CPX-E-PN

Festo - Bus Module

Product Summary:

Ambient temperature: -5 °C ... 50 °C
Dimensions W x L x H: 42.2 mm x 76.5 mm x 125.8 mm
Width dimension: 18.9 mm
Type of mounting: With H-rail
Max. number of modules: 10

Current response time:

By 5AM PT on Wednesday

Emergency?

Description: Bus Module
Ambient temperature: -5 °C ... 50 °C
Dimensions W x L x H: 42.2 mm x 76.5 mm x 125.8 mm
Width dimension: 18.9 mm
Type of mounting: With H-rail
Max. number of modules: 10
Mounting position: Vertical - Horizontal
Note on ambient temperature: -5 - 60 °C for vertical installation
Storage temperature: -20 °C ... 70 °C
Relative air humidity: 95 % - Non-condensing
Degree of protection: IP20
Corrosion resistance class (CRC): 0 - No corrosion stress
Vibration resistance: Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6
Shock resistance: Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27
Protection against direct and indirect contact: PELV
LABS (PWIS) conformity: VDMA24364 zone III
CE marking (see declaration of conformity): As per EU EMC directive
Diagnostics via LED: Force mode - Network error - Network status, port 1 - Network status, port 2 - Power supply for electronics/sensors - Load power supply - System fault - Maintenance required
Diagnostics via bus: Wire break - Short circuit - PROFIsafe addresses different - Parameterization error - Upper limit value violated - Over temperature - Lower limit value not complied with - Undervoltage
Fieldbus interface, type: Ethernet
Fieldbus interface, protocol: PROFINET IRT - PROFINET RT
Fieldbus interface, function: Bus connection, incoming/forwarding
Fieldbus interface, connection type: 2x socket
Fieldbus interface, connection technology: RJ45
Fieldbus interface, connection pattern: 00995789
Fieldbus interface, number of poles/wires: 8

Fieldbus interface, galvanic isolation: Yes
Fieldbus interface, transmission rate: 100 Mbit/s
Max. address capacity inputs: 64 byte
Fieldbus interface, max. address volume for inputs: 64 byte
Information on inputs: 62 bytes with I/O diagnostic interface - 62 bytes with status bits - 64 bytes without diagnostics
62 bytes with I/O diagnostic interface 62 bytes with status bits 64 bytes without diagnostics: 64 byte
Fieldbus interface, max. address volume for outputs: 64 byte
Note on outputs: 62 bytes with I/O diagnostic interface - 64 bytes with status bits - 64 bytes without diagnostics
System parameter: Diagnostic memory - Fail-safe response - Force mode - System start
Module parameters: Channel alarms for undervoltage - Analog module process value representation
Configuration support: GSDML file
Additional functions: LLDP - MRP - MRPD - PROFINET FSU - PROFINET I&MO..3, 1..3 retentive memory possible - PROFINET Shared device - S2 system redundancy - SNMP
Power supply, function: Electronics and sensors
Power supply, type of connection: Terminal strip
Power supply, note on connection type: > 4 A and UL 2x terminal strip for power supply
Power supply, connection technology: Spring-loaded terminal
Power supply, connection pattern: 00995847
Power supply, number of pins/wires: 4
Nominal operating voltage DC for electronics/sensors: 24 V
Permissible voltage fluctuations for electronics/sensors: ± 25 %
Power supply, conductor diameter: 0.2 mm² ... 1.5 mm²
Power supply, information on conductor diameter: 0.2 - 2.5 mm² for flexible conductors without cable end sleeves
Max. power supply: 8 A
Intrinsic current consumption at nominal operating voltage for electronics/sensors: Typically 75 mA
Power failure buffering: 20 ms
Reverse polarity protection: 24 V sensor supply against 0 V sensor supply

Santa Clara Systems specializes in hard-to-find parts. Choose from our overstock inventory and save on CPX-E-PN . Santa Clara Systems carries 9,904 items from Festo.

We are in the process of adding data and downloadable material for this item. Please search similar items for more information related to this product.