ABE7S16E2B1

Telemecanique - sub-base - soldered solid state output relay ABE7 - 16 inputs - 24 V DC

Current response time:

By 5AM PT on Friday

Emergency?

*Santa Clara Systems is not a Telemecanique Authorized Distributor.

Description: sub-base - soldered solid state output relay ABE7 - 16 inputs - 24 V DC
Product weight: 0.82 lb(US) (0.37 kg)
Range of product: Advantys Telefast ABE7
IP degree of protection: IP2x conforming to IEC 60529
Standards: IEC 61131-2 Type 1
[Ui] rated insulation voltage: 2000 V
[Uimp] rated impulse withstand voltage: 2.5 kV conforming to IEC 60947-1
Tightening torque: 5.31 lbf.in (0.6 N.m) (with flat Ø 3.5 mm)
Connections - terminals: Screw type terminals, clamping capacity: 1 x 0.09...1 x 1.5 mm², cable cross section: 0...0 in² (0.09...1.5 mm²) AWG 28...AWG 16 flexible with cable endScrew type terminals, clamping capacity: 1 x 0.14...1 x 2.5 mm², cable cross section: 0...0 in² (0.14...2.5 mm²) AWG 26...AWG 12 solidScrew type terminals, clamping capacity: 1 x 0.14...1 x 2.5 mm², cable cross section: 0...0 in² (0.14...2.5 mm²) AWG 26...AWG 14 flexible without cable endScrew type terminals, clamping capacity: 2 x 0.09...2 x 0.75 mm², cable cross section: 0...0 in² (0.09...0.75 mm²) AWG 28...AWG 20 flexible with cable endScrew type terminals, clamping capacity: 2 x 0.2...2 x 2.5 mm², cable cross section: 0...0 in² (0.2...2.5 mm²) AWG 24...AWG 14 solid
Shock resistance: 15 gn 11 ms conforming to IEC 60068-2-27
Vibration resistance: 2 gn (f = 10...150 Hz) conforming to IEC 60068-2-6
[Us] rated supply voltage: 24 V DC (PLC end)24 V DC (sensor end)
Protection type: Internal fuse of 1 A (5 x 20 mm), fast blow type at PLC endAdjustable by external fuse, fast blow type at sensor end
Response time: <= 0.05 ms from state 0 to 1<= 0.4 ms from state 1 to 0
Switching frequency: <= 1000 Hz duty cycle: 50 %
Terminal block type: Removable
Dielectric strength: 2000 V 50/60 Hz conforming to IEC 60947-1
Product or component type: Solid state input relay sub-base
Supply voltage limits: 19...30 V DC (PLC end) conforming to IEC 61131-2

Product certifications: CSALROS (Lloyds register of shipping)ULDNVBVGL
isolation PLC/operative part: Yes
Number of channels: 16
Number of terminal per channel: 2
Fixing mode: By clips on 35 mm symmetrical DIN railBy screws on solid plate with fixing kit
Resistance to incandescent wire: 1382 °F (750 °C) conforming to IEC 60695-2-11
Current per channel: 0.012 A
Current state 1 guaranteed: >= 2 mA (sensor end)
Voltage state 1 guaranteed: >= 15 V (sensor end)
Resistance to electrostatic discharge: 4 kV (contact) conforming to IEC 61000-4-2 level 38 kV (air) conforming to IEC 61000-4-2 level 3
Maximum switching current: 15 mA (PLC end)
Resistance to radiated fields: 9.14 V/yd (10 V/m) (26000000...1000000000 Hz) conforming to IEC 61000-4-3 level 3
Minimum switching current: 1 mA (PLC end)
Resistance to fast transients: 2 kV conforming to IEC 61000-4-4 level 3
Ambient air temperature for operation: 23...140 °F (-5...60 °C) conforming to IEC 61131-2
Ambient air temperature for storage: -40...176 °F (-40...80 °C) conforming to IEC 61131-2
Pollution degree: 2 conforming to IEC 60664-1
Installation category: II conforming to IEC 60664-1

Santa Clara Systems specializes in hard-to-find parts. Choose from our overstock inventory and save on ABE7S16E2B1 . Santa Clara Systems carries 10,460 items from Telemecanique.