
Minimum switching voltage: 17 V for signalling circuit
Non-overlap time: 1.5 ms on de-energisation between NC and NO contact
Pollution degree: 3
Ambient air temperature for operation: -5…60 °C
Ambient air temperature for storage: -60…80 °C
Permissible ambient air temperature around the device: -40…70 °C at Uc
Fire resistance: 850 °C conforming to IEC 60695-2-1
Flame retardance: V1 conforming to UL 94
Mechanical robustness: Vibrations contactor open: 2 Gn, 5...300 Hz
Net weight: 0.53 kg
Circularity Profile: End of Life Information

Santa Clara Systems specializes in hard-to-find parts. Choose from our overstock inventory and save on LC1D25JD . Santa Clara Systems carries 10,643 items from Telemecanique.