XPSCM1144P

Telemecanique - module XPS-CM - single-beam photo-electric sensors - 24 V DC

Current response time:

By 5AM PT on Monday

Emergency?

*Santa Clara Systems is not a Telemecanique Authorized Distributor.

Description: module XPS-CM - single-beam photo-electric sensors - 24 V DC
Range of product: Preventa Safety detection
IP degree of protection: IP20(terminals) conforming to IEC 60529, IP40(enclosure) conforming to IEC 60529
[Ui] rated insulation voltage: 300 V, degree of pollution 2 conforming to EN/IEC 60947-5-1, 300 V, degree of pollution 2 conforming to DIN VDE 0110 parts 1 and 2
[Uimp] rated impulse withstand voltage: 4 kV overvoltage category III, conforming to EN/IEC 60947-5-1, 4 kV overvoltage category III, conforming to DIN VDE 0110 parts 1 and 2
Connections - terminals: Captive screw clamp terminals, removable terminal block, clamping capacity: 1 x 0.25...1 x 2.5 mm flexible cable with cable end, without bezel, Captive screw clamp terminals, removable terminal block, clamping capacity: 2 x 0.2...2 x 1 mm solid cable without cable end, Captive screw clamp terminals, removable terminal block, clamping capacity: 2 x 0.25...2 x 1 mm flexible cable with cable end, without bezel, Captive screw clamp terminals, removable terminal block, clamping capacity: 2 x 0.5...2 x 1.5 mm flexible cable with cable end, with double bezel, Captive screw clamp terminals, removable terminal block, clamping capacity: 1 x 0.2...1 x 2.5 mm solid or flexible cable without cable end, Captive screw clamp terminals, removable terminal block, clamping capacity: 1 x 0.25...1 x 2.5 mm flexible cable with cable end, with bezel, Captive screw clamp terminals, removable terminal block, clamping capacity: 2 x 0.2...2 x 1.5 mm flexible cable without cable end
[Us] rated supply voltage: 24 V DC (- 20...20 %)
Associated fuse rating: 4 A gG for relay output conforming to DIN VDE 0660 part 200, 4 A gG for relay output conforming to EN/IEC 60947-5-1, 6 A fast blow for relay output conforming to DIN VDE 0660 part 200, 6 A fast blow for relay output conforming to EN/IEC 60947-5-1
Protection type: Electronic internal fuse
Breaking capacity: 1.5 A/24 V - L/R = 50 ms, DC-13 relay output, 20 mA/24 V for solid state output
Output type: Relay 2 NO (13-14, 23-24), volt-free
Input voltage: 24 V DC (terminal(s) U+, U-) muting function, 24 V DC sensor
Sensor power supply: 24 V DC (terminal(s) U+, U-)
Ambient air temperature for operation: 14...131 F (-10...55 C)
Product or component type: Safety module
Supply current for sensors: < 200 mA
Ambient air temperature for storage: -13...185 F (-25...85 C)
Safety module name: XPSCM

Input current: < 200 mA for muting function
Safety module application: For monitoring of single beam photo-electric sensor
Synchronisation time between inputs: 3 s (+/- 20 %) for the activation of the MA/MB muting signal
Function of module: Built-in muting
Muting maximum duration: 60 s (- 10...30 %)
Safety level: Can reach category 2 conforming to EN/ISO 13849-1 with the appropriate control system and correctly wired, Can reach SILCL 1 conforming to EN/IEC 62061 with the appropriate control system and correctly wired, Can reach PL = c conforming to EN/ISO 13849-1 with the appropriate control system and correctly wired
Line resistance: <= 10 Ohm for sensor power supply
Safety reliability data: MTTFd = 16.6 years conforming to EN/ISO 13849-1, DC = 95.5 % conforming to EN/ISO 13849-1, PFH = 3.12E-7 1/h conforming to EN/IEC 61508, PFHd = 3.12E-7 1/h conforming to EN/IEC 62061
Number of inputs: 2 (terminal(s) MA, MB) muting function, 4 (terminal(s) Z1, Z2, Z3, Z4) sensor
Input compatibility: XC limit switch muting function, XU2M18PP340... muting function, XU2S18PP340... (infrared) sensor, XU9M18PP340... muting function
Minimum output current: 10 mA relay output
Minimum output voltage: 17 V relay output
Response time on input open: <= 25 ms
Number of additional circuits: 0
Local signalling: 1 LED, function electronic internal fuse status, 1 LED, function restarting, 1 LED, function safety outputs closed, 1 LED, function safety outputs open, 1 incandescent lamp, function muting power consumption: 4...6.5 W
Output thermal current: 5.6 A per relay, 11 A maximum
power consumption in W: <= 15 W

Santa Clara Systems specializes in hard-to-find parts. Choose from our overstock inventory and save on XPSCM1144P . Santa Clara Systems carries 10,301 items from Telemecanique.