ABL8WPS24200

Telemecanique - regulated SMPS - 3-phase - 380..500 V AC - 24 V - 20 A

Current response time:

By 5AM PT on Monday

Emergency?

*Santa Clara Systems is not a Telemecanique Authorized Distributor.

Description: regulated SMPS - 3-phase - 380..500 V AC - 24 V - 20 A
Product weight: 3.53 lb(US) (1.6 kg)
Range of product: Phaseo
IP degree of protection: IP20 conforming to EN/IEC 60529
Standards: UL 508CSA C22.2 No 60950-1
Width: 3.74 in (95 mm)
Height: 5.63 in (143 mm)
Depth: 6.1 in (155 mm)
Operating altitude: 6561.68 ft. (2000 m)
Connections - terminals: Screw type terminals input connection, connection capacity: 3 x 0.5...3 x 4 mm² AWG 22...AWG 12Screw type terminals input ground connection, connection capacity: 1 x 0.5...1 x 4 mm² AWG 22...AWG 12Screw type terminals output connection, connection capacity: 4 x 0.5...4 x 10 mm² AWG 22...AWG 8Removable screw terminal block diagnostic relay, connection capacity: 2 x 2.5 mm²
Mounting support: 35 x 15 mm symmetrical DIN rail35 x 7.5 mm symmetrical DIN rail
Overvoltage category: Class I conforming to VDE 0106-1
Relative humidity: 0...90 % during operation0...95 % in storage
Input voltage: 380...500 V AC three phase, terminal(s): L1, L2, L3
Input voltage limits: 320...550 V
Product certifications: CB SchemeRCMEACKC
Product or component type: Power supply
Network frequency: 47...63 Hz
Power supply type: Regulated switch mode
Inrush current: <= 25 A 2 ms
Environmental characteristic: EMC conforming to EN 61000-6-1EMC conforming to EN 61000-6-3EMC conforming to EN/IEC 61000-6-2EMC conforming to EN/IEC 61000-6-4EMC conforming to EN/IEC 61204-3Safety conforming to EN 61204-4Safety conforming to EN/IEC 60950-1Safety conforming to SELV

Cos phi: 0.65
Output voltage: 24 V DC
Efficiency: 92%
Ambient air temperature for storage: -40...158 °F (-40...70 °C)
rated power in W: 480 W
Output voltage limits: 24...28.8 V adjustable
Provided equipment: Power factor correction filter conforming to IEC 61000-3-2
power dissipation in W: 38.4 W
Power supply output current: 20 A
Line and load regulation: 1...3 %
Dielectric strength: Between input and groundBetween output and groundBetween input and output
Output protection type: Against overload, protection technology: manual or automatic resetAgainst overvoltage, protection technology: 30...32 V, manual resetAgainst short-circuits, protection technology: manual or automatic resetAgainst undervoltage, protection technology: tripping if U < 21.6 VThermal, protection technology: automatic reset
Holding time: >= 18 ms at 400 V
Ambient air temperature for operation: 122...140 °F (50...60 °C) with-13...122 °F (-25...50 °C) without
Permissible temporary current boost: 1.5 x In for 4 s
Marking: CE
Operating position: Vertical
Output coupling: SeriesParallel
Name of test: Harmonic current emission conforming to EN/IEC 61000-3-2Conducted emissions on the power line conforming to EN 55022 Class BElectrostatic discharges conforming to EN/IEC 61000-4-2Induced electromagnetic field conforming to EN/IEC 61000-4-6Magnetic field conforming to EN 61000-4-8Primary outage conforming to IEC 61000-4-11Radiated electromagnetic field conforming to EN/IEC 61000-4-3Radiated emissions conforming to EN 55022 Class BRapid transient conforming to IEC 61000-4-4Surge conforming to EN/IEC 61000-4-5
status LED: 1 LED green and red output voltage1 LED green, red and orange output current

Santa Clara Systems specializes in hard-to-find parts. Choose from our overstock inventory and save on ABL8WPS24200 . Santa Clara Systems carries 10,460 items from Telemecanique.