Out of Stock

PN7593

Efector - Pressure Sensor | PN-025-REG14-Qfrkg/US/ /V

Current response time:

12 Minutes 27 Seconds

Description: Pressure Sensor | PN-025-REG14-Qfrkg/US/ /V
Electrical Design: Pnp/Npn
Output Function: Normally Open / Closed; (Configurable)
Material: Stainless Steel (1.4404 / 316L); Pbt+Pc-Gf30; Pbt-Gf20; Pc
Measuring Element: Ceramic-Capacitive Pressure Measuring Cell
Media: Liquids And Gases
Medium Temperature [°C]: -25...80
Pressure Rating: 150 Bar 2175 Psi 15 Mpa
Min. Bursting Pressure: 350 Bar 5075 Psi 35 Mpa
Type Of Pressure: Relative Pressure
Operating Voltage [V]: 18...30 Dc; (According To En 50178 Selv/Pelv)
Current Consumption [Ma]: < 35
Min. Insulation Resistance [M?]: 100; (500 V Dc)
Protection Class: Iii
Reverse Polarity Protection: Yes
Power-On Delay Time [S]: < 0.3
Integrated Watchdog: Yes
Number Of Inputs And Outputs: Number Of Digital Outputs: 2
Total Number Of Outputs: 2
Output Signal: Switching Signal; Io-Link; (Configurable)
Number Of Digital Outputs: 2
Max. Voltage Drop Switching Output Dc [V]: 2.5
Permanent Current Rating Of Switching Output Dc [Ma]: 150; (200 (...60 °C) 250 (...40 °C))
Switching Frequency Dc [Hz]: < 170
Short-Circuit Protection: Yes
Type Of Short-Circuit Protection: Yes (Non-Latching)
Overload Protection: Yes
Measuring Range: 0...25 Bar 0...362 Psi 0...2.5 Mpa
Set Point Sp: 0.2...25 Bar 4...362 Psi 0.02...2.5 Mpa
Reset Point Rp: 0.1...24.9 Bar 2...360 Psi 0.01...2.49 Mpa
In Steps Of: 0.1 Bar 2 Psi 0.01 Mpa
Switch Point Accuracy [% Of The Span]: < ± 0,5
Repeatability [% Of The Span]: < ± 0,1; (With Temperature Fluctuations < 10 K)
Characteristics Deviation [% Of The Span]: < ± 0,25 (Bfsl) / < ± 0,5 (Ls); (Bfsl = Best Fit Straight Line; Ls = Limit Value Setting)

Hysteresis Deviation [% Of The Span]: < ± 0,25
Long-Term Stability [% Of The Span]: < ± 0,05; (Per 6 Months)
Temperature Coefficient Zero Point [% Of The Span / 10 K]: 0,2; (-25...80 °C)
Temperature Coefficient Span [% Of The Span / 10 K]: 0,2; (-25...80 °C)
Response Time [Ms]: < 3
Delay Time Programmable Ds, Dr [S]: 0...50
Parameter Setting Options: Hysteresis / Window; Normally Open / Closed; Switching Logic; Switch-On/Switch-Off Delay; Damping; Display Unit
Communication Interface: Io-Link
Transmission Type: Com2 (38,4 Kbaud)
Io-Link Revision: 1.1
Sdci Standard: Iec 61131-9
Io-Link Device Id: 402 D / 00 01 92 H
Profiles: Smart Sensor: Process Data Variable; Device Identification, Device Diagnosis
Sio Mode: Yes
Required Master Port Class: A
Process Data Analogue: 1
Process Data Binary: 2
Min. Process Cycle Time [Ms]: 2.3
Ambient Temperature [°C]: -25...80
Storage Temperature [°C]: -40...100
Protection: Ip 65; Ip 67
Emc: Din En 61000-6-2 Din En 61000-6-3
Shock Resistance: Din En 60068-2-27 50 G (11 Ms)
Vibration Resistance: Din En 60068-2-6 20 G (10...2000 Hz)
Ul Approval: Ul Approval Number J001
Pressure Equipment Directive: Sound Engineering Practice; Can Be Used For Group 2 Fluids; Group 1 Fluids On Request
Materials (Wetted Parts): Stainless Steel (1.4404 / 316L); Ceramics; Fkm
Min. Pressure Cycles: 100 Million
Tightening Torque [Nm]: 25...35; (Recommended Tightening Torque; Depends On Lubrication, Seal And Pressure Rating)
Process Connection: Threaded Connection G 1/4 External Thread Internal Threadm5
Display: Display Unit 3 X Led, Green (Bar, Psi, Mpa) Switching Status 2 X Led, Yellow Measured Values Alphanumeric Display, Red/Green 4-Digit
Connection: Connector: 1 X M12; Contacts: Gold-Plated
Alternate Manufacturer Name: IFM

Santa Clara Systems specializes in hard-to-find parts. Choose from our overstock inventory and save on PN7593 . Santa Clara Systems carries 2,349 items from Efector.

We are in the process of adding data and downloadable material for this item. Please search similar items for more information related to this product.