• Telemecanique LTMR27MFM Barcode

LTMR27MFM

Product Summary:

  • Product weight: 1.17 lb(US) (0.53 kg)
  • IP degree of protection: IP20
  • Standards: IEC 60947-4-1EN 60947-4-1UL 508CSA C22.2 No 14IACS E10
  • Device short name: LTMR
  • Width: 3.58 in (91 mm)
Get a Quote

Current response time:

10 Minutes 35 Seconds
  • Description: motor controller LTMR TeSys T - 100..240 V AC 27 A for Modbus
  • Product weight: 1.17 lb(US) (0.53 kg)
  • IP degree of protection: IP20
  • Standards: IEC 60947-4-1EN 60947-4-1UL 508CSA C22.2 No 14IACS E10
  • Device short name: LTMR
  • Width: 3.58 in (91 mm)
  • Height: 2.4 in (61 mm)
  • Depth: 4.82 in (122.5 mm)
  • Protective treatment: 12 x 24 hour cycles conforming to EN/IEC 60068-2-3048 h conforming to EN/IEC 60070-2-11TH conforming to EN/IEC 60068
  • [Ui] rated insulation voltage: 690 V conforming to CSA C22.2 No 14690 V conforming to EN/IEC 60947-1690 V conforming to UL 508
  • [Uimp] rated impulse withstand voltage: 4 kV supply, inputs and outputs conforming to EN/IEC 60947-4-16 kV current or voltage measurement circuit conforming to EN/IEC 60947-4-10.8 kV communication circuit conforming to EN/IEC 60947-4-1
  • Operating altitude: <= 6561.68 ft. (2000 m) without derating
  • Tightening torque: 4.42...5.31 lbf.in (0.5...0.6 N.m), 0.12 in (3 mm) flat screwdriver control circuit
  • Connections - terminals: Connector, 1 flexible cable with cable end 0...0 in² (0.25...2.5 mm²) /AWG 24...AWG 14 control circuitConnector, 1 flexible cable without cable end 0...0 in² (0.2...2.5 mm²) /AWG 24...AWG 14 control circuitConnector, 1 flexible cable without cable end 0...0 in² (0.25...2.5 mm²) /AWG 24...AWG 14 control circuitConnector, 1 solid cable without cable end 0...0 in² (0.2...2.5 mm²) /AWG 24...AWG 14 control circuitConnector, 2 flexible cable with cable end 0...0 in² (0.2...1 mm²) /AWG 24...AWG 14 control circuitConnector, 2 flexible cable without cable end 0...0 in² (0.2...1.5 mm²) /AWG 24...AWG 14 control circuitConnector, 2 flexible cable without cable end 0...0 in² (0.5...1.5 mm²) /AWG 24...AWG 14 control circuitConnector, 2 solid cable without cable end 0...0 in² (0.2...1 mm²) /AWG 24...AWG 14 control circuit
  • Range: TeSys
  • Operating rate: 1800 cyc/h
  • Product name: TeSys T
  • [Us] rated supply voltage: 100...240 V AC 50/60 Hz
  • Overvoltage category: III
  • Associated fuse rating: 0.5 A gG control circuit4 A gG output
  • Protection type: Power factor variationReverse polarity protectionThermal overload protectionLocked rotorOverloadPhase unbalancePhase failureOverload (long time)Thermal protectionLoad fluctuationEarth-leakage protection
  • Product certifications: BVCCCULEACLROS (Lloyds register of shipping)DNVATEXABSRMRoSC-TickNOMKERIGLRINACSA
  • Short-circuit withstand: 100 kA conforming to EN/IEC 60947-4-1
  • Product or component type: Motor controller
  • Fire resistance: 1202 °F (650 °C) conforming to EN/IEC 60695-2-121760 °F (960 °C) conforming to UL 94
  • Device application: Equipment monitoring and control
  • Ambient air temperature for operation: -4...140 °F (-20...60 °C)
  • Measurement current: 1.35...27 A
  • Network and machine diagnosis type: Waiting time after overload trippingStarting current and timeTrip context informationFault recordingRemaining operating time before overload trippingMotor control command recordingRunning hours counter/operating timePhase fault and earth fault trip countersEvent recordingTrip history information
  • Ambient air temperature for storage: -40...176 °F (-40...80 °C)
  • Logic input number: 6
  • Current consumption: 8...62.8 mA
  • Input current: 3.1 mA at 100 V7.5 mA at 240 V
  • Mechanical robustness: shocks half sine wave acceleration (15 Gn for 11 ms) conforming to EN/IEC 60068-2-27? vibrations mounted on symmetrical rail (1 Gn, 5...300 Hz) conforming to EN/IEC 60068-2-6? vibrations plate mounted (4 Gn, 5...300 Hz) conforming to EN/IEC 60068-2-6
  • Supply voltage limits: 93.5...264 V AC
  • Input/output type: Logic input : 0...40 V and <= 15 mA 25 ms (at state 0)Logic input : 79...264 V and >= 2 mA 25 ms (at state 1)
  • Communication port protocol: Modbus
  • Maximum operating frequency: 2 Hz
  • Bus type: Modbus 2-wire RS 485 interface, addressing 1...247, transmission rate 1.2...19.2 kbit/s, RJ45 with 2 shielded twisted pairsModbus 2-wire RS 485 interface, addressing 1...247, transmission rate 1.2...19.2 kbit/s, terminal block with 2 shielded twisted pairs
  • Load current: 5 A at 250 V AC logic output5 A at 30 V DC logic output
  • Permissible power: 480 VA (AC-15), Ie = 2 A, 500000 cycles (output)30 W (DC-13), Ie = 1.25 A, 500000 cycles (output)
  • Contacts type and composition: 1 NO + 1 NC fault signal3 NO
  • Metering type: Imbalance currentTemperaturePhase current I1, I2, I3 RMSEarth-fault currentAverage current Iavg
  • Measurement accuracy: 3 % power factor (cos ? > 0.6)+/- 30 min/year internal clock0,02 temperature5...15 % earth fault current internal measurement (for current > 0.2 A)1 % current1 % voltage (100...830 V)5 % active and reactive power5 % earth fault current external measurement (< 5 % or 0.01 A)
  • Connection pitch: 0.2 in (5.08 mm)
  • Pollution degree: 3
  • Electromagnetic compatibility: electrostatic discharge 3 (8 kV air, 6 kV contact), conforming to EN/IEC 61000-4-2? fast transients immunity test other circuits level 3 (2 kV), conforming to EN/IEC 61000-4-4? fast transients immunity test on supply and relay outputs level 4 (4 kV), conforming to EN/IEC 61000-4-4? conducted RF disturbances (10 V), conforming to EN/IEC 61000-4-6? surges serial mode (1 kV) control circuit, conforming to EN/IEC 61000-4-5? surges common mode (2 kV) communication, conforming to EN/IEC 61000-4-5? surges common mode (2 kV) control circuit, conforming to EN/IEC 61000-4-5? radiated RF fields 3 (10 V/m), conforming to EN/IEC 61000-4-3? voltage dips and interruptions immunity test (70 %, 500 ms), conforming to EN/IEC 61000-4-11? surges serial mode (0.5 kV) temperature sensor, conforming to EN/IEC 61000-4-5? surges common mode (1 kV) temperature sensor, conforming to EN/IEC 61000-4-5? surges serial mode (2 kV) relay outputs and supply, conforming to EN/IEC 61000-4-5? surges common mode (4 kV) relay outputs and supply, conforming to EN/IEC 61000-4-5
  • Web services: Web server
  • Compatibility code: LTMR
Santa Clara Systems specializes in hard-to-find parts. Choose from our overstock inventory and save on LTMR27MFM . Santa Clara Systems carries 10,643 items from Telemecanique.
  • Motor Controller Ltmr Tesys T - 100..240 V Ac 27 A For Modbus

