LUB12

Telemecanique - power base - TeSys U - 12 A - screw clamps control

Current response time:

13 Minutes 27 Seconds

*Santa Clara Systems is not a Telemecanique Authorized Distributor.

Description: power base - TeSys U - 12 A - screw clamps control
Product weight: 1.98 lb(US) (0.9 kg)
IP degree of protection: IP20 front panel and wired terminals conforming to IEC 60947-1, IP20 other faces conforming to IEC 60947-1, IP40 front panel outside connection zone conforming to IEC 60947-1
Standards: CSA C22.2 No 14 type E, EN 60947-6-2, IEC 60947-6-2, UL 508 type E with phase barrier
Device short name: LUB
Width: 1.77 in (45 mm)
Height: 5.71 in (145 mm)
Depth: 4.96 in (126 mm)
Protective treatment: TH conforming to IEC 60068
[Ui] rated insulation voltage: 600 V conforming to CSA C22.2 No 14, 600 V conforming to UL 508, 690 V conforming to IEC 60947-1 3
[Uimp] rated impulse withstand voltage: 6 kV conforming to IEC 60947-6-2
Operating altitude: 6561.68 ft. (2000 m)
Mechanical durability: 15000000 cycles
Tightening torque: Control circuit: 7.08...10.62 lbf.in (0.8...1.2 N.m) - with screwdriver 0.2 in (5 mm) flat, Control circuit: 7.08...10.62 lbf.in (0.8...1.2 N.m) - with screwdriver 0.2 in (5 mm) Philips no 1, Power circuit: 16.81...22.12 lbf.in (1.9...2.5 N.m) - with screwdriver 0.24 in (6 mm) flat, Power circuit: 16.81...22.12 lbf.in (1.9...2.5 N.m) - with screwdriver 0.24 in (6 mm) Philips No 2
Connections - terminals: Power circuit: screw clamp terminals 2 cable 0...0.01 in (1.5...6 mm) - cable stiffness: flexible - without cable end, Control circuit: screw clamp terminals 1 cable 0...0 in (0.34...1.5 mm) - cable stiffness: flexible - with cable end, Control circuit: screw clamp terminals 1 cable 0...0 in (0.75...1.5 mm) - cable stiffness: flexible - without cable end, Control circuit: screw clamp terminals 1 cable 0...0 in (0.75...1.5 mm) - cable stiffness: rigid - without cable end, Control circuit: screw clamp terminals 2 cable 0...0 in (0.34...1.5 mm) - cable stiffness: flexible - with cable end, Control circuit: screw clamp terminals 2 cable 0...0 in (0.75...1.5 mm) - cable stiffness: flexible - without cable end, Control circuit: screw clamp terminals 2 cable 0...0 in (0.75...1.5 mm) - cable stiffness: rigid - without cable end, Power circuit: screw clamp terminals 1 cable 0...0.02 in (1...10 mm) - cable stiffness: rigid - without cable end, Power circuit: screw clamp terminals 1 cable 0...0.01 in (1...6 mm) - cable stiffness: flexible - with cable end, Power circuit: screw clamp terminals 1 cable 0...0.02 in (2.5...10 mm) - cable stiffness: flexible - without cable end, Power circuit: screw clamp terminals 2 cable 0...0.01 in (1...6 mm) - cable stiffness: flexible - with cable end, Power circuit: screw clamp terminals 2 cable 0...0.01 in (1...6 mm) - cable stiffness: rigid - without cable end
Range: TeSys
[Ith] conventional free air thermal current: 12:00 AM
System Voltage: 230 V, 440 V, 500 V, 690 V
Operating rate: 60 cyc/mn
Product name: TeSys U
[Uc] control circuit voltage: 110...220 V DC, 110...240 V AC 50/60 Hz, 24 V AC 50/60 Hz, 24 V DC, 48 V AC 50/60 Hz, 48...72 V DC
Shock resistance: 10 gn power poles open conforming to IEC 60068-2-27, 15 gn power poles closed conforming to IEC 60068-2-27
Vibration resistance: 2 gn 5...300 Hz power poles open conforming to IEC 60068-2-27, 4 gn 5...300 Hz power poles closed conforming to IEC 60068-2-27
[Ie] rated operational current: 12 A at <= 440 V, 12 A at 500 V, 9 A at 690 V
Utilization category: AC-41, AC-43, AC-44

Poles description: 3P
Operating time: 35 ms opening with LUCA, LUCB, LUCC, LUCD, LUCM control circuit, 50 ms at >= 72 V closing with LUCA, LUCB, LUCC, LUCD control circuit, 60 ms at 48 V closing with LUCA, LUCB, LUCC, LUCD control circuit, 70 ms at 24 V closing with LUCA, LUCB, LUCC, LUCD control circuit, 75 ms closing with LUCM control circuit
Auxiliary contact composition: 1 NO + 1 NC
Heat dissipation: 2 W for control circuit with LUCA, LUCB, LUCC, LUCD, 1.7 W for control circuit with LUCM
Auxiliary contacts type: Type linked contacts (1 NO + 1 NC) conforming to IEC 60947-4-1, Type mirror contact (1 NC) state of the power conforming to draft IEC 60947-1
Immunity to micro breaks: 3 ms
Immunity to voltage dips: 70 % 500 ms conforming to IEC 61000-4-11
Product or component type: Non reversing power base
Network frequency: 40...60 Hz
Product certifications: BV, ATEX, LROS (Lloyds register of shipping), UL, GOST, GL, ABS, ASEFA, DNV, CSA, CCC
Device application: Motor
[Ics] rated service breaking capacity: 10 kA 500 V, 4 kA 690 V, 50 kA 230 V, 50 kA 440 V
Suitability for isolation: Yes
Typical current consumption: 130 mA at 24 V DC I maximum while closing with LUCA, LUCB, LUCC, LUCD, 140 mA at 24 V AC I maximum while closing with LUCA, LUCB, LUCC, LUCD, 150 mA at 24 V DC I maximum while closing with LUCM, 280 mA at 110...220 V DC I maximum while closing with LUCA, LUCB, LUCC, LUCD, 280 mA at 110...240 V AC I maximum while closing with LUCA, LUCB, LUCC, LUCD, 280 mA at 48...72 V AC I maximum while closing with LUCA, LUCB, LUCC, LUCD, 280 mA at 48...72 V DC I maximum while closing with LUCA, LUCB, LUCC, LUCD, 35 mA at 110...220 V DC I rms sealed with LUCA, LUCB, LUCC, LUCD, 35 mA at 110...240 V AC I rms sealed with LUCA, LUCB, LUCC, LUCD, 35 mA at 48...72 V AC I rms sealed with LUCA, LUCB, LUCC, LUCD, 35 mA at 48...72 V DC I rms sealed with LUCA, LUCB, LUCC, LUCD, 60 mA at 24 V DC I rms sealed with LUCA, LUCB, LUCC, LUCD, 70 mA at 24 V AC I rms sealed with LUCA, LUCB, LUCC, LUCD, 70 mA at 24 V DC I rms sealed with LUCM
Safety reliability level: B10d 1369863 cycles contactor with nominal load conforming to EN/ISO 13849-1, B10d 20000000 cycles contactor with mechanical load conforming to EN/ISO 13849-1
Ambient air temperature for operation: -13...140 F (-25...60 C) with LUCM, -13...158 F (-25...70 C) with LUCA, LUCB, LUCC, LUCD
Ambient air temperature for storage: -40...185 F (-40...85 C)
Fire resistance: 1202 F (650 C) conforming to IEC 60695-2-12, 1760 F (960 C) parts supporting live components conforming to IEC 60695-2-12
Safe separation of circuit: 400 V SELV between the control and auxiliary circuits conforming to IEC 60947-1 appendix N, 400 V SELV between the control or auxiliary circuit and the main circuit conforming to IEC 60947-1 appendix N
Resistance to electrostatic discharge: 8 kV level 3 in open air conforming to IEC 61000-4-2, 8 kV level 4 on contact conforming to IEC 61000-4-2
Resistance to radiated fields: 9.14 V/yd (10 V/m) 3 conforming to IEC 61000-4-3
Resistance to fast transients: 2 kV class 3 serial link conforming to IEC 61000-4-4, 4 kV class 4 all circuits except for serial link conforming to IEC 61000-4-4
Non-dissipating shock wave: 1 kV serial mode 24...240 V AC conforming to IEC 60947-6-2, 1 kV serial mode 48...220 V DC conforming to IEC 60947-6-2, 2 kV common mode 24...240 V AC conforming to IEC 60947-6-2, 2 kV common mode 48...220 V DC conforming to IEC 60947-6-2
Immunity to radio electric fields: 10 V conforming to IEC 61000-4-6

Santa Clara Systems specializes in hard-to-find parts. Choose from our overstock inventory and save on LUB12 . Santa Clara Systems carries 10,296 items from Telemecanique.