Out of Stock

LC7K0910B7

Telemecanique - TeSys K contactor - 3P - AC-3 <= 440 V 9 A - 1 NO aux. - 24 V AC coil

Product Summary:

Product weight: 26.68 lb(US) (12.1 kg)
Range of product: TeSys D
IP degree of protection: IP2x front face conforming to IEC 60529
Standards: IEC 60947-4-1IEC 60947-5-1UL 508EN 60947-4-1CSA C22.2 No 14EN 60947-5-1
Device short name: LC3D

Current response time:

By 5AM PT on Wednesday

Emergency?

*Santa Clara Systems is not a Telemecanique Authorized Distributor.

Description: TeSys K contactor - 3P - AC-3 <= 440 V 9 A - 1 NO aux. - 24 V AC coil
Product weight: 26.68 lb(US) (12.1 kg)
Range of product: TeSys D
IP degree of protection: IP2x front face conforming to IEC 60529
Standards: IEC 60947-4-1IEC 60947-5-1UL 508EN 60947-4-1CSA C22.2 No 14EN 60947-5-1
Device short name: LC3D
Width: 17.72 in (450 mm)
Height: 21.85 in (555 mm)
Depth: 8.07 in (205 mm)
Protective treatment: TH conforming to IEC 60068-2-30
[Ui] rated insulation voltage: 600 V certifications CSA power circuit600 V certifications UL power circuit600 V certifications CSA signaling circuit600 V certifications UL signaling circuit1000 V conforming to IEC 60947-4-1 power circuit1000 V conforming to IEC 60947-1 signaling circuit
[Uimp] rated impulse withstand voltage: 8 kV conforming to IEC 60947
Operating altitude: 9842.52 ft. (3000 m) without derating in temperature
Mechanical durability: 8 Mcycles
Tightening torque: 106.19 lbf.in (12 N.m) power circuit connector flat Ø 6...8 mm10.62 lbf.in (1.2 N.m)for control circuit connector flat Ø 6 mm10.62 lbf.in (1.2 N.m)for control circuit connector Philips No 2
Connections - terminals: Connector power circuit 1 0.02...0.19 in² (10...120 mm²) flexible without cable endConnector power circuit 2 0.02...0.08 in² (10...50 mm²) flexible without cable endConnector power circuit 1 0.02...0.19 in² (10...120 mm²) flexible with cable endConnector power circuit 2 0.02...0.08 in² (10...50 mm²) flexible with cable endConnector power circuit 1 0.02...0.19 in² (10...120 mm²) solid without cable endConnector power circuit 2 0.02...0.08 in² (10...50 mm²) solid without cable endConnector for control circuit 1 0...0 in² (1...2.5 mm²) flexible without cable endConnector for control circuit 2 0...0 in² (1...2.5 mm²) flexible without cable endConnector for control circuit 1 0...0 in² (1...2.5 mm²) flexible with cable endConnector for control circuit 2 0...0 in² (1...2.5 mm²) flexible with cable endConnector for control circuit 1 0...0 in² (1...2.5 mm²) solid without cable endConnector for control circuit 2 0...0 in² (1...2.5 mm²) solid without cable end
Range: TeSys
Mounting support: Plate
System Voltage: <= 690 V AC 25...400 Hz power circuit
Operating rate: 30 cyc/hat <= 140 °F (60 °C)
Product name: TeSys D
[Uc] control circuit voltage: 110 V AC 50/60 Hz
Electrical durability: 0.95 Mcycles 115 A AC-3 <= 440 V
Insulation resistance: > 10 MOhm signaling circuit
motor power kW: 110 kW at 380/400 V AC 50/60 Hz110 kW at 415 V AC 50/60 Hz110 kW at 440 V AC 50/60 Hz63 kWat 220/230 V AC 50/60 Hz
[Ie] rated operational current: 115 A (<= 140 °F (60 °C)) AC AC-3for power circuit at <= 440 V
Utilization category: AC-3

Control circuit voltage limits: 0.3...0.5 Uc at 131 °F (55 °C) drop-out 50/60 Hz0.8...1.15 Uc at 131 °F (55 °C) operational 50/60 Hz
Poles description: 3 x 3P
Overvoltage category: III
Control circuit type: AC 50/60 Hz
Product or component type: Star delta starter
Pollution degree: 3
Starting time: 30 s
Ambient air temperature for storage: -76...176 °F (-60...80 °C)
Contactor application: Motor control
Coil technology: Without built-in suppressor module
Ambient air temperature for operation: -40...158 °F (-40...70 °C) at Uc
Device presentation: Pre-wired
inrush power in VA: 280...350 VAat 68 °F (20 °C) 0.8 60 Hz280...350 VAat 68 °F (20 °C) 0.8 50 Hz
Fire resistance: 1562 °F (850 °C) conforming to IEC 60695-2-1
hold-in power consumption in VA: 2...18 VAat 68 °F (20 °C) 0.3 60 Hz2...18 VAat 68 °F (20 °C) 0.3 50 Hz
Flame retardance: V1 conforming to UL 94
Pole contact composition: 3 x 3 NO
Heat dissipation: 3...8 W at 50/60 Hz
Mechanical robustness: Vibrations contactor open 2 Gn, 5...300 HzVibrations contactor closed 4 Gn, 5...300 HzShocks contactor closed 15 Gn for 11 msShocks contactor open 6 Gn for 11 ms
Auxiliary contacts type: Mechanically linked conforming to IEC 60947-5-1 3 x 1 NO + 1 NCMirror contact conforming to IEC 60947-4-1 3 x 1 NC
Signaling circuit frequency: 25...400 Hz
Minimum switching current: For signaling circuit
Switching voltage: 17 Vfor signaling circuit
Non-overlap time: 1.5 ms on energisation between NC and NO contact1.5 ms on de-energisation between NC and NO contact
Auxiliary contact composition: 1 NC KM2 line contactor1 NO KM3 delta contactor
Interlocking type: Mechanical
Product certifications: CSALROS (Lloyds register of shipping)RINABVGOSTDNVGLCCCUL

Santa Clara Systems specializes in hard-to-find parts. Choose from our overstock inventory and save on LC7K0910B7 . Santa Clara Systems carries 10,643 items from Telemecanique.