Alternates

    Common Typos

    • 1TMR27MFM
    • 1TMRZ7MFM
    • ITMR27MFM
    • ITMRZ7MFM
    • LTMRZ7MFM

    Appended Numbers

    • LTMR27MFM-A
    • LTMR27MFM-B
    • LTMR27MFM-C
    • LTMR27MFM-D
    • LTMR27MFM-E
    • LTMR27MFM-F
    • LTMR27MFM-G
    • LTMR27MFM-H
    • LTMR27MFM-I
    • LTMR27MFM-J
    • LTMR27MFM-K
    • LTMR27MFM-L
    • LTMR27MFM-M
    • LTMR27MFM-N
    • LTMR27MFM-O
    • LTMR27MFM-P
    • LTMR27MFM-Q
    • LTMR27MFM-R
    • LTMR27MFM-S
    • LTMR27MFM-T
    • LTMR27MFM-U
    • LTMR27MFM-V
    • LTMR27MFM-W
    • LTMR27MFM-X
    • LTMR27MFM-Y
    • LTMR27MFM-Z

    More Products Like This

    Customers Are Also Buying

    We Deliver!

    Late West Coast Shipping Hours
    Late West Coast Shipping (5PM PST)
    Drop-Ship and Blind-Ship Specialists
    Expertly Packed Static-Limited
    Same-Day Service
    In-House Courier
    visa credit card logo mastercard credit card logo discover credit card logo american express credit card logo

    Customers we work with

    3M logo
    Kaiser Permanente logo
    Safeway Logo
    Georgia-Pacific logo
    Coca Cola logo
    duke energy logo
    BART logo
    Pepsi logo
    LA DWP logo
    US Navy logo
    Dean Foods logo
    ConAgra Brands logo