Out of Stock

XMLG100D23

Telemecanique - Pressure Sensor

Product Summary:

Product weight: 0.21 lb(US) (0.095 kg)
Range of product: OsiSense XM
Standards: CEEN/IEC 61326-2-3
Height: 58.1 mm
Protective treatment: TC

Current response time:

17 Minutes 25 Seconds

*Santa Clara Systems is not a Telemecanique Authorized Distributor.

Description: Pressure Sensor
Product weight: 0.21 lb(US) (0.095 kg)
Range of product: OsiSense XM
IP degree of protection: IP66 conforming to EN/IEC 60529IP67 conforming to EN/IEC 60529
Standards: CEEN/IEC 61326-2-3
Height: 58.1 mm
Protective treatment: TC
[Uimp] rated impulse withstand voltage: 0.5 kV
Mechanical durability: >= 10000000 cycles
Vibration resistance: 20 gn (f = 9...2000 Hz) conforming to EN/IEC 60028-2-6
Shock resistance: 25 gn 11 ms conforming to EN/IEC 60068-2-27
Electrical connection: 3 pins 1 male connector M12
[Us] rated supply voltage: 12 V DC, voltage limits: 8...33 V24 V DC, voltage limits: 8...33 V
Protection type: Reverse polarityLoad short-circuit
Length: 1.91 in (48.5 mm)
Pressure setting range: 0...1450.38 psi (0...100 bar)
Product or component type: Electronic pressure sensors
Maximum permissible accidental pressure: 3263.35 psi (225 bar)
Product certifications: EACUL 508CSA C22.2 No 14
Pressure sensor type: Pressure transmitter
Destruction pressure: 3625.94 psi (250 bar)
Pressure sensor name: XMLG
Local display: Without
Ambient air temperature for operation: 5...185 °F (-15...85 °C)
Pressure sensor size: 1450.38 psi (100 bar)

Electrical circuit type: Control circuit
Ambient air temperature for storage: -40...185 °F (-40...85 °C)
Fluid connection type: 1/4" - 18 NPT (male)
Current consumption: < 20 mA
Controlled fluid: Fresh water (0...125 °C)Air (5...257 °F (-15...125 °C))Corrosive fluid (5...257 °F (-15...125 °C))Hydraulic oil (5...257 °F (-15...125 °C))
Materials in contact with fluid: Stainless steel type AISI 303FPM (Viton)CeramicPPS
Type of output signal: Analogue
Operating position: Any position
Resistance to electrostatic discharge: 15 kV (in air) conforming to EN/IEC 61000-4-28 kV (on contact) conforming to EN/IEC 61000-4-2
Analogue output function: 4...20 mA, 2 wires
Resistance to electromagnetic fields: 182.88 V/yd (200 V/m) (80...1000 Hz) conforming to EN/IEC 61000-4-3
Surge withstand: 1 kV (42 Ohm) conforming to EN/IEC 61000-4-5500 kV (12 Ohm) conforming to EN/IEC 61000-4-5
Resistance to fast transients: 4 kV conforming to EN/IEC 61000-4-4
Resistance to conducted disturbances: 30 V (0.15...80 Hz) conforming to EN/IEC 61000-4-6
Quantity per set: Set of 1
Response time on output: < 2 ms
Resistance to magnetic fields: 30 A/m conforming to EN/IEC 61000-4-8
Type of packing: Individual
Drift of the sensitivity: +/- 0.015 % of measuring range/°C
Diameter: 0.9 in (22.8 mm)
Drift of the zero point: +/- 0.015 % of measuring range/°C
NEMA degree of protection: NEMA 4
Measurement accuracy: +/- 0.3 % of the measuring range
Repeat accuracy: +/- 0.1 % of the measuring range

Santa Clara Systems specializes in hard-to-find parts. Choose from our overstock inventory and save on XMLG100D23 . Santa Clara Systems carries 10,643 items from Telemecanique.