AP-C40W

Keyence - Pressure Sensor

Current response time:

19 Minutes 21 Seconds

Description: Pressure Sensor
Weight: Approx. 74 g (with 2-m 6.6' cable)
Footnotes: *1 The focus range applies while in focus mode only. *2 A response time of 100 or 500 ms applies if the AP-47 is used. *3 The maximum current is 20 mA if the AP-V42W (P) is installed as an expansion unit. *4 Only the AP-V41AW (P) (Master) and AP-C40W (P) apply.
Output: NPN output
Material: Front housing: Polysulfone, Rear housing: PBT, Front seat: Polycarbonate
Accessories: Power supply code (2-m 6.6' cable with connector), head connector, and unit seal
Applicable sensor head: AP-41M, AP-41, AP-43, AP-44
Display power: 3 1/2-digit, 2-color, 7-segment LED (Character height: 11 mm 0.43") Display cycle: 10 times/s
Set and display range: -15 to +110% of F.S. *1
Operation indicator: Red LED x 2 (corresponding to control output 1 and 2)
Resolution - Standard mode - AP-41M: 0.1 kPa, 1 mmHg, 0.1 inchHg, 0.001 bar
Resolution - Standard mode - AP-41: 0.1 kPa, 1 mmHg, 0.1 inchHg, 0.001 bar
Resolution - Standard mode - AP-43: 0.001 MPa, 0.01 kgf/cm2, 0.01 bar
Resolution - Standard mode - AP-44: 0.1 kPa, 1 mmHg, 0.1 inchHg, 0.02 psi, 0.001 bar
Resolution - Standard mode - AP-48: 0.1 kPa, 0.001 kgf/cm2, 0.02 psi, 0.001 bar
Resolution - Focus mode - AP-41M: 0.01 kPa, 0.1 mmHg, 0.01 inchHg, 0.002 psi, 0.1 mbar
Resolution - Focus mode - AP-41: 0.01 kPa, 0.1 mmHg, 0.01 inchHg, 0.002 psi, 0.1 mbar

Resolution - Focus mode - AP-43: 0.1 kPa, 0.001 kgf/cm2, 0.02 psi, 0.001 bar
Resolution - Focus mode - AP-44: 0.02 kPa, 0.2 mmHg, 0.2 inchHg, 0.004 psi, 0.2 mbar
Resolution - Focus mode - AP-48: 0.02 kPa, 0.2 kgf/cm2, 0.004 psi, 0.2 mbar
Hysteresis: Variable (Standard: 0.5% of FS; high-resolution/focus mode: 0.1% of F.S.)
Response time (chattering prevention function): 1 (in high-speed mode only), 2.5, 5, 100, or 500 ms (selectable) *2
I/O - Control output: NPN open collector 100 mA max. (at 40 V or below) *3 with max. residual voltage of 1 V, 2 outputs (NO or NC selectable)
Temperature characteristic: ±1% of F.S. or less
I/O - Analog output (selectable): 1 to 5 V with load impedance of 1 k? max. (or zero-shift input selectable)*4
I/O - Zero-shift input (selectable): Input time: 2 ms or more (or analog output selectable)
Rating - Power voltage: 12 to 24 VDC ±10% with ripple (p-p) of 10% max.
Rating - Power consumption - At 12 V - Normal: 780 mW (65mA) max./960 mW (80mA)max.
Rating - Power consumption - At 12 V - Eco mode: 540 mW (45mA) or less
Rating - Power consumption - At 24 V - Normal: 1080 mW (45mA) or less
Rating - Power consumption - At 24 V - Eco mode: 840 mW (35mA) or less
Environmental resistance - Ambient temperature: 0 to 50°C 32 to 122°F, no freezing
Environmental resistance - Ambient humidity: 35 to 85% RH (No condensation)
Environmental resistance - Vibration resistance: 10 to 55 Hz, 1.5 mm 0.06" double amplitude in X, Y, and Z directions, 2 hours respectively

Santa Clara Systems specializes in hard-to-find parts. Choose from our overstock inventory and save on AP-C40W . Santa Clara Systems carries 2,109 items from Keyence.

We are in the process of adding data and downloadable material for this item. Please search similar items for more information related to this product.