Out of Stock

XCC1406PR10K

Telemecanique - incremental encoder Ø 40 - solid shaft 6 mm - 1000 points - push-pull

Current response time:

By 5AM PT on Friday

Emergency?

*Santa Clara Systems is not a Telemecanique Authorized Distributor.

Description: incremental encoder Ø 40 - solid shaft 6 mm - 1000 points - push-pull
Product weight: 0.78 lb(US) (0.355 kg)
Range of product: OsiSense XCC
IP degree of protection: IP54 conforming to IEC 60529
Vibration resistance: 10 gn (f = 10...500 Hz) conforming to IEC 60068-2-6
Shock resistance: 30 gn 11 ms conforming to IEC 60068-2-27
Electrical connection: Cable radial shielded
[Us] rated supply voltage: 11...30 V DC
Protection type: Short-circuit protection, Reverse polarity protection
Enclosure material: Zamak, Aluminium
Cable length: 6.56 ft (2 m)
Resolution: 1000 points
Encoder type: Incremental encoder
Shaft tolerance: G7
Marking: CE
Cable outer diameter: 0.24 in (6 mm)
Ambient air temperature for operation: -4...176 F (-20...80 C)
Encoder name: XCC
Residual ripple: 500 mV
Ambient air temperature for storage: -22...185 F (-30...85 C)
Product specific application: -
Maximum revolution speed: 9000 rpm

Diameter: 1.57 in (40 mm)
Shaft moment of inertia: 0 lb.in (10 g.cm)
Shaft diameter: 0.24 in (6 mm)
Torque value: 0.02 lbf.in (0.002 N.m)
Shaft type: Solid shaft
Maximum load: 1 daN axial, 2 daN radial
Resistance to electrostatic discharge: 4 kV (contact discharge) level 3 conforming to IEC 61000-4-2, 8 kV (air discharge) level 3 conforming to IEC 61000-4-2
Output frequency: 100 kHz
Resistance to electromagnetic fields: 9.14 V/yd (10 V/m) level 3 conforming to IEC 61000-4-3
Output stage: Type K
Number of channels: 3
Resistance to fast transients: 1 kV (signal ports) level 3 conforming to IEC 61000-4-4, 2 kV (power ports) level 3 conforming to IEC 61000-4-4
Type of output stage: Driver push-pull
Current consumption: 0...75 mA (no-load)
Maximum output current: 40 mA
Cable composition: 8 x 0.14 mm
Output level: Low level: 1.5 V maximum (20 mA), High level: V supply - 3 V minimum (20 mA)
Surge withstand: 1 kV, level 2 conforming to IEC 61000-4-5
Base material: Zamak, Aluminium
Shaft material: Aluminium, Stainless steel
Type of ball bearings: 688AZZ1

Santa Clara Systems specializes in hard-to-find parts. Choose from our overstock inventory and save on XCC1406PR10K . Santa Clara Systems carries 10,301 items from Telemecanique